Littelfuse New Industrial Relays, High-Speed Fuses Selected as Finalists for 2017 Product of the Year
Electrical Equipment & Systems

Littelfuse New Industrial Relays, High-Speed Fuses Selected as Finalists for 2017 Product of the Year

Third consecutive year Littelfuse products have been recognized by Plant Engineering magazine CHICAGO, December 4, 2017 - Littelfuse, Inc., the global leader in circuit protection, today announced that three new lines of Littelfuse products have been selected as finalists in the Electrical Safety category of Plant Engineering magazine’s 2017 Product of the Year program. Marking the third...

Read More »
FLT Series Switch is equipped with thermal dispersion mass flow sensor.
Electrical Equipment & Systems

FLT Series Switch is equipped with thermal dispersion mass flow sensor.

Available in FLT93S and FLT93F versions, FLT Series Switch can be operated in setpoint range in water from 0.01 to 0.5 FPS. Unit offers level/interface accuracy of ±0.25 in. and measurement repeatability of ±0.125 in. Product is operated in a temperature range of -40 to 350 °F and is suitable for wet/dry detection, high/low level alarm and control, foam and sediment interface control and...

Read More »
Product Announcement from STEGO, Inc.
HVAC

Product Announcement from STEGO, Inc.

Certain industries require all our know-how. The protection of electrical and electronic components in atmospheres with gases, dusts and splash water call for the highest demands, especially in areas exposed to explosion hazards, as well as areas with dust and splash protection requirements. STEGO offers solutions for these conditions: The convection heater CREx 020 and the compact thermostat REx...

Read More »
YORK
Thermal & Heating Equipment

YORK

Furnaces redefine home comfort with worry-free reliability, value-added features and enhanced convenience MILWAUKEE (Nov. 30, 2017) – YORK® Affinity™ Series 97.5 percent and above AFUE gas furnaces from Johnson Controls have been recognized as ENERGY STAR® Most Efficient 2017, when combined with touch-screen Communicating Control thermostats. The ENERGY STAR Most Efficient 2017 designation...

Read More »
Managing the New FGD Wastewater Regulations
Sponsored

Managing the New FGD Wastewater Regulations

EPA Steam Electric Power Generating Effluent Limitations Guidelines, or ELG’s, impact coal-fired power plant operations and their wastewater management. Specifically, the ELG’s impose limits for suspended solids, arsenic, mercury, selenium, and nitrate/nitrite for Flue Gas Desulfurization (FGD) wastewater. These regulations drive the need for technology based solutions that address and adapt to variables such as the nature of wastewater streams, types of contaminants, contaminant loading, and costs. In this guide you will learn about the best available technologies for complying with the new standards. One of the leading contenders in this process is the Fluidized Bed Reactor or FBR, which removes soluble selenium and other metals from FGD wastewater. Advantages of fluidized bed reactors include optimum microorganism efficiency, smaller overall footprint, steady-state operation, lower hydraulic residence times, system robustness, and lower costs. Download this guide for additional information on FBR technology for treating FGD wastewater, including pilot studies and tests, and polishing selenium removal options.

Read More »
DGQ2788A Dual DPDT / Quad SPDT Analog Switch is RoHS-compliant.
Electrical Equipment & Systems

DGQ2788A Dual DPDT / Quad SPDT Analog Switch is RoHS-compliant.

DGQ2788A Dual DPDT / Quad SPDT Analog Switch offers low resistance of 0.37 Ω at 2.7 V and 338 MHz bandwidth. Unit comes in 2.6 mm × 1.8 mm × 0.55 mm miniQFN16 package and is operated in a temperature range of -40 °C to +125 °C. Product features four independently selectable SPDT switches and two control inputs. DGQ2788A is operated using single 1.8 V to 5.5 V power supply and offers latch up...

Read More »
Wisconsin Oven Ships Class Curing Batch Oven to Automotive Industry
Thermal & Heating Equipment

Wisconsin Oven Ships Class Curing Batch Oven to Automotive Industry

East Troy, WI - November 17, 2017- Wisconsin Oven Corporation shipped a natural gas direct fired batch oven with a separate cooling chamber to a manufacturer of automotive parts. The industrial oven will be used to cure rubber automotive hoses. The work chamber of the oven is 5’0 W x 10’0” L x 7’0” H and has a maximum temperature rating of 500°F. This curing oven has sufficient...

Read More »
Thermal Product Solutions Ships Blue M Mechanical Convection Oven to a Manufacturer of Consumer Products
Thermal & Heating Equipment

Thermal Product Solutions Ships Blue M Mechanical Convection Oven to a Manufacturer of Consumer Products

November 8, 2017 - Thermal Product Solutions (TPS), a global manufacturer of thermal-processing equipment, announced the shipment of a Blue M Mechanical Convection Oven to a manufacturer of consumer products. This DC-256 model Blue M oven includes a NIST Certificate of Calibration at 300°F. The temperature range of this Blue M convection oven is 100°F to 600°F and has work chamber dimensions...

Read More »
Lindberg/MPH Ships a 1200
Thermal & Heating Equipment

Lindberg/MPH Ships a 1200

November 9, 2017 – Lindberg/MPH announced the shipment of a 1200°C single zone tube furnace to a manufacturer of electronic components. The 1200°C tube furnace offers exceptional radial and linear temperature uniformity, process repeatability, rapid heat-up and response, and requires minimal maintenance. It is ideal for annealing, ashing, carbon firing, ceramic firing, hardening, sintering,...

Read More »
Robotic Water-Cooled MIG Guns come with gas lines.
Explosives, Armaments, and Weaponry

Robotic Water-Cooled MIG Guns come with gas lines.

Robotic Water-Cooled MIG Guns are available in CWD and TWD versions which are used for conventional robots and through-arm robots respectively. Units come in amperages ranging from 350 to 600 amps and are equipped with gas diffuser. Products use dual-circuit cooling system and are offered in clutch and solid mount models. MIG guns come with mounting arms, neck options and integrated air blast.

Read More »
Aqua Dam Water Filled Flood Barrier
Sponsored

Aqua Dam Water Filled Flood Barrier

Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.

Read More »

All Topics