New Mills Products

Angle Rolling Machine features overhead CP swing arm.

Model 310HV4 can roll 6 x 1 Ã-½ in. flat bar hard way, 6 in. Schedule 40 pipe, 5 x 5/8 in. angle leg in, and 6 x 5/8 in. angle leg out with standard equipment. It operates in both horizontal and vertical positions and features lateral guides that are adjustable in all 3 axes. System consists of 3 driven rolls, double initial pinch, universal roll bending machine with independent hydraulic...

Come See What's New from the Particle Engineering & Process Specialists at Interphex 2011

Quadro Engineering, The Fitzpatrick Company and Microfluidics are teaming up at Interphex 2011 (March 29 - 31) in New York, in booths 3427, 3433 and 2071 respectively, to exhibit cutting-edge solutions to your particle engineering and processing needs. NEW from Quadro is the Ytron HV0-Emulsifier and Wet Mill, a formulation lab-scale machine that provides all the benefits of high velocity (HV)...

Bending Machine operates in horizontal and vertical positions.

Suited for rolling standard and special sections as well as tube and pipe in mild structural stainless steel, aluminum, brass, and copper, Carell 305HV Angle Rolling Machine features independent adjustment of both lateral bending rolls and powered rotation of all 3 bending rolls. Dual LED displays monitor bending roll positions, while double pinch geometry permits pre-bending of leading and...

Seco Tools to Showcase Processes and Products for the Oil and Gas Industry at HOUSTEX 2011

Troy, Michigan- Seco Tools will be demonstrating a range of processes and products relevant to the oil and gas industry at HOUSTEX 2011. The company will exhibit its products in booth #1100 at the event, which takes place April 18 - 20 at the George R. Brown Convention Center in Houston, Texas. In its booth, Seco will be presenting information on its new single-pass threading process for...

Choosing the Optimal IDC & Medical PPE Supplier

This white paper provides an in-depth overview into infectious disease control (IDC) medical PPE including development, key benefits, applications and product offerings.

Seco Tools to Showcase Wide Range of Tooling Solutions at AeroDef Manufacturing 2011

Troy, Michigan - Seco Tools will be demonstrating a comprehensive range of tooling solutions for aerospace and defense applications at AeroDef Manufacturing 2011. The company will exhibit its products in booth #1778 at the event, which takes place April 5 - 7 at the Anaheim Convention Center in Anaheim, California. In recent years, Seco Tools has concentrated heavily on developing tooling...

Machining Center features 30,000 rpm spindle.

Incorporating 40 x 30 in. solid concrete-polymer machining table and 1.2 kW machining spindle with feed rates of up to 550 ipm, M85 is suited for milling, drilling, and engraving aluminum, plastics, stainless steel, brass, and exotic composites. Features include spray-mist coolant system, 10-station Automatic Tool Changer (ATC) with tool database and tool-length sensor, PC, flat-screen monitor,...

Wet Mill has high-shear design.

Employing rotor-stator suspension milling technology, high shear Ytron HV-Wet Mill is available in 3 different models ranging from 25-125 hp with capacities up to 150 gpm. Energy optimized tooling operates at tip speeds up to 70 m/sec with low power consumption, while sanitary high-speed mechanical seal eliminates potential trap areas around rotor shaft, optimizing clean-in-lace results. Options...

Methods Named Exclusive North American Importer of Feeler Machine Tools

Announcement coincides with Introduction of All-New Line of High Performance Machine Tools. Sudbury, MA, U.S.A. - Methods Machine Tools, Inc., a leading supplier of innovative precision machine tools, has announced effective today, that they are the exclusive importer of Fair Friend Group's (FFG) FEELER line of machine tools throughout North America. FFG (Taipei, Taiwan) is one of the largest...

Universal Plastics Completes Installation of HASS Vertical Milling Machine

Provides streamline tooling for more competitive thermoforming of clamshell packaging Holyoke, MA - Universal Plastics has completed purchase and installation of a new HASS VM3 CNC Vertical milling machine. The milling machine is equipped with a 40 X 26 bed, 25 of vertical travel, and a 24 tool change. This machine combined with new CAD/CAM software allows us to direct machine tools for thin...

Homogenization Tester evaluates in-line process feasibility.

Suited for manufacturers of dispersions, emulsions, and slurries, Sanitary Homogenization Test Laboratory evaluates particle size reduction and de-agglomeration manufacturing processes. System utilizes dynamic in-line mixer or high shear colloid mill featuring rotor-stator mixing technology that exposes 100% of product to same shear action, with no bypass. Comprehensive test report with...

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.