Heat Exchangers keep uninsulated enclosures cool.
Exchangers

Heat Exchangers keep uninsulated enclosures cool.

ProAir heat exchangers can significantly reduce heat rise in sealed, uninsulated enclosures and extend life of enclosed electronics. Model XR20 will limit heat rise to 24°F above ambient and XR29 will keep temperature within 15°F above ambient. Both are available in 115 or 230 V and 50/60 Hz configurations and can be mounted to any internal or external surface of enclosure. Heat...

Read More »
Cabinet Heaters mount anywhere.
Heaters

Cabinet Heaters mount anywhere.

Ranging from 2-24 kW, CUI Series heaters may be mounted on floor, wall or ceiling, or recessed into wall or ceiling. Standard voltages include 208, 240, 277 and 480, with other voltages available. Lengths range from 28-80 in., depending on kW and voltage. Extruded aluminum grille discourages tampering with finned, tubular heating element. Controls include built-in automatic reset thermal cutout...

Read More »
Oven offers atmosphere-controlled tool storage.
Ovens

Oven offers atmosphere-controlled tool storage.

Tool Conditioning Oven is designed to keep semiconductor parts and tooling clean, dry, and ready for installation. It is configured to hold either 200 or 300 mm tools. Horizontal airflow keeps temperature uniform up to 95°C. HEPA filter delivers better than Class 100 conditions, and nitrogen atmosphere provides dry environment. Teflon® padding, standard on 300mm units, eliminates...

Read More »
Seagoing Bus works in marine applications.
Switches

Seagoing Bus works in marine applications.

Electronic Databus System provides switch panels for multiple locations onboard boats. It uses rocker switches and digital serial bus to operate heavy electrical equipment such as blowers, winches, pumps or lighting. Weatherproof switch is configurable for SPST, DPST, SPDT, DPDT, momentary or continuous switching. It complies with existing and proposed marine electrical/electronic systems such as...

Read More »
Fluid Bed Drying System recycles exhaust air.
Dryers

Fluid Bed Drying System recycles exhaust air.

Drying system recycles 75% of heated exhaust air through continuous pulse jet dust collector and reheats it in natural gas burner, during drying of rice, salt, limestone, sawdust, polymers, inorganic chemicals and other products that require temperatures of 150+ Â-ºF. System permits process to operate at high outlet moisture while staying comfortably above dew point of final exhaust air.

Read More »
Burners are available in 2 design platforms.
Burners

Burners are available in 2 design platforms.

R Series Burners come in 64 different configurations to fit variety of applications. Firing ranges/capacities include dual fuel from 177,000 to 4,760,000 Btu/hr; gas from 177,000 to 7,813,000 Btu/hr; natural gas low NoX from 307,000 to 6,388,000 Btu/hr; and light-oil from 2.4 to 65.6 USgph. On-off, 2-stage, and modulating configurations are available. All allow choice of 3rd party controls....

Read More »
Heat Exchangers cool compressed air.
Dryers

Heat Exchangers cool compressed air.

Models SR-125 to SR-3000 cool compressed air by mechanical refrigeration, removing moisture and assuring that none condenses downstream unless air is exposed to lower temperatures. They have integral demister moisture separator and two-pass air system. Compressed air is pre-cooled in aluminum-finned, cross-flow heat exchanger to reduce refrigeration load, resulting in more efficient refrigeration...

Read More »
Potentiometer Switch withstands adverse conditions.
Switches

Potentiometer Switch withstands adverse conditions.

Environmentally sealed with transfer-molded epoxy resin and O ring shaft seal, PA 400 potentiometer switch is resistant to elevated temperatures, corrosion, moisture, water and bodily fluids. Its rotation life lasts 25,000 cycles. From basic configuration of 0.394 in. cube with gold contacts, unit is available with bushings, cases, and flat or rounded shafts in varying lengths. It is designed...

Read More »
Potentiometer Switch is set via rotary and digital inputs.
Switches

Potentiometer Switch is set via rotary and digital inputs.

Hall-effect SW44109 has integrated circuit, momentary pushbutton switch and 295 deg linear taper potentiometer, so user can specify value via digital switch or rotary motion. Switch weighs less than 1 oz, measures less than 1 sq in., and requires only 2 in. of space behind display panel. Typical applications include industrial/avionics displays and audio controls, instrument panel controls, and...

Read More »
Fuel Gas Heaters warm up natural gas.
Heaters

Fuel Gas Heaters warm up natural gas.

Skid-mounted heaters preheat natural gas to keep it above dewpoint before combustion. They are prewired for ease of installation and are available for Class 1, Div 1 or 2 locations. Heaters have low watt density for long life, digital temperature control using silicon controlled rectifiers to maintain tight temperature, and are well insulated for low heat loss. They produce no emissions and are...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics