New Pramet Cutter With Universal Pocket for Octagonal, Round and Square Inserts
Dormer Pramet’s ISOD05 cutter is available in diameters ranging from 1.500” to 5.0”. The user-friendly tool is suitable for steel, stainless steel, cast iron and non-ferrous materials and high-performance alloys. The cutter is used to perform face milling, shoulder milling, slotting, plunging and ramping operations. The Pramet cutter with its range of inserts reduces tool change-over time...
Read More »
Seco Offers New Milling Tools to Optimize Manufacturing Processes
Seco New Tools include Double QuattroMill™ 22 face milling tools, Perfomax™ indexable insert drills, Feedmax -P drill and MZN and MBZ high feed milling cutters. Perfomax insert drills are offered in diameters ranging from 15 mm to 59 mm with length-to-length ratio of 2xD, 3xD, 4xD and 5xD. The drills feature a hardness of HRC 60. Solid Carbide Feedmax-P drills come with advanced TiAlN...
Read More »
Latest MC275/MC075 Ceramic Milling Cutters Enable Shorter Machining Times
Walter’s MC275/MC075 Ceramic Milling Cutters are designed to work on nickel-based alloys Inconel 718, synchronous milling, lateral milling, ramping, helical milling, and plunging operations. Units are available with 8–25 mm and a corner radius of 1–1.5 mm. These cutters increase productivity, cutting speeds and metal removal rate. Made from the combination of carbide and ceramic, units...
Read More »
Sandvik's Latest CoroMill® 331 Indexable Insert Cutters Come with Light Cutting Geometries
Sandvik’s CoroMill® 331 Indexable Insert Cutters enhance process security and component quality. Units provide 90° corners and increased metal removal rates. CoroMill 331 can be used with Silent Tools™ damped adapters and feature short arbor cutter bodies. The enhanced cutters are suitable for applications such as double half-side machining, shoulder milling, face milling, back-face...
Read More »
How to Select the Right Sprocket for Your Application
This ebook provides overview on how to select the right sprocket.
Read More »
CGM 750 Cone Mill Uses Vacuum Conveying System for Feeding
Kason’s 750 mm diameter CGM 750 Cone Mill is designed for grinding fatty, heat sensitive, sticky, moist or fragile materials. Unit delivers particle size distribution from 125 to 250 microns and features swing-down conical discharge chute for lowering 250 lb cone housing. This mill is constructed of 304 or 316 stainless steel with fully interlocked moving components with time-delay function....
Read More »
ISO H Advance Line of Solid Carbide Milling Cutters are tailored for hard machining.
ISO H Advance Line of solid carbide milling cutters is designated MC089 (high-feed cutting and pre-finishing), MC183 (side milling and finishing), MC187 (de milling, dynamic milling, and finishing), MC281 (mini end mills), MC388 (roughing and finishing), MC480 (mini ball-nose end mills), and MC482 (ball-nose end mills with two and four flutes). Mills feature mini and multi-flute, shoulder/slot,...
Read More »
Roland DGA to Showcase its Open Architecture MDX Series Mills at SOLIDWORKS World 2018
Irvine, Calif., Jan. 31, 2018 – Roland DGA will be demonstrating its latest 3D milling machines and other advanced digital devices at SOLIDWORKS World 2018, February 5-8, in Los Angeles. Held annually, this 3D design and technology event attracts thousands of SOLIDWORKS users, resellers, entrepreneurs, educators and students from all over the world. At this year’s show, Roland DGA will be...
Read More »
Jabro® Solid-Carbide Cutters come with continuous grades.
Jabro® Solid-Carbide Cutters are suitable for high-speed machining applications. Units feature optimized coatings that increase tool life. Cutters are designed for machining of tibial tray and femoral knee implant components and in machining of CoCr and 3-D printed Ti6Al4V ISO-S12 parts.
Read More »
Thread Milling Cutters can cut multiple pitches.
Offered in T2711and T2712 models, Thread Milling Cutters are used for machining UNC, UNF, M and MF thread sizes starting at 24 mm. Units are suitable to cut any pitch between 6-18 TPI. Allowing users to machine multiple thread sections simultaneously, unit’s enhanced insert and body allows cutting of M56 and M64 coarse-pitch threads.
Read More »
Mikron HSM 500 Graphite Mill is equipped with Step-Tec spindle.
Featuring high high-dynamic drives, polymer concrete base and spindle, Mikron HSM 500 Graphite Mill is suitable in wet and graphite applications. Product is embedded with Operator Support System, Intelligent Thermal Control and Advanced Process System. Unit’s Step-Tec spindle delivers a speed of up to 42,000-rpm and can pair with System 3R WorkPartner 1+ and an AgieCharmilles FORM P 250.
Read More »
Acoustic and Thermal Solutions for Original Equipment Manufacturers
Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.
Read More »
