IMAC Vent Guards are used for protecting vent terminations.
Guards

IMAC Vent Guards are used for protecting vent terminations.

Vent Guards are available in sizes ranging from 1/8 in. to 1 in. and are made of high strength aluminum and stainless steel. Units enable user to keep unwanted contaminants such as debris and insects and are integrated with stainless-steel mesh screen. Products offer corrosion, dry rot or UV degradation and are made in USA.

Read More »
LTC7821 DC/DC Synchronous Controller comes with overcurrent protection.
Controls and Controllers

LTC7821 DC/DC Synchronous Controller comes with overcurrent protection.

LTC7821 DC/DC Synchronous Controller is used for monitorig system voltage, current and temperature for faults. Operated over a 10V to 72V input voltage with 200kHz to 1.5MHz PLL fixed frequency, unit delivers output from 0.9V to 33.5V. Housed in 5 mm x 5 mm QFN-32 package, controller offers clock output for multiphase operation and eliminates inrush currents produced in switched capacitor...

Read More »
Miller Expands ClearLight™ Lens Technology to All Digital Welding Helmets
Helmets

Miller Expands ClearLight™ Lens Technology to All Digital Welding Helmets

Technology optimizes contrast and clarity in welding and light states, reducing eye strain APPLETON, Wis. (Jan. 8, 2018) - Miller Electric Mfg. Co., a leading worldwide manufacturer of arc welding equipment, is expanding its ClearLight Lens Technology to all digital welding helmets. ClearLight optimizes clarity for welding operators so they can produce better welds with less rework. “To achieve...

Read More »
BODY-CASE Enclosure comes with two 18 mm spring bars.
Enclosures

BODY-CASE Enclosure comes with two 18 mm spring bars.

BODY-CASE Enclosure is offered in M 1.96 x 1.61 x 0.65 in. and L 2.16 x 1.81 x 0.66 in. sizes. Product includes top section with PCB location bars, bottom section with four pre-molded drilling centre and a soft-touch matt sealing ring. Meeting IP 65 and IP 67 protection rating, unit’s top and bottom is molded from UV-stable ASA whereas sealing ring is made from Lava or Vermilion TPE. This...

Read More »
TekBox TBST120/60/60/2 Shielded Tent Enclosures feature rigid aluminum supports.
Enclosures

TekBox TBST120/60/60/2 Shielded Tent Enclosures feature rigid aluminum supports.

TekBox TBST120/60/60/2 Shielded Tent Enclosures are used to suppress interference from ambient noise. Units come in an outer dimension of 47.25 in. x 24 in. x 24 in. and can accommodate LISNs or TEM-cells. Products come with two layers of conductive fabric and are sealed using conductive Velcro tape. Weighing 23.75 lb, these enclosures are integrated with filter panel which offers one 240V/10A AC...

Read More »
Hollaender® Manufacturing's Interna-Rail® VUE Chosen for Clear Sight Lines and Low Maintenance Requirements at WesBanco Arena
Guardrails and Railings

Hollaender® Manufacturing's Interna-Rail® VUE Chosen for Clear Sight Lines and Low Maintenance Requirements at WesBanco Arena

CINCINNATI - DECEMBER 20, 2017 - Hollaender Manufacturing, manufacturer of Interna-Rail aluminum railing systems, was chosen by M&G Architects & Engineers to provide railing systems for multiple areas within the WesBanco Arena. Located in Wheeling, West Virginia, WesBanco is a 5,600 seat, multi-purpose arena that hosts a variety of sporting and entertainment events. Built in 1977, the arena was...

Read More »
Composite Advantage Wins CAMX Combined Strength Award For Fiber Reinforced Polymer Composite Wicket Gates
Gates

Composite Advantage Wins CAMX Combined Strength Award For Fiber Reinforced Polymer Composite Wicket Gates

DAYTON, Ohio (December 19, 2017) Composite Advantage was named the winner of the CAMX Combined Strength Award for its Fiber Reinforced Polymer (FRP) composite wicket gate. The Composites and Advanced Materials Expo (CAMX) recognized Composite Advantage and its collaborators the US Army Corps of Engineers Construction Engineering Research Laboratory (ERDC-CERL), West Virginia University and the...

Read More »
ZipWall® Magnetic Door Selected as Finalist for Most Innovative Building Product in NAHB 'Best of IBS' Awards 2018
Doors

ZipWall® Magnetic Door Selected as Finalist for Most Innovative Building Product in NAHB 'Best of IBS' Awards 2018

Recognized among over 300 product entries as a potential "game-changer" ARLINGTON, Mass., Dec. 19, 2017 - ZipWall LLC, maker of the ZipWall® Dust Barrier System, announced today that the ZipWall Magnetic Door has been named a finalist in the Most Innovative Building Product category in the sixth annual Best of IBS Awards for the 2018 NAHB International Builders' Show (IBS), taking place...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics