New Generators Products

Generator provides portable, renewable power.

SPDC 2500 Watt electronic generator does not require gasoline to run; it generates AC/DC electric energy from sunlight. Through use of photovoltaic power, unit eliminates production noise and fumes. It also eliminates risk and inconvenience involved in fuel transportation and usage. Self-contained power plant requires no maintenance and can be used to power almost any appliance.

Amplifier/Function Generators handle high voltages.

Models 609E-6-FG and 10/10B-FG will operate as dc stable high voltage amplifiers or function generators. They provide sources for externally amplified signals, adjustable high-level dc voltages, and adjustable high-voltage sine, square, or triangle waveforms. Both work over range of 0.2 Hz to 10 kHz. As amplifiers, 609E-6-FG is rated for 0 to Ã-

Electric Generators provide prime, portable, or standby power.

Packaged generator line can be used for commercial and industrial applications. Generators are available from 200 to 2500 kW in 4-pole, 1800 rpm machines in 4-frame diameters, and from 200 to 1750 kW, 3 phase, in 6-pole, 1200 rpm machines in 3-frame diameters. All standard 50 and 60 Hz 3-phase voltages are available up to 3300 V at 50 Hz and 4160 V at 60 Hz. Single-phase models are also available.

Accessory Kit supports function generator users.

Model TLFG kit eliminates time consuming task of collecting cables and adapters just to get started. It has parts that are used every day, including: BNC (m) cable assemblies with RG-58C/U cable and molded bend relief boots; BNC (f) breakout with miniature alligator clips and 9 in. silicone wire; BNC (f) breakout with 0.031 sockets; MiniFlex IC clips; MicroClip IC clips; BNC (f-m-f) in-series...

Considerations for Choosing a Plastic Injection Molder

Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.

Pulse Generator uses standard 115 Vac power source.

Model 4030 10 MHz pulse generator is capable of producing pulsed waveforms with variable symmetry and amplitude to test digital logic circuits, shift registers, and response time of opto-isolators. Manual mode allows one pulse to be generated each time pushbutton is pressed. External triggering mode allows pulse generator to be synchronized to external signal, such as external clock frequency...

Power System incorporates welder into boom lifts.

SkyWelder(TM) system features Miller(R) Model CST 250 welder, which has 5 to 250 amp range and can be used for stick and TIG welding applications. Power leads run through boom's power track to 7,500 W generator mounted in engine compartment which supplies power to welder and to 110 Vac platform receptacle. Welder is integrated into boom lift's platform beneath the control panel. Available on...

Electric Generator produces 6,100 W.

DP6000 can run for 12 hr at half load and 9 hr at full load. It has electric start 12-hp Kohler engine with cast-iron cylinder sleeve and quiet muffler. Low-oil shutoff helps extend life while automatic idle control provides better fuel economy and helps prevent surges when operating power tools. It has maintenance-free, brushless alternator; GFCI protection; hourmeter; and overload indicator....

Generator adds additional power to boom lifts.

SkyPower(TM) generator provides 7,500 W of 110 or 220 Vac power at platform for added work efficiency. Power cable is routed from base-mounted generator through boom power track to GFIC outlet in platform. Air line is also routed through power track for operation of pneumatic tools or pressure washers. SkyPower is available on boom lifts with platform heights ranging from 40 to 135 ft.

Power System incorporates lighting into boom lifts.

Sky Bright(TM) package uses 4 or 6 lights on platform to turn boom lift into 6,000 watt light tower. Power is provided by SkyPower(TM) generator delivering up to 7,500 W of 110 Vac power. Nite Bright(TM) accessory has four 40 watt lights mounted on chassis, and two 40 watt lights mounted on platform for work in low light conditions. Both options are available on boom lifts with platform heights...

Stick/TIG Inverter provides simple operation.

CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...

What Can Test Devices Spin for You?

Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.