A Growing Number of State Dots Approve J-J Hooks Mash-Tested Restrained Precast Safety Barriers for Highway Use
A favorite among highway engineers and DOTS, J-J Hooks restrained barriers are now being used on major roadway and bridge projects in more than 20 U.S. states MIDLAND, Va. – The MASH-tested J-J Hooks anchored barrier has now been approved by more than 20 state Departments of Transportation with additional approvals anticipated in the near future, according to Easi-Set Worldwide. AASHTO's...
Read More »Emedco Releases Thousands of New Products to Ring in 2013
BUFFALO, NY - Emedco has released thousands of new products designed to increase safety for customers in all industries. The company now offers antimicrobial signs, water-soluble labels, GHS training materials, red tag centers, and so much more. These new products are featured online and in the 2013 Buyer's Guide, which has over 850 pages of high-quality safety options, making it the company's...
Read More »Universal Safety Response to Attend 55th Annual ASIS International Seminar and Exhibits
Perimeter Security Solution Displays & Demos in Anaheim, CA September 21-23 FRANKLIN, Tenn., Sept. 15 - Universal Safety Response (USR), a Smith & Wesson Company (NASDAQ:SWHC) and a leader in perimeter security systems, will exhibit at one of the security industry's largest events, the ASIS International Seminar and Exhibits, held September 21-23 at the Anaheim Convention Center. From 9:00 a.m....
Read More »ADDGARD® Pedestrian Barricade System by Remcon Plastics Accepted by Federal Highway Administration
Reading, PA - December 18, 2007 - The Federal Highway Administration (FHWA) has accepted Remcon Plastic's ADDGARD Barricade System, calling it a crashworthy traffic control device for use in work zones on the National Highway System." "Now that laws which require barricades to meet the needs of blind pedestrians are starting to be enforced, we are excited to have ADDGARD receive federal...
Read More »
Injection Molding from 3D Printed Molds
Check out this white paper to see how 3D printing may be a beneficial alternative to traditional mold making processes.
Read More »
Barricade provides temporary traffic control.
The Mast(TM) is made of UV-stabilized prime polyethylene resin with molded-through hardware holes for added strength and to facilitate installation. Uprights meet all applicable MUTCD specifications. Warning light and 2 flags can be installed on each upright. The Mast(TM) will accept The Wave(TM) molded centerboards, extruded centerboards, and most other plastic centerboards available.
Read More »
Barriers provide temporary traffic control.
Comprised of UV-stabilized plastic components and recycled rubber, Navigator Barricades(TM) assist pedestrians and slow-moving vehicles through work zones. They meet any work zone condition that is potentially dangerous, even up to 90° angles. Units snap together so there are no assembly tools required. They are stackable and meet all criteria under Americans with Disabilities Act.
Read More »
Barricade Board offers temporary traffic control.
Made of UV-stabilized prime polyethylene with reinforced structure, THE WAVE(TM) comes in lengths of 4, 6, and 8 ft. It includes recessed through holes for use with flush-mounted hardware. Sealed board ends help keep out dirt and moisure. Barricade boards can be unsheeted or sheeted on one or both sides. Sheeting grade options include Engineer, High Intensity, or Diamond Grade. With NCHRP-350...
Read More »
Barricade helps ensure construction traffic safety.
MVP(TM) Vertical Panel Barricade features break-away design with panel sizes to 12 x 36 in. Temporary traffic control product can stack with warning light installed and includes nesting feature for minimization of storage space. Unit's 45 lb base has molded handles and profiled bottom for sure road grip. Made of impact-resistant polyethylene, recessed panel protects sheeting. Product is...
Read More »
Barricade System offers easy set up and take down.
Anchor(TM) Barricade System features sand fillable base that holds up to 45 lb per side, 90 lb per barricade, with flush fitting cap. Four-by-four plastic uprights ease into base for easy set up. Rubber nonskid pads provide stability. System is stackable, UV stabilized, and includes ergonomic handle for ease in hauling.
Read More »
Barricades ensure safe crowd management.
One-piece, molded-polypropylene MOVIT(TM) barricades are 6 ft 6 in. long, 3 ft 3 in. high, and weigh 26.5 lb. They are structurally designed to withstand loads exceeding 1,100 lbs. Units feature ANSI A10.18 certification for compression, drop, flexion, weather, and tension. They can be set up quickly and linked together without tools or additional hardware. Colors include silver, red, orange,...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
