Adhesives & Sealants, Optics & Photonics

Chemical Resistant, Two Part Epoxy Features Glass Transition Temperature of +240°C

Nov 08, 2016

Widely used in the electronic, aerospace, optical and specialty OEM industries, Master Bond EP126 excels in high temperature applications up to +600°F. This two component product features unique handling properties as Part A is a moderate viscosity liquid and Part B is a powder. It can be easily mixed using a forgiving 100 to 50 ratio by weight. The mixed system is a malleable paste, with an... Read More

Adhesives & Sealants, Optics & Photonics

Optically Clear, Room Temperature Curing Epoxy Blocks UV Light Transmission

Sep 14, 2016

Formulated for specific optical applications, Master Bond EP30-2LB blocks UV light from 200-400 nm and allows the transmission of visible light from 450-900 nm. This two part system is optically clear with a refractive index of 1.55. It also passes ASTM E595 testing to meet NASA low outgassing specifications. Beyond its optical properties, EP30-2LB is a reliable structural adhesive with a tensile... Read More

Adhesives & Sealants, Optics & Photonics

Optical Adhesive features high refractive index.

May 19, 2016

Cured by UV and/or visible light between 315–450 nm, NOA 170 features refractive index of 1.70 at 25°C. Liquid adhesive is recommended for bonding glass to glass and also offers adhesion to cellulose acetate butyrate. When fully cured, adhesive is very rigid and brittle. Product features temperature range of -5 to 100°C, viscosity of 4,500–5,500 cps, and Shore D hardness of 75.... Read More

Adhesives & Sealants, Optics & Photonics, Paints & Coatings

Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion

Jan 12, 2015

Master Bond EP42HT-2LTE is often chosen for a variety of bonding, sealing, coating and select casting applications in the electronic, aerospace, optical and specialty OEM industries. This two component epoxy has a flowable paste consistency that enables precise alignment with minimal fixturing. It cures at room temperature or more quickly with the addition of heat. This system is notable for... Read More

Adhesives & Sealants, Optics & Photonics

Henkel's Loctite® Liquid Optically Clear Adhesives (LOCA) Improve Performance and Design Flexibility for Next-Generation Automotive Displays

May 12, 2014

Henkel offering LOCA demonstrations to automakers and suppliers through June 30 MADISON HEIGHTS, Mich. – Automakers and suppliers looking to improve durability, reduce thickness and enhance readability of their next-generation automotive displays can now take advantage of Henkel's Loctite® Liquid Optically Clear Adhesives (LOCA). Henkel is offering demonstrations at its North American... Read More

Adhesives & Sealants, Optics & Photonics

Dimensionally Stable UV Curable System with a High Glass Transition Temperature

Jul 29, 2013

Suitable for high production applications, Master Bond UV25 offers fast fixture times, rapid curing and high temperature resistance. This multifunctional one component UV curable system was developed for bonding, sealing, coating and encapsulation applications. It is widely used in aerospace, fiber-optic, optical, electronic and related industries. Master Bond UV25’s most notable feature is its... Read More

Adhesives & Sealants, Chemicals & Chemical Processing, Optics & Photonics

High Temperature Resistant B-Staged Adhesive Film Features Thermal Conductivity and Electrical Insulation

Jul 26, 2013

In an effort to mitigate the more complicated preparation associated with B-staged epoxies, Master Bond developed FLM36 for bonding and sealing applications in the aerospace, electronic, opto-electronic and specialty OEM industries. This B-staged film eliminates mixing and measuring and is easy to handle. FLM36 can withstand temperatures up to 500°F and retains its high strength properties upon... Read More

Adhesives & Sealants, Chemicals & Chemical Processing, Optics & Photonics

Silicone Adhesive is formulated for optimal optical bonding.

May 07, 2009

Suited for optical potting, casting, and encapsulation, transparent low viscosity 2-part silicone adhesive MS151 features refractive index of 1.43 and operating temperature range of 65 to +400°F. It cures at room temperature to optically clear silicone rubber, providing electrical insulation as well as resistance to vibration, impact, shock, and thermal cycling. Adhesive has dielectric strength... Read More

Adhesives & Sealants, Optics & Photonics

Clear Epoxy is for bonding and potting optical devices.

Nov 21, 2008

Featuring viscosity of 700-800 cps, Master Bond EP29LP multi-purpose 2-part optical epoxy has low exotherm to peak of 120°F . It adheres to optical fibers, connectors, lenses, and glass and forms high strength bonds of more than 3,500 psi in shear. With temperature range of 60-250°F, epoxy has chemical resistance to water, fuels, acids, bases, and salts. Read More

Adhesives & Sealants, Optics & Photonics

Low Viscosity (15 to 20 cps) UV Curing Optical Adhesive and Coating

Oct 28, 2008

Norland Optical Adhesive NOA 89 is a clear, colorless, liquid photopolymer with a viscosity of 15 to 20 cps that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding where the adhesive can be exposed to UV light. The use of NOA 89 eliminates premixing, drying or heat curing operations common to other adhesive systems.... Read More

Optics & Photonics

Optical Adhesive features refractive index of 1.46.

Oct 13, 2008

Providing optimal bond when using plastic-to-plastic or plastic-to-glass substrates, NOA 84 cures by UV light with max absorption from 320-400 nm and visible light between 400-450 nm. Clear, colorless, liquid photopolymer adheres to CR-39, polarized film, Delrin®, nylon, cellulose acetate butyrate, polycarbonate, acrylics, and glass. Use of one-component, 100% solids adhesive eliminates... Read More

Chemicals & Chemical Processing, Optics & Photonics

Adhesive bonds optical components.

Jul 21, 2004

Optically-clear, ANGSTROMBOND® AB9053 is suited for bonding lenses, prisms, and quartz windows. Acrylic polymer has low refractive index of 1.41, offers UV cure in as little as 1 sec, and withstands temperatures up to 200°C. Supplied in 3 cc syringes, adhesive will bond to glass, ceramic, plastics, and most metals. Read More

Adhesives & Sealants, Optics & Photonics

Epoxy suits opto-electronic assembly applications.

Oct 22, 2002

Silica-filled OPTOCAST 3421 single component adhesive is UV/heat cureable. It exhibits low shrinkage on cure (0.4%, linear) and is ionically clean (max ionic content rated at 15 ppm total Na + K+ Cl8). Result on cure is 85/85 (85°C/85% relative humidity) with 50°C DI water soak resistance. Epoxy has flexural and tensile strengths of 7,000 and 15,000 psi, respectively, and D Hardness... Read More

Optics & Photonics

Adhesive bonds lenses, prisms, and mirrors.

Sep 04, 2002

Suitable for optical bonding, TRA-BOND LX10085 one-part adhesive allows users to take as much time as necessary to make critical alignments, then sets in seconds when exposed to ultraviolet light. Solvent free system meets Federal Specification MIL-A-3920 for optical adhesives and provides optical bonding to glass surfaces, metals, fiberglass, and glass filled plastics. It is suited for military,... Read More

Adhesives & Sealants, Optics & Photonics

Low-Shrink Adhesives provide doublet and lens bonding.

Mar 27, 2002

High-clarity, UV/visible light-curing adhesives offer viscosities from 300 to 25,000 cP and elongation from 120 to 175%. Fiber-optic adhesives include OP-52 medium-viscosity grade and OP-54 low-viscosity, wicking grade for butt bonding, bundling, and splitting. OP-18 may be peeled off like tape, and OP-19 and OP-19G are water soluble grades. Adhesives cure in seconds and offer moisture... Read More

Optics & Photonics

Lens Bonding Adhesives are optically clear.

Nov 28, 2001

Lens assembly adhesives for precision bonding, mounting, laminating, and fixturing applications have good adhesion to lens construction materials and to most metal, coated or painted frames and holders. Applications include cameras, microscopes, as well as eyeglass and sunglass lenses. Special UV blocking grades are available that adhere to PVA, CR-39, and CAP. These flexible lens bonders provide... Read More