Tactile Switches are illuminated.
Switches

Tactile Switches are illuminated.

JF Series full-face, LED illuminated, thin tactile switches are suitable for applications that require operator interface, such as front panels and custom keyboards. LEDs are available in red, green or yellow, and actuator color matches to further enhance illumination. Switches measure 7.3mm from PCB to top of switch, and total surface area covers 0.697 X 1.059 in. Single pole, single throw...

Read More »
SPDT Relay fits in small places.
Switches

SPDT Relay fits in small places.

Slim PCH series relay minimizes need for board space. It has silver-tin oxide contacts in form C (SPDT-NO) arrangement. Normally open contacts are rated at 5A resistive at 277 Vac or 30 Vdc, while normally closed contact set is rated for 3 A. DC coils are available for 5-48 V and nominal coil power requirement is 400mW. Relays are UL recognized, CSA certified and VDE approved. Applications...

Read More »
Heat Guns

Heat Gun and Soldering Iron Kit is battery-powered.

MCH-100 portable, heat gun and soldering iron kit offers 48 V rechargeable battery pack housed in carrying case with 9 ft cable for connecting each tool. Hot air gun reaches 1,350°F for installing heat shrinkable tubing, boots, and solder sleeves, and 50 W soldering iron can perform various repairs. Heat Gun features interchangeable heating elements from 200 to 400 Watts, built-in motor...

Read More »
Turning and Milling Inserts are PVD coated.
Inserts

Turning and Milling Inserts are PVD coated.

SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.

Read More »
Sterilization Oven minimizes floor space requirements.
Ovens

Sterilization Oven minimizes floor space requirements.

SD Sterilization and Depyrogenation Oven is 50 in. wide and 96 in. high, with chamber capacity of 30 cu ft. It is available in 3 configurations: ultra performance, with cycle time of 1 1/2 hr; high performance, with 2 1/2 hr cycle time; and standard performance, with cycle time of 6 hr. Recirculation filter system prevents mechanical stress on HEPA filter. Control system minimizes filter supply...

Read More »
Heaters mount vertically, horizontally, or on angle.
Heaters

Heaters mount vertically, horizontally, or on angle.

Doorjet Heaters resist wet, corrosive environments found at loading docks and platforms of industrial plants and warehouses. They offer stainless steel parts including casing with reinforcing angle rings; prewired, sealed, control box; and burner baffle. Able to heat door openings up to 12 x 12 ft, models are available with input ratings from 550,000 to 950,000 BTUH. Heaters operate on natural...

Read More »
Cartridge Heaters are available with abrasion protection.
Heaters

Cartridge Heaters are available with abrasion protection.

Watt-Flex(R) cartridge heaters have split-sheath construction, which allows each half of heater to expand independently when energized, maximizing metal-to-metal contact with surrounding bore. Continuous-coil design eliminates cold spots between sections, producing uniform temperature profile. Heaters are available in standard dia of 1/4 to 1 in., as well as 8 to 20 mm; in lengths from 1 1/4 to...

Read More »
Reverse Expansion Insert presses into plastic hole.
Inserts

Reverse Expansion Insert presses into plastic hole.

Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by...

Read More »
Switches

Transport Switch works with optical networking systems.

Model 6350 Synchronous Digital Hierarchy (SDH) scalable transport switch helps network operators build metro optical networks and manage their backbone traffic in metro and regional networks. 6350 flexible and adaptive multi-service platform delivers voice services from 2 Mbps and higher, leased line services, and Ethernet. One rack of equipment can handle more than 1,000,000 simultaneous phone...

Read More »
Cooling System suits dry grinding applications.

Cooling System suits dry grinding applications.

Kool-Grind System includes chiller with 4x4 in. plate and 6x12 in. electromagnetic chuck. Chiller runs coolant through plate and chuck to cool work-piece during grinding, prevent heat build-up and warping, reduce grinding wheel breakdown, and allow closer tolerances. It avoids use of flood coolants or mist sprays. Applications include thin parts, mold inserts and die sections.

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics