New Motors Products

New ODVA Conformant Drives and Motors Perform Positioning, Velocity and Motion Control Tasks

SV200 Digital Servo Drives provides advanced performance and auto-tuning with multiple control options. ST Stepper Drives includes stall detection, stall prevention, microstep emulation and anti-resonance. StepServo™ Integrated Motors features high-resolution incremental encoders and closed-loop servo firmware.

New PanelView Terminal and Servo Motors Minimize Contamination during Production

Stainless-steel PanelView Terminal protect product quality and simplifies the cleaning processes. Kinetix VPH hygienic servo motors includes high-grade stainless-steel housing and a smooth surface. Designed as per the EHEDG as well as 3-A sanitary standards and are IP69K rated.

New NEMA 24 Frame Integrated Motors from Applied Motion Products are IP65 Rated

Comes in SWM24IP-3DE and TXM24IP-1DG variants with Dual-Port Communication. Each motor features mounting flange and built-in encoder. SWM24IP-3DE performs stall detection and stall prevention while TXM24IP-1DG utilizes StepSERVO™ Closed-Loop Stepper technology.

New Generation 3 EC Motors from Rosenberg Meets CE, UL and RoHS Standards

Maximum electrical input power is 4.7 kW and input voltage range of 200-480 VAC (50/60 Hz) for greater power and efficiency. Comes with electronic quick-change technology. Used in hospitals and data centers for increasing system fault tolerance.

The Next Wave of Intelligent Design Automation

In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.

Armstrong Announces New Variable Speed Version ECM Pump-Less-Volute with Permanent Magnet Motor

Uses permanent magnet motor with up to 40% more efficiency than a standard induction motor. Provides complete repair solution for Armstrong dry rotor S&H and 1050 & 1060 Series. Can re-build or upgrade select B&G or Taco circulator models.

New Ghost Trolling Motor Available in 47-inch Shaft Model

Designed to work in 24 or 36 volt systems with up to 97 and 120 pounds of thrust as well as eliminates noisy operation. Pairs with HDS LIVE, HDS Carbon and Elite-Ti2 displays via NMEA 2000® connection. Helps anglers fish longer, run faster and get in close without making sound.

New PKP Series Motors with Mini Connector and New Design Advancements

High-resolution type motors are available in 42 mm (1.65 in.) to 56.5 (2.22 in.) mm with encoder option. Shortens the length of connector’s overhang reducing space. Includes motor resolution options, line driver encoder options, 400 p/rev options and PKP flat type motor with harmonic gearheads.

Oriental Motor Expands BMU and BLE2 Series DC Motor With Parallel Shaft

Brushless DC Motors are available in 30 W (1/25 HP), 60 W (1/12 HP) and 120 W (1/6 HP) power output. Includes H1 food-grade grease in gearhead for applications intended for food processing or packaging. Offer IP66 class protection and are equipped with a stainless steel parallel motor shaft.

New Three-phase AC Induction Motors with High Strength Right-angle Hypoid Gearhead

Hypoid gears increase torque while reducing noise due to the surface area utilized. Consists of high-strength bearing on both sides of the gearbox due to which radial and axial loads have increased. Mounted in any direction and are available in combination with 30 W, 40 W and 100 W motor models.

New H1 grease KIIS Series 3-phase Induction Motor with IP66 Class Protection Terminal Box

Available in 60 W (1/12 HP) and 100 W (1/8 HP) power output. Includes H1 food-grade grease in gearhead and a stainless steel output shaft for applications intended for food processing or packaging. Eight gear ratios from 5:1 up to 180:1 with life of gearhead rated at 5,000 hours.

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.