New Thermal & Heating Equipment Products

Curing Powder Coatings on Gaskets

Saving Energy and Space With a Heraeus Infrared System By installing an infrared oven Klinger UK Ltd has been able to achieve significant savings in energy costs in the curing of powder coatings on a range of sealing gaskets at its Bradford manufacturing plant. In addition, the infrared system occupies less than half the space required by the previous gas-fired convection oven and has also...

Infrared Provides Bumper Results @ Honda

Increasing Efficiency of Bumper Spray Painting An infrared oven, fitted with fast response, medium wave heaters, from Heraeus Noblelight is helping to increase the efficiency of the spray painting of vehicle bumpers at Honda of the UK Manufacturing Ltd. Bumpers are painted with three coats. First a prime coat is applied, which is flashed off in a warm air oven before being cooled. A base coat,...

Infrared Heat and Brake Pads

Heraeus Aids in the Powder Coating of Brake Pads By installing an infrared oven from Heraeus Noblelight, Federal Mogul has eliminated a previous bottleneck and quadrupled the productivity of curing a powder coating of a range of brake pads. Federal Mogul supplies brake pads, shoes and linings. An important stage in the production of brake pads is the application of an anti-corrosion coating,...

Efficiency Leap With IR Drying - Drying of Water-Based Coatings

Drying of Water-Based Coatings New research on the application of IR dryers to water-based varnishes indicates high energy cost savings. With correct selection of the radiation source the infrared energy requirement for the drying process can be reduced by up to 50%. Water based varnishes are well known in various printing processes and their usage is growing. The printing industry uses these...

Design Guide: Heat Sinks for High-Power Applications

Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.

Horizontal Heat Treating System suits aerospace industry.

Designed to solution-treat aluminum, natural gas fired batch oven with non-heated manual quench tank accepts 4 x 4 x 4 ft basket and is rated for 1,250Ã-

OK International to Show MD&M / Electronics West Visitors How to Drive Productivity in Diverse Applications

OK International is preparing to take a wide range of innovative soldering and production assembly technologies to this year's MD&M West Show being held in Anaheim, CA over 10th - 12th February. Each system is designed to reduce training investment, perform a diverse array of applications and measurably increase productivity. OK International products on display at Booth 432 will include advanced...

Oscar Mayer Teams Up with Heraeus Noblelight - Ready Meals are Pre-Browned

Oscar Mayer manufactures a range of potato-topped and crumb-topped ready meals for major supermarkets and it is important, in terms of final presentation, that the products are pre-browned. By installing an oven using carbon infrared heaters Oscar Mayer has been able to eliminate previous maintenance problems, improve energy efficiency and liberate valuable floor space, at its food manufacturing...

Drying Water-Repellent Coating - Infrared Heating on the Manufacture of Outdoor Clothing

A carbon infrared system is helping to increase production line speeds by providing pre-drying of a water repellent coating applied to a specialized fabric used in the manufacture of outdoor clothing. Moreover, its ease of control is also ensuring that there is no damage to the fabric caused by over-heating. The best outdoor clothing provides double protection to rain, as a water repellent...

Browning Convenience Meals - Infrared Heating of Oven-Ready Meals

A specially-built oven system, incorporating the latest carbon infrared technology, is helping Geest to achieve perfect browning of the toppings for a range of oven-ready meals produced at its Milton Keynes, England food factory. When Geest decided to install a new production line to produce a new range of products at Milton Keynes, it was agreed that this would be designed to include the most...

Activating Adhesives on Decorative Trims - Using Infrared Heating in Car Manufacture

An infrared system from Heraeus Noblelight is helping R-Tek Ltd to achieve perfect adhesion of decorative trims on the inside of motor vehicle door panels. The plastic decorative trims are normally fixed to the panels on a production line by spraying the inside of the panel with an adhesive and then applying the trim. However, when R-Tek started to experience problems with the adhesion, it was...

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.