Generators operate on gas with variety of methane levels.
Driven by electronically controlled, lean-burn gas reciprocating engines, CatÃ-® G3500E Series natural gas-fueled generator sets operate on Miller Combustion Cycle. They deliver mechanical efficiency up to 44.5% due to camshaft and turbocharger design. Models G3516E and G3520E are 16- and 20-cylinder units operating at 50 Hz/1,500 rpm and 60 Hz/1,200 rpm respectively. Both incorporate...
Read More »
Portable Generator features continuous, quiet operation.
Able to run continuously for 11 hr, YG4000D employs 4-stroke OHV, 251 cc engine that produces 8.5 hp for max output of 4,000 W. It weighs 132 lb, occupies 6.0 ftÃ-³, and operates at noise level of 69 dB. Features include cast-iron cylinder liner, brushless alternator, and Oil Watch warning system. Auto decompression system and transistor controlled ignition ensure reliable operation. Fitted...
Read More »
Portable Generators output 1,100 to 4,300 W.
Power Series delivers stable power through automatic voltage regulation. Model R1100 is powered by EH09-2 OHV gasoline engine, while Models RG2800DX, RG3200DX, and RG4300DX are powered by EX17, EX21, and EX27 OHC gasoline engines, respectively. Reverse cooling allows generators to be fully enclosed without threat of overheating. Model RG4300DX includes Multi-Monitor, which integrates AC...
Read More »
High-Power Generators feature impact-resistant design.
Models G2800L and G4300L are 2,800 W and 4,300 W generators with EX Series air-cooled engines utilizing chain-driven overhead cam technology. They include automatic compression release system and recoil starter system with electronic ignition. Equipped with overhead valve engine, 2.5 hp Model G1100 offers max output of 1,100 W. It includes 1.1 gal fuel tank with 4.2 hr runtime. All feature oil...
Read More »
Understanding Food & Beverage Lubricants
The term "food-grade lubricants" may sound like another name for food oils such as cooking spray, salad dressing, lard, or canola oil, but it actually refers to lubricants that are safe for use in food processing equipment.
Read More »
Signal Generators offer frequency ranges to 67 GHz.
PSG microwave signal generators are suited for use by engineers and system integrators who evaluate RF and microwave components. Analog units include E8257D models with frequency ranges of 50 and 67 GHz and output power greater than +12 dBm. Vector units include E8267D models with frequency ranges of 32 and 44 GHz. With wide modulation bandwidth option, vector signal generators can directly...
Read More »Digital Delay and Pulse Generator comes in benchtop model.
Equipped with 4-line display, Model P400 includes spinner knob and navigation buttons as well as optional Ethernet interface. Its 4 channels can be independently controlled as delay / width or leading / trailing edge pulses, while on-board help system explains each button, input, output, and setting. With 25 ns insertion delay, unit can be used in lab setups with tight tolerances and allows...
Read More »
Waveform Generator PCI Card generates signals to 125 MHz.
Using 14-bit D/A converters, UF6031 Arbitrary Waveform Generator (ARB/AWG) PCI card for PCs generates complex analog signals at rates of 125 MS/s on both channels. Device also includes up to 512 MB onboard signal memory that allows each channel to generate signals up to 256 MS. It features 3 software-selectable hardware filters, external clock and trigger connectors, and Total Harmonic Distortion...
Read More »Generator offers multiple power sources from one engine.
Hydrapack2, powered by Yanmar diesel engine, combines hydraulic power pack and electric generator. Rated for continuous duty, product provides simultaneous power for two 10 gpm hydraulic tool circuits or one 10 gpm hydraulic tool circuit and 4,000 W, 30 A electric generator. Unit features two 120 V outlets, one 12 V outlet, and 2 adjustable (0-10 gpm) hydraulic tool circuits @ 2,000 psi....
Read More »
Signal Generator offers signals from 250 kHz to 2.7 GHz.
Model PXI-5670 RF Vector Signal Generator provides 22 MHz real-time bandwidth and true, 16-bit resolution arbitrary waveform generation at 100 MS/s. It can produce analog and custom digital modulation as well as standard digital modulation formats such as ASK, FSK, MSK, PSK, and QAM. Deep memory up to 256 MB offers extended playback time for complex modulated signals, addressing need for...
Read More »
Welding Generator offers multiprocess welding ouput.
Mid-frame, diesel engine-driven PRO 300 CC/CV provides Lift-Arc(TM) TIG arc starts suitable for code-quality welds on process pipe and true CV output for flux cored wires used for structural steel. Measuring 32 x 26 x 56 in., unit weighs 1,100 lb and utilizes 1,800 rpm CAT diesel engine. It produces 20-410 A multiprocess welding output (Stick, TIG, MIG, Flux Cored) and 12 kW of generator power.
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
