GPIB Card includes PCI interface.
Model PCI-1670 features PCI 2.1 bus specification that is fully compatible with IEEE 488.1 and 488.2. With 2 driver control modes, card can perform talker, listener, and controller functions required by IEEE 488.2. It can connect up to 15 GPIB instruments, making it suited for instrument measurement and control. Driver support is provided for libraries used by Visual C++Ã-®, Borland C++...
Read More »Waterproofing Membrane offers solution for crack isolation.
Mapelastic HPG prevents movement of moisture into sub-surfaces of structures that can cause swelling, wood rot, and leaks. Creamy fluid can be applied with trowel, brush, or roller to prevent transfer of cracks through membrane and into tile or stone above it. Membrane meets all requirements for VOC compliance and incorporates BioBlock(TM) antimicrobial protection, which inhibits mold and mildew...
Read More »
Thermoformable Sheeting is based on Fortron-® PPS.
Thermoformable polyphenylene sulfide (PPS) sheet and roll products are suited for applications requiring thermal and chemical resistance and inherent flame retardancy. Available as monolayer sheets and rolls in widths to 48 in. and thicknesses from 0.010-0.25 in., products encompass neat, glass-filled and modified grades containing impact modifiers and tougheners. Melt point enables processing to...
Read More »
Evaluation Kits test embedded CPU boards.
SpacePCÃ-® CPU Evaluation Kits allow users to test features and capabilities of Series 4320, 4200, 2320, and 2110 embedded PC boards. Each kit comes with CPU board that is pre-installed with peripherals interfaced to PC/104-Plus baseboard with PC-style connectors for PS/2, VGA, RJ-45 Ethernet, and CompactFlashÃ-®. Users attach their monitor, keyboard, and mouse, and plug provided AC/DC...
Read More »
5 Common Liquid Injection Molding Mistakes (And How to Avoid Them)
This guide offers insights about steering clear of common LIM problems and maximizing your project's efficiency.
Read More »Wireless PCI Card increases mobility and flexibility.
EliteConnect(TM) wireless networking products incorporate SMC2512W-B high-power wireless PCI card that provides 802.11b connectivity with 200 mW of transmit power and SMC2512W-AG PCI card that brings 100 mW of power with universal connectivity. With operating ranges up to 2,700 and 2,145 ft., respectively, SMC2512W-B and SMC2512W-AG cards overcome indoor multipath distortions. Both cards support...
Read More »Medical-Grade Film is designed for direct skin contact.
Pressure-sensitive MedifixÃ-® 6016/868 consists of soft, conformable, 0.4 mm, transparent polyurethane film coated on one side with medical-grade acrylic adhesive. Product, supplied on 80 gsm white glassine release liner, can also be provided with or without polyethylene delivery film. Applications include wound and IV care, consumer dressings, and cutaneous attachment of medical devices.
Read More »
Transmitted Light Base features slit illumination technology.
Leica HL RC(TM) with Rottermann Contrast(TM) allows contrast of barely visible structures to be observed in positive or negative relief. Light diffusing index of structures, which are invisible in environment, appear as variations in brightness. In positive relief contrast, phase structures appear elevated; while in negative relief contrast, they appear as depressions. Dynamic relief contrast...
Read More »Floor-Patching System strengthens concrete floors.
Resistant to chemicals and abrasion, heavy-duty Ultra Quartz(TM) is trowelable to smooth, nonporous finish and attains compression strength of 9,000 psi. It offers protection against acids, alkalis, water, oils, solvents, and other industrial chemicals. Product can be built up to 1 in. thick on damaged or pitted concrete floors and will not sag, drip, or run. This 100% solids, silica-filled epoxy...
Read More »Embedded DSP Core runs above 600 MHz.
Based on Model ST100 DSP architecture, Model ST122 Dual MAC core is supported by evaluation chip fabricated in 130 nm technology and complete development platform. It can be mapped into versions ranging from ultra-low power to high-speed operation. Flexible instruction modes allow mixture of 16, 32 and 128-bit instructions. Evaluation device includes 16 kbytes of L1 Program cache, 256 kbytes of...
Read More »
Adhesive Film is suited for bonding, splicing and assembly.
DublfilmÃ-® S920 is made up of conformable clear UPVC film, double-coated with high-tack, high-peel acrylic adhesive. Pressure-sensitive adhesive film resists environmental extremes, adheres to ether and ester foams, and bonds to rough and porous surfaces. Supplied on 60 lb release liner, product is suited for bonding and splicing applications, general product assembly, and lamination to EPDM...
Read More »
Acoustic and Thermal Solutions for Original Equipment Manufacturers
Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.
Read More »
