Single/Dual-Gate Logic Devices provide ring-free switching.
Switches

Single/Dual-Gate Logic Devices provide ring-free switching.

Ultra Low Power TinyLogic(TM) products operate over 0.9-3.3 V Vcc range. Suited for low-voltage, battery-powered, portable applications, NC7SP models offer propagation delays of 6 ns at 1.8 V and 3 ns at 3.3 V. NC7SV models offer 1.9 ns propagation delays at 1.8 V, and 1 ns at 3.3 V. All models provide Over Voltage Tolerant (OVT) inputs and outputs that interface with devices operating up to 3.6...

Read More »
Gas Furnace provides quiet operation.
Furnaces

Gas Furnace provides quiet operation.

Horizontal 80 is an 80% AFUE furnace that offers heating range of 50,000-125,000 Btuh and supports cooling capacity of 1½ tons. Crimp-Tite(TM) heat exchanger has crimped mechanical seams, which eliminate stresses developed with arc or seam welding and protects aluminized coating. Furnace includes heavy gauge cabinet for corrosion protection, Honeywell® slow-opening gas valve, integrated...

Read More »
PTFE Insulated Heaters suit caustic or corrosive environments.
Heaters

PTFE Insulated Heaters suit caustic or corrosive environments.

Thermofoil(TM) heaters are 0.025 in. thin and resistant to most acids and bases. Sealed PTFE insulated leadwires allow immersion in chemicals such as acid baths, etching systems, and chemical processing tanks. Suitable for operation to 260°C and capable of power densities to 50 W/in.Â-² at 100°C, heaters provide fast gentle warming of critical materials.

Read More »
Burner fires into 10 in. diameter immersion tubes.
Burners

Burner fires into 10 in. diameter immersion tubes.

Model IP010 ImmersoPak burner has 3 MBtu/hr input. Nozzle-mixing burner comes complete with packaged combustion air blower. Unit is multi-fuel capable and operates with control method of modulating air. It is suitable for heating immersion tubes on cleaning tanks, spray washers, salt baths, quenching tanks, tempering tanks, asphalt tanks, and similar equipment.

Read More »
Aluminum Silica Insulation exhibits uniform hardness and density.
Insulation

Aluminum Silica Insulation exhibits uniform hardness and density.

TYPE Z-500 is made of 60% SiO2 and 40% Al2O3 with nominal bulk density of 50 pcf and average surface hardness of 93 on A scale. It exhibits 0.65% shrinkage after 25 hr at 800°C. Product is prefired and does not outgas upon heating. It is completely free of organics and is fully compatible with silica, alumina, and boron nitride coatings. Material is used in transport and continuous casting...

Read More »
Truck Ovens have easy to see pilot lights.
Ovens

Truck Ovens have easy to see pilot lights.

Gas and electric ovens are offered with cart guide tracks and heating chambers of 47.5, 80, 125, and 180 ftÂ-³. Maximum temperatures reach 500 or 800°F, depending on model. All models have digital, microprocessor-based indicating set-point controller; aluminized steel interior; and fan forced horizontal air circulation. Ovens also include 2½ in. insulated floor, pressure...

Read More »
Burner System meets NFPA requirements.
Burners

Burner System meets NFPA requirements.

HeatPak, with integrated valve train and control box, includes double valve with gas pressure switches, Veri-Flame® modulating flame monitor, and ignition transformer. It can be used on burners with Â-½ to 2 in. piping up to 6 MMBtu/hr inputs. It is available with 2 options: one with choice of scanner or flame rod, and another proof of position using either switches on burner or...

Read More »
Heating Elements are designed for various furnace atmospheres.
Heating Elements

Heating Elements are designed for various furnace atmospheres.

Designed for use at very high temperatures, Super elements work directly in furnace atmosphere without protective muffles. Five grades are available. Elements are suitable for nitrogen, hydrogen, vacuum, and mixtures of endogas, and reducing furnace atmospheres. Ready-made elements can be used in production and laboratory furnaces in glass, steel, electronics, ceramics, and heat treatment...

Read More »
Heat Exchanger cools electrical control cabinets.
Exchangers

Heat Exchanger cools electrical control cabinets.

Model WW4000S water-to-air heat exchanger, housed in 19.69 x 31.50 x 7.09 in. enclosure, is suited for operation in extremely polluted and high temperature environments. Its design employs internal thermostat and 2 fans that produce 648 cfm air flow. Cooling water flow of 3.5 gpm at 50°F produces 5000 W of cooling capacity when temperature difference between water inlet and ambient is...

Read More »
Continuous Dryer produces particles of uniform size.
Rotary Dryers

Continuous Dryer produces particles of uniform size.

Micron Dryer combines milling, drying, and classifying in high-capacity unit to produce free-flowing powders with uniform moisture content. It also performs solvent retrieval and internal backmixing. Capacities range from 100 to over 4500 lb/hr. Body consists of vertical cylinder with grinding rotor, hot air inlet, and classifier. Applications include pigments, magnesium hydroxide, magnesium...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics