New Motors Products

Microstepping Motor/Driver provides high-accuracy positioning.

Modular, open-framed Nanostep(R) CFKII Series 5-phase microstepping motor and driver is available in high-torque motor frame sizes: 1.1, 1.65, 2.36, and 3.35 in. sq. Holding torques range from 4.6 oz-in. (CFK533AT) to 890 oz-in. (CFK5913HAT), and position accuracy is rated at +/-3 arc-minutes. Unit provides 16 user-selectable resolution settings up to 125,000 steps per revolution. Open-loop...

Brushless Gearmotors handle temperatures up to 155 deg C.

TitanTRUE Brushless Gearmotors are available in 2, 3, and 4 in. frame sizes with continuous rated torque up to 60, 127, and 244 in-lbs, respectively. Power transmission consists of True Planetary gearhead; CE rated brushless servomotor; optional emergency brake; and commutating, incremental encoder. Enclosure's modular design utilizes bearing seals, gaskets, and o-rings to provide IP64 and...

Motors are inverter-ready.

Severe Duty motors are available in ratings from 1/2 to 500. Constructed of iron, they are built with Class F insulation, Class B temperature rise, and 1.15 service factor. Motors through 575 V use ISR(TM) Inverter Spike Resistant wire. Processing motors provide corrosion resistant epoxy finish, regreasable ball bearings, oversized rotatable cast iron conduit boxes, and stainless steel nameplate....

Step Motors are suited to multiple applications.

Two-phase, 24-step P110 series miniature step motors are 0.63 in. in diameter and 0.75 in. long with holding torque ratings of 1.0 oz-in. Disc-magnet technology results in rotor inertia of 5.7 x 10E-06 oz-in-sec squared. Phase current in disc-magnet motors may be boosted up to 1.5-times nominal for P110. Construction includes magnetic circuit and samarium-cobalt magnet.

Key Considerations When Choosing a Power Cord

This white paper provides an overview of key considerations when choosing a power cord.

Gearmotors suit side-broom motors in floor care machines.

Right-angle MC 143 series gearmotor units offer sealed gearbox assemblies. Construction includes aluminum die-cast housings; all ball bearing design; metallic gearing with hardened, ground-steel worm; and forged-bronze gears. Units are available with 12-48 Vdc permanent-magnet motors, which deliver up to 800 in-lbs of intermittent torque. Applications include recreational vehicles with slide-out...

Dustproof Motor locks out contamination.

Abrasive Dustproof Series, sealed with built-in o-rings, has air fittings for pressurization up to 15 psi. Shaft slinger prevents abrasive dust from attacking shaft seal material, which in turn prevents dust from entering bearing. Motor is available in standard 23, 34, 42 and 65 frame sizes. Applications include industrial operations that use, produce or process powdered materials such as fiber...

Stepper Motors have chrome platens.

Linear stepper motors travel at speeds to 80 in./sec, with strokes to 144 in. and acceleration to 1G. 2- and 4-phase linear steppers are capable of up to 50 lbs continuous force and 65 lbs peak force. Resolution of 2-phase motors is 1 full step equals .010 in., and 1 microstep equals .00004 in. Resolution of 4-phase motors is 1 full step equals .005 in., and 1 microstep equals .00002 in. Motors...

Miniature DC Motors are 16mm in diameter.

16G88 Series DC ironless-rotor motors have continuous power rating of 4.5 W. They are available with choice of 6 windings for supply voltage from 3 to 24 V. Maximum recommended shaft speed is 12,000 rpm, and typical maximum continuous output torque is 5 mNm. All incorporate precious metal commutators and sleeve bearings. Matching 16mm dia planetary and spur gearheads are available with ratios...

Vertical Pump Motor directly replaces less efficient motors.

Mod-Max meets NEMA premium motor efficiency standards, operates 0.8 to 4.0% more efficiently than company's older, less efficient motors, and can be used for VFD applications. Canopy cap requires no gasket and has 3 stand-offs to allow air circulation to help prevent moisture condensation. Winding includes pulse endurance wire. Each winding is also treated with 100% solids insulation material....

Gearmotors/Speed Reducers operate at 95%+ efficiency.

90.1 Series helical bevel gear products are available as triple- or quadruple-reduction drives with foot, flange, or shaft mount configurations. They offer power ranges from 1/6 to 200 HP, output speeds from 0.1 to 218 rpm, torque up to 283,200 lb-in., and gear ratio ranges from 8.04:1 to over 300,000:1. Unicase(TM) housing eliminates oil leakage and contamination. Autovent sealing prevents...

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.