Electric Box Furnace For Heat Treating Industrial Valve Parts And Various Tool Steels
Furnaces

Electric Box Furnace For Heat Treating Industrial Valve Parts And Various Tool Steels

L&L Special Furnace Co., Inc., has supplied an electric box furnace to a plant located in Louisiana that is a global supplier of large industrial valves for various industries. This is the fifth  L&L furnace supplied to this facility. The furnace is used to both heat treat and temper various rings and seals deployed in the manufacturing of valves used in the power-generation field. It is also...

Read More »
Littelfuse, Inc. Introduces the 40mA Pico 242 Series Hazardous Area Barrier Network Fuse with Enhanced Safety Features
Fuses

Littelfuse, Inc. Introduces the 40mA Pico 242 Series Hazardous Area Barrier Network Fuse with Enhanced Safety Features

Littelfuse, Inc.’s new 40mA Pico 242 Series Hazardous Area Barrier Network Fuse is designed for enhanced safety in electronic equipment in potentially explosive environments. It prevents from overheating or spark production that could ignite fires or explosions by minimizing overcurrent/short-circuit event risks. The PICO 242 Series Fuse meets intrinsic safety standards for hazardous locations...

Read More »
Air Products to Supply Largest Glass and Construction Material Manufacturer in South Korea
Burners

Air Products to Supply Largest Glass and Construction Material Manufacturer in South Korea

Integrated Solution Encompasses Long-term Oxygen Supply and Oxy-fuel Combustion Equipment LEHIGH VALLEY, Pa., Sept. 17, 2018 /PRNewswire/ -- Air Products (NYSE: APD) today announced it has been awarded oxygen and oxy-fuel combustion equipment supply by KCC Corporation, the largest glass and construction material manufacturer in South Korea, for the new glass fiber production line at its...

Read More »
Textile Manufacturer Places Order for Eight Despatch TAD3-10 Walk-in Ovens for Preheating Tools
Ovens

Textile Manufacturer Places Order for Eight Despatch TAD3-10 Walk-in Ovens for Preheating Tools

Minneapolis, Minnesota, USA, September 13, 2018 – A major textile manufacturer placed a $446,000 order for eight Despatch TAD3-10 walk-in ovens. The sale was made by Despatch representative FLW Southeast. These ovens will be used to preheat spinnerets, so polymers will not stick as they are extruded through the tool. The heavy metal spinnerets weigh about 40 pounds and are heated to 600°F...

Read More »
SWEP 2-Stage Units Chosen for Wembley Park Development
Plate Heat Exchangers

SWEP 2-Stage Units Chosen for Wembley Park Development

DOWNERS GROVE, Ill., Sept. 14, 2018 /PRNewswire/ -- SWEP, part of Dover (NYSE: DOV), is proud to announce that Ramboll, the consulting engineers for Quintain's prestigious Wembley Park development, have specified SWEP 2-stage brazed plate heat exchanger (BPHE) units to drive the single heat network that will serve the entire site. The Wembley Park development includes residential,...

Read More »
Wisconsin Oven Ships Batch Oven to Leader in the Engineering Industry
Ovens

Wisconsin Oven Ships Batch Oven to Leader in the Engineering Industry

East Troy, WI – August 31, 2018, Wisconsin Oven Corporation is pleased to announce the shipment of an electrically heated enhanced duty walk-in oven to a leader in the technology industry. The batch oven will be used for composite curing small parts and has the capability to heat 16,000 pounds of a composite material from 70° F to 350° F within a 6-7 hours. This composite curing oven has...

Read More »
UltraFlex Induction Heater Used to Harden a Steel Gun Barrel
Heaters

UltraFlex Induction Heater Used to Harden a Steel Gun Barrel

[Sept 11th, 2018] New tests performed by UltraFlex Power Technologies revealed the results achieved when an induction heater was used for hardening of a 4140 steel gun barrel. The ultimate goal of the tests was to heat a small block section of a gun barrel to 1500◦F (815◦C) and quench it in oil, identifying the best possible induction coil and equipment settings for the process. An advanced...

Read More »
New MHP-TAC Protection Devices Feature Thermal Cut-Off Temperatures of Less Than 90 Degree Celsius
Thermal Fuses

New MHP-TAC Protection Devices Feature Thermal Cut-Off Temperatures of Less Than 90 Degree Celsius

The MHP–TAC Resettable Over-Temperature Protection Devices are suitable for LiP and prismatic battery cells used in notebook PCs, ultra-books, tablets, smart phones and e-cigarettes. The units are offered in 4.75 mm x 2.80 mm x 0.80 mm dimensions. They protect high-capacity lithium-ion polymer and prismatic battery cells when connected with PPTC device in parallel with bimetal protector.

Read More »
Latest SpinnerXP Modular Plant Growth Chamber Comes in Patented Dual-Air Zone Design
Environmental Chambers

Latest SpinnerXP Modular Plant Growth Chamber Comes in Patented Dual-Air Zone Design

The SpinnerXP™ Modular Plant Growth Chamber is designed for hobbyist, cultivator or patient-caregiver-caregiver to grow cannabis indoors. The unit consists of twelve plant chambers that are set at an equal distance from a central light source and a cool tube for supporting high-wattage HPS lighting systems. It is operated on a 220 V or 110 V electricity. The chamber eliminates the need for...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics