Extremely Soft TIM Delivers Low Thermal Resistance
Fillers

Extremely Soft TIM Delivers Low Thermal Resistance

Carteret, NJ - Wednesday, July 19, 2017 - Sarcon® PG25A is one of Fujipoly's softest and best performing thermal gap filler pads for applications that have delicate components and high compression rates. When it is sandwiched between components of varying shapes and sizes and a nearby heat sink or spreader, this compliant 2.5 W/m°K material exhibits a thermal resistance as low as...

Read More »
Breathable Air from your Existing Air Compressor
Respirators and Masks

Breathable Air from your Existing Air Compressor

Compliance with the OSHA requirement for Grade "D" Breathable Air can be accomplished with the use of a Quality Air Breathing System manufactured by Martech Services Company. According to Tom Wright, Director of Sales and Marketing, when placed near the point of use, a Quality Air Breathing System will work with the existing compressed air supply. The four stage filtration, filters the air, and...

Read More »
Barriers

Gibraltar's New Anti-Ram Barriers Receive USACE DOD Barrier List Acceptance

Eight New Products Listed on June 2017 DOD Anti-Ram Barrier List Release MARBLE FALLS, Texas, July 12, 2017 - Gibraltar, a leading manufacturer of anti-ram vehicle barriers used across the globe has announced that it has received approval of eight new anti-ram barrier systems by the USACE Protective Design Center. These new barriers are listed on the June 2017 release of the Department of Defense...

Read More »
GN 2184 Edge Protection Profiles provide hardness of 70±5 Shore A.
Protectors

GN 2184 Edge Protection Profiles provide hardness of 70±5 Shore A.

Installed on the front edge of metal sheets and plates for protecting surfaces from damage, GN 2184 Edge Protection Profiles are temperature resistant from -40 to 90°C. Made from black polyvinyl chloride with textured finish, units are available in standard black, white and grey colors. Minimizing treatment like deburring and chamfering of cut or laser-cut metal sheets, profiles are embedded...

Read More »
NRFit™ Connectors and Caps meet ISO 80369-6 standard.
Caps

NRFit™ Connectors and Caps meet ISO 80369-6 standard.

Designed for neuraxial applications such as spinal and epidural procedures, NRFit™ Connectors and Caps are BPA and latex-free medical-grade acrylic resin. Connectors are available to fit 0.083 in. or 0.122 in. outer diameter tubing whereas caps come with vented and non-vented designs. Suitable for small-bore connecting applications, connectors feature ergonomic wings on the female connectors...

Read More »
ROLEC technoPLUS Enclosures Now Rated IP 69K For Jet Wash Protection
Enclosures

ROLEC technoPLUS Enclosures Now Rated IP 69K For Jet Wash Protection

ROLEC technoPLUS enclosures are now available with optional IP 69K protection – safeguarding electronics from high pressure and high temperature jet washing. They are designed for challenging indoor and outdoor locations. Each case features a dedicated bracket for horizontal or vertical mounting on poles and masts. ROLEC technoPLUS enclosures are rated to IP 66 as standard (IP 67 and IP 69K...

Read More »
Rockford Systems Goes Beyond OSHA/ANSI Requirements with Interlocked Safety Shield Line for Cutting & Turning Machines
Miscellaneous Protectors

Rockford Systems Goes Beyond OSHA/ANSI Requirements with Interlocked Safety Shield Line for Cutting & Turning Machines

ROCKFORD, IL, JULY 5, 2017 - Drill presses, lathes, grinders and milling machinery are essential metalworking tools, but like all machines, they can be dangerous without adequate safeguarding. Hundreds of injuries occur annually from the improper maintenance and use of these machines, such as amputations, burns and lacerations, according to the Occupational Health & Safety Administration (OSHA)....

Read More »
Pressure Plate is made of polyamide material.
Plates

Pressure Plate is made of polyamide material.

Designed for 2-inch-wide systems, Low-Conductivity Pressure Plate is suitable for curtain wall systems. Offering durability and water-tightness, unit is available for additional 2.5-inch-wide systems. Product’s material offers effective thermal barrier.

Read More »
Thread Chaser Holders feature chipbreaker geometry.
Holders

Thread Chaser Holders feature chipbreaker geometry.

Featuring carbide-pin locating systems, patented pocket seat surface patterns and high-pressure coolant delivery, Thread Chaser Holders offer insert positioning, superior rigidity and quicker chip evacuation. Compatible for tooling with Capto C6, Capto C8 or Steadyline GL50 connections, unit maintains tight insert grip during threading process. Suitable for external and internal threading...

Read More »

All Topics