New Xtratec XT M5008 Milling Cutter Configured with Shell Mill Mount
Available with diameter range of 5/8 – 2 1/2 in. that permits high feed per tooth at low axial depths of cut. Offers a wide range of precision tools for milling, turning, drilling and threading applications. Suiteable for die and moldmaking as well as for the aerospace. energy and medical device industries.
Read More »
New OptiMill-SPM Milling Cutters for HighiInfeed Depths
Exploit their strengths during the machining of structural parts made of aluminium. Operates without problems even with large wrapping also in the corners with enormous tool contact and a high load, the tool remains stable. Provides knurled roughing geometry that ensures power consumption during machining is significantly lower compared to tools with a straight cutting edge.
Read More »
New OptiMill-SPM Milling Cutters for HighiInfeed Depths
Exploit their strengths during the machining of structural parts made of aluminium. Operates without problems even with large wrapping also in the corners with enormous tool contact and a high load, the tool remains stable. Provides knurled roughing geometry that ensures power consumption during machining is significantly lower compared to tools with a straight cutting edge.
Read More »
New Cone Mills from Gericke are Ideal for Fine Particle Size Reduction
Available in three standard models that includes quick release, rotor assembly and a choice of screen sizes, hole shapes and patterns. Developed for milling materials from 150 μm to 12 mm. that allows the gap between the rotor and screen to be quickly adjusted based on the targeted particle size and shape. Offer built-in gap adjustment indicator verifying the particle size selected, efficiency,...
Read More »
Custom Progressive Metal Stamping for Manufacturing EMI Shielding
A Guide to Containing EM Radiation Through Custom Progressive Metal Stamping
Read More »
New Cone Mills from Gericke are Ideal for Fine Particle Size Reduction
Available in three standard models that includes quick release, rotor assembly and a choice of screen sizes, hole shapes and patterns. Developed for milling materials from 150 μm to 12 mm. that allows the gap between the rotor and screen to be quickly adjusted based on the targeted particle size and shape. Offer built-in gap adjustment indicator verifying the particle size selected, efficiency,...
Read More »
New JC899 Finisher and JC898 Rougher Handle Lengths or Stack Heights Ranging from 15 to 60 mm
JC899 features a patented two-inone geometry that eliminates problems with delamination and fiber pulling out when working with stacked materials. Offers three to six times more tool life over conventional drill/reamer combinations and generates pollution-free holes and side walls with perfect surface finishes. JC898 offers an advanced frontal teeth design ideal for helical interpolation which...
Read More »
New JC899 Finisher and JC898 Rougher Handle Lengths or Stack Heights Ranging from 15 to 60 mm
JC899 features a patented two-inone geometry that eliminates problems with delamination and fiber pulling out when working with stacked materials. Offers three to six times more tool life over conventional drill/reamer combinations and generates pollution-free holes and side walls with perfect surface finishes. JC898 offers an advanced frontal teeth design ideal for helical interpolation which...
Read More »
New DEFINER KM Series Rotary Knife Mills Achieve Uniform Particle Size Distribution
Offers high shear knives that quickly and efficiently cut solids to the desired output size without overgrind or excessive fines. Handle capacity ranges from 125 lbs. per hour (56 kg/hr) to 5000 lbs. per hour (2272 kg/hr) depending on the application. Delivers consistent particle output while maintaining product integrity.
Read More »
New DEFINER KM Series Rotary Knife Mills Achieve Uniform Particle Size Distribution
Offers high shear knives that quickly and efficiently cut solids to the desired output size without overgrind or excessive fines. Handle capacity ranges from 125 lbs. per hour (56 kg/hr) to 5000 lbs. per hour (2272 kg/hr) depending on the application. Delivers consistent particle output while maintaining product integrity.
Read More »
New MC232 Solid Carbide Milling Cutter from Walter Comes with Corner Radius
Offers reduced neck in turn makes the milling cutter more flexible and can be used in variety of cutting depths. Available with diameter sizes ranging from 1/8 in. to 3/4 in. and 2-20 mm. metric. Application include steel, stainless and cast iron.
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
