New Materials Products

Hydraulic Fluid optimizes older equipment.

QuintolubricÃ-® 855 is based on a natural ester, genetically engineered rapeseed oil. High viscosity index makes it appropriate for replacement of both ISO 46 and ISO 68 grade fluids. QuintolubricÃ-® 855 is fire resistant and biodegradable. It offers lubrication level of premium anti-wear hydraulic oil, and is compatible with hydraulic components from major manufacturers.

Interlocking Tile System requires no adhesive.

Requiring no subfloor preparation, 18 x 18 in. FreeStyle(TM) laminate tile installs directly over subfloors and existing flooring. Made with 95% recycled plastics, product incorporates interlocking edge and flexible, resilient, waterproof base. Formulated for high-use areas, it installs at rates of up to 400 ftÃ-²/man-hour and remains in place under heavy foot traffic and point loads of up to...

Compact Crystals suit handheld communications applications.

Shock- and vibration-resistant MJ series surface-mount crystals, housed in 5 x 3.2 x 1 mm package, are offered in frequencies from 16-90 MHz. Frequencies from 16-40 MHz are AT fundamental with maximum ESR (equivalent series resistance) of 50 ohms, while 40-90 MHz parts are AT third overtone with maximum ESR of 60 ohms. Typical shunt capacitance ranges from 2-4 pF, load capacitance varies from...

Interface Card provides high-speed link.

SST(TM) Reliance AutoMax card allows users to connect PCI bus computer to Reliance AutoMax DCS-NET or Remote I/O network. High-speed link avoids bottleneck of RS232 serial connections. Applications include system programming functions, statistical process control, process monitoring, operator interface and HMI, diagnostics, and system start-up and commissioning.

Glass vs. Plastic: Benefits of Using Glass Components in Biotechnology, Medical Device, Point-of-Care & Pharmaceutical Industries

This white paper from Accu-Glass outlines the various properties that make glass such an attractive option for a diverse range of medical-related applications.

Adhesive Film suits automotive assembly applications.

UnifilmÃ-® U650A acrylic-adhesive transfer film adheres to foams, plastics, metals, and fabrics. It can be laminated to variety of substrates, including foam materials for gasketing and NVH applications. Film is suitable for applying nameplates and decorative parts, bonding interior trim and instrument-panel components, and assembling leather-covered seats and steering wheels.

Patching Compound protects concrete floors.

Ultra Quartz(TM) 100% solids, silica-filled epoxy putty offers resistance to chemicals and abrasion. Trowelable to smooth, nonporous finish, it attains compression strength of 9,000 psi. Compound can be built up to 1 in. thick on damaged or pitted concrete floors. Because Ultra Quartz will not sag, drip, or run, it can be used to repair vertical and overhead surfaces. With pot life of 60 min, it...

Polyurethane Material produces polypropylene-like parts.

High-impact, rapid-setting RenPIM(TM) 6490 has gel time of 70-80 sec and demold time of 30-40 min. Shore 78D product has mix ratio of 2:1 by volume and flexural modulus of 166,000 psi after cure. Additional characteristics include heat deflection temperature of 154Ã-

Part Caster and Materials produce nylon prototypes.

Fitted with nylon program module, MCP/04 vacuum casting machine manufactures nylon prototypes and parts in 6 min. Nylons PA 700 and PA 1000 are PA-6-grade plastics that exhibit flexural modulus of 108,750-137,750 psi, tensile strength of 4,640-6,090 psi, and heat deflection temperature of 169 to 269Ã-

Polyurethanes are suited for prototypes and short-run parts.

RenCast(TM) Fast hand-cast polyurethanes, formulated without mercury, include 2 Shore D polyurethanes and 2 Shore A systems. All products can be hand-poured and are demoldable in under 4 hr. Products include RenCast 6492 Fast off-white, Shore 85D, flame-retardant material; RenCast 6493 Fast off-white, Shore 90A hardness material; RenCast 6494 Fast amber-colored, Shore 45A rubber-like material;...

Materials and Adhesives create durable, functional prototypes.

RenShape(TM) SL 7565 material builds clear, ABS-like parts with flexural modulus of 300,000 psi and elongation of greater than 20%. RenShape SL 5260 photopolymer produces opaque, white prototypes and parts with ABS thermoplastic-like surface, flexural modulus of 350,000 psi, and elongation of 12%. Adhesives, for filling and bonding stereolithography models and prototypes, include RenShape SL Bond...

5 and 13 Micron Resolve Columns with Greater Bed Stability

Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.