Leesburg Concrete Company, Incorporated Steps Up
Concrete

Leesburg Concrete Company, Incorporated Steps Up

In Autumn 2013, Leesburg Concrete Company, Incorporated (LCCI) produced an Architectural Precast concrete step system which was installed in front of the Starbucks in a premier Orlando Theme Park. The step system included blockouts for large cylindrical decorative columns, custom color and texture. Leesburg Concrete Company, Incorporated also successfully built benches for the same customer...

Read More »
Planks

Tatra Plastics Announce the Manufacture of Fox Proof Chicken Houses from High Density Plastic Planks

PR What’s believed to be the world’s “fox-proof” chicken house is being manufactured from high density polythene Click & Fix plastic planking made by Tatra Plastics Manufacturing WWW.PLASTICPLANKS.CO.UKÂ-  at their factory in Norwood Green, Wyke near Bradford. All the walls and roof panels are made from Click & Fix, and metalwork and the roof edging and cap are made from a plastic...

Read More »
Lights

Power and Light System produces 50,000 lm.

For portable power and light, 2-Headed XT LENTRY® Polelight has two 650 W halogen lights on single telescoping pole, 1,600 W Honda EU2000i generator, and all-terrain retractable LENTRY legs. Each light head produces 25,000 lm, has its own on/off switch, pivots forward and backward, and rotates more than 400°. System stands about 9 ft tall with legs and polelight fully extended. With...

Read More »
Reversible Plate Compactors feature two exciter shafts.
Plate / Roller Compactors

Reversible Plate Compactors feature two exciter shafts.

Available inÂ- three models with 9.3 hp Honda gas-powered engine or Hatz diesel-powered engine, Reversible Plate Compactors deliver up to 11,241 lb of centrifugal force. Compactors feature travel speed up to 85 fpm, working width from 20–25 in., and 4,200–5,400 vpm. Capable of operating in tight spaces, machines are suitable for large foundations, retaining walls, and compaction of side...

Read More »
Mid-Size Rammers prepare jobsites for flat finish.
Rams

Mid-Size Rammers prepare jobsites for flat finish.

Employing GXR120 Honda engine, ATC130H and ATC170H are suited for use in confined spaces, deliver 650–700 blows per minute, and offer 2,800–3,500 lb of impact force. Design incorporates protection for engine, and 3-way throttle lever shuts down engine as well as fuel supply. Along with built-in tachometer and hour meter, rammers offer capacities of up to 3,800 ftÂ-²/hr compacted area and...

Read More »
Cold Milling Machines feature rear rotor design.
Milling Machines

Cold Milling Machines feature rear rotor design.

Designed to extend cutting tool life, BM-35 Series features BMS 15 interchangeable holder system, which utilizes single bolt for holder retention and requires low tightening torque of 75 lb-ft. Low front face position maximizes efficiency while allowing full tooth rotation. In addition, machines incorporate logical operating layout, intuitive controls, and low noise levels. Vibration isolated...

Read More »
Laser-Guided Screed meets or exceeds F-number requirements.
Screeds

Laser-Guided Screed meets or exceeds F-number requirements.

Utilizing 12 ft wide screeding head and 16.5 ft telescopic boom, LS175 LaserStriker screeds 192 ftÂ-² per pass. System incorporates 59 hp Kubota turbo-charged diesel engine and heavy-duty auger plow powered by hydraulic system, which helps in maintaining grade for smooth finish, even when screeding low-slump concrete. With 360° upper frame rotation, it is possible to screed from all...

Read More »
Mortar Mixers meet needs of masonry contractors.
Masonry Equipment

Mortar Mixers meet needs of masonry contractors.

Comprising models with 6 and 8 ftÂ-³ capacities, Mortar Mixers are powered by Honda engines and feature steel design for extended life expectancy. High-speed hubs feature grease axle bearing, and number of paddles optimizes mix quality. Suited for use by masonry contractors, mixers also feature rugged, hinged shroud that covers engine.

Read More »
Leak-Tight Connectors mate to shallow depth threads.
Connectors

Leak-Tight Connectors mate to shallow depth threads.

Providing safe manual or automated leak-tight connections to shallow depth female threads, FN Series is suited for vacuum testing, media filling or flushing, and performance testing. Modular units enable rapid change outs between squeeze lever, pneumatic thumb, and pneumatic pilot actuation methods to meet application. Constructed of stainless steel and anodized aluminum, connectors feature split...

Read More »
Mechanical-Drive Riding Trowel is ergonomically designed.
Power Trowels

Mechanical-Drive Riding Trowel is ergonomically designed.

Intended for large and small contractors, Mechanical Super Pro (MSP) 470 is powered by 44Â- hp, air-cooled Kubota diesel engine and offers hydraulic power steering with independent manual pitch controls. Raised operator platform and hydraulic joystick steering lend to ergonomics, and two 46 in. dia, 5-blade, non-overlapping rotors operate at speeds to 180 rpm. Other standard...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers