Jaygo has an innovative Altern Mill - Ultra-Fine Wet Grinding Batch Mill
The Altern Mill is a clean, safe, closed milling system that offers high quality reproducible batches. The mill combines the features of a High Speed Disperser and with those of a Multi Media Mill into one State-of-the-Art unit. Typical products include Lipsticks, Cosmetics, Paints, Inks, Coatings, and Dyes. The unique grinding chamber reduces production time and decreases manufacturing costs....
Read More »
Thread Milling Cutter can machine materials up to 55 RC.
Available in T2711 and T2712 models, Thread Milling Cutter is suitable for machining threads of 1 in. diameter and above. Offering easy-cutting geometry, wear-resistant and universal grade WSM37S, unit is used for thread depths up to 2.5 DN and pitch range of 8-18 TPI for UNC and UNF thread styles. Ideal for ISO P, M, K, S and H, product can machine multiple thread sections.
Read More »
3 in. OD x .125 in. wall, ABBEY ETNA 2K Tube Mill For Sale
UTUBE NUMBER: 3429 SPECIFICATIONS: Maximum Tube Diameter: 3 (76.2 mm) Minimum Tube Diameter: 1 (25.4 mm) Maximum Wall Thickness: .125 (3.17 mm) Minimum Wall Thickness: .018 (.457 mm) Maximum D/T Ratio: 60:1 Minimum D/T Ratio: 10:1 Maximum Material Yield: 50,000 PSI Maximum Mill Speed: 50 FPM (15 M) Roll Space (Width) Forming: 10 Roll Space (Width) Fin & Sizing: 5 Driven Spindle Diameter: 2 Worm...
Read More »
VK4II CNC Knee Mill is equipped with 7.5 HP backgeared motor.
Having travel range of 33 (X) x 15 (Y) x 5.25 in. MillSlide™ (Z) with 16.5 in. (knee) and 5.9 in. quill, VK4II CNC Knee Mill features two-speed 3,900 rpm spindle. Programmed using G-code or a CAM system, unit comes with 8200B CNC with 1 GM memory, 2 GB disk storage and 12 in. LCD monitor. Offering ram travel of ±11.5 in. with ±90° head tilts, product is equipped with table guard, power knee...
Read More »
Things to Consider Before Designing Custom Packaging
This e-Book provides pre-design process considerations for custom corrugated packaging.
Read More »
Large Inventory of New and Used Tube Mills for Sale
NEW Tube Mill offering by Universal-Yoder-Kent: 3.125″ (79.3 mm) x .134″ (3.40 mm) UNIVERSAL Tube Mill Line (Built to Order) Specifications: http://www.utubeonline.com/product/3-inch-new-tube-mill-line/ Just Listed For Sale! ABBEY / MCKAY Tube Mill, Stock #3463B Specifications: http://www.utubeonline.com/product/abbey-mckay-used-tube-mill/ Just Listed For Sale! MCKAY Tube Mill Line, Stock...
Read More »
Aven Technik Tungsten Carbide Cutters
Cut through the toughest wires with ease. Designed to cut through hard wires such as guide wires, stents, catheters, and single/multiple fillers. The tungsten carbide blades have a hardness rating of 80-85 HRC for exceptional durability. ESD-safe, ergonomic hand grips provide protection against static build up. Ultra-responsive dual leaf springs provide easy opening and closing for reduced hand...
Read More »
Walter's Heptagon Milling Cutter comes with enhanced wiper inserts.
BLAXX M3024 Heptagon Milling Cutter is designed with two right-hand and two left-hand cutting edged wiper inserts. Used for both semi-finishing and finishing operations without adjusting the finishing cutting edges, product reduces machining time. Unit's inserts are available in XNGX0705ANN-F67 and LNHX13068R-L55T models. Combination of milling cutter and indexable inserts are used in multi-step...
Read More »
New! Never Installed Tube & Pipe Machinery for Sale
NEW! 3.125″ x .134″ UNIVERSAL Tube Mill Line, Stock #3462 Equipped With: KENT Double Uncoiler, KENT Shear & End Welder, KENT Horizontal Accumulator, YODER Forming Mill, Solid State HF Welder, YODER Sizing Mill, UCG Flying Cold Saw, (3) AC Motors and UCG Drive System Specifications: Max Tube O.D.: 3.125″ (79.3 mm) Min Tube O.D.: 1″ (25.4 mm) Max Round Wall: .134″ (3.40 mm) Max Shapes...
Read More »
NEW 3.125″ (79.3 mm) x .134″ (3.40 mm) UNIVERSAL Tube Mill Line
UTUBE NUMBER: 3462 MANUFACTURER: UNIVERSAL / KENT / YODER SPECIFICATIONS: Line Direction: Right to Left Driven Spindle Diameter: 2.5 (63.5 mm) Maximum Tube Diameter: 3.125 (79.3 mm) Minimum Tube Diameter: 1 (25 mm) Maximum Round Wall Thickness: .134 (3.4 mm) Maximum Shapes Wall Thickness: .120 (3 mm) Minimum Wall Thickness: .032 (.8 mm) Single Point Adjustment Rafted Welding Speed: 65 - 300 FPM...
Read More »
MC232 Perform Milling Cutters are available in 2, 3 and 4 flutes.
Designed in small diameters with cylindrical shank and larger diameters with weldon shank, MC232 Perform Solid Carbide Milling Cutters are suitable for lateral milling, full slotting, pocket milling, ramping and helical plunging operations. Featuring center cutting capability with 35° spiral, cutters are available in diameter range of 2 to 20 mm, cutters offer operation of different material...
Read More »
Precision Machining Solutions with Over 25 Years of Experience
Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.
Read More »