CPC Introduces BLQ2 Connector with Zero Seal Friction, Non-Spill Design
CPC (Colder Products Company) has extended their LQ Series of quick disconnects with the new BLQ2 connector. It has a blind mate option and the highest flow capacity of 1/8-inch connectors in the liquid cooling industry. The BLQ2 simplifies connections and is designed for connection tolerance. It is 23% better than other 1/8-inch connectors on the marketing and reduces pressure drop by 34%. It...
Read More »
Richardson Introduces ADI-DPD-DEVKIT SDR Kit with Scalable RF Front End Board
The ADI-DPD-DEVKIT Software-Defined Radio Kit is optimized for FDD-LTE Bands 14 and 28 bands. The kit consists of DE705, ADRV9375-W/PCBZ and EVAL-TPG-ZYNQ3 boards. The DE705 board comes with single-channel transmitter and receiver with swappable ceramic duplexer. The kit offers +37 dBm (average Pout) and 55 dB linear gain. The EVAL-TPG-ZYNQ3 board provides a data capture platform for...
Read More »
TE Connectivity to Showcase High-Speed Innovations at DesignCon 2019
Live demos will show the latest developments in high-speed system solutions Harrisburg, Pa., Dec. 14, 2018 /PRNewswire/ -- TE Connectivity (TE), a world leader in connectivity and sensors, will showcase a broad range of industry-leading high-speed data communications connectivity solutions in booth 817 at the DesignCon 2019 expo Jan. 30-31 in Santa Clara, California. TE offers a full...
Read More »
Southwire Presents Maxis XD1 Circuit Puller with One-Person Set-Up and Operation
The Maxis XD1 Circuit Puller accepts 18V drills and delivers continuous pulling power up to 600 lbs and peak power of 1,000 lbs. The unit offers both strength under load and speed for performing the job on time.
Read More »
Understanding Crane and Hoist Classifications
Building success: Crane & Hoist Design Criteria
Read More »
New Inserts Available in Three Different Geometries
The Walter WMP45G Tiger-tec Gold grade are new round indexable inserts for the F2334R copy milling cutter. The inserts is available in three different geometries of D57, D67 and F67 in order to suit various machines, clamping arrangements and workpiece geometries. The WMP45G grade was designed for turbine blade machining as they can handle both face milling and copy milling of martensitic and...
Read More »
UltraFlex Using Induction Heaters to Preheat Carbon Steel Threaded Rods to 148°C (300°F) within 17 Seconds
[Dec 3rd, 2018] A new demo by UltraFlex Power Technologies - a leading provider of digitally controlled induction heaters - showed how carbon steel threaded rods of different size could be heated to 148°C (300°F) within 17 seconds. The demo showed that performance requirements in manufacturing could be easily met by using induction heating solutions, without affecting the quality of the heating...
Read More »
Keyssa Reinvents I/O to Pave the Path for New Consumer and Industrial Product Designs
CAMPBELL, Calif., Nov. 19, 2018 /PRNewswire/ -- Keyssa®, the leader in high-speed, contactless connectivity, today announced its Virtual Pipe I/O (VPIO) architecture that enables I/O to scale with processor/memory performance and allows product designers to develop new classes of products. Additionally, Keyssa's previously announced next-generation solid-state connector, the KSS104M is...
Read More »
Everlast® Replaces Failed Cedar Siding on Condominium in Historic Salem, MA
Advanced composite siding selected for woodgrain finish and unmatched longevity OAKMONT, PA (November 12, 2018) – Originally built in 1980, the condominium building located at 1 Washington Street in Salem, MA recently underwent a complete building envelope replacement featuring Everlast® Advanced Composite Siding, 4-½ inch planks in Flagstone color. The condition of the building showed an...
Read More »
New Miura Board Building Material is Suitable for Heavy Traffic Outdoor Applications
The Miura™ Board Building Material is available with 10% carpet backing up to 70% based on the requirement of finished product. It is made of continuous extrusion and lamination that allows required length and thicknesses between ¼ in. and 2 in. The Miura Board is suitable in siding, decking, reusable concrete forming, and marine applications. The product can be drilled, cut, routed, and...
Read More »
Xuron Presents New TK2600 Bead Stringer Tool Kit for Handling Bead Wire and Findings
The TK2600 Bead Stringer Tool Kit consists of Model 410 Micro-Shear® Flush Cutter, Model 450 TweezerNose™ Pliers and a Model 494 4-in-1 Bead Crimper. The tools are offered with Rubber™ cushion grips and Light-Touch™ return springs. The Flush Cutter cuts soft wire up to 18 ga whereas the Pliers is used for grasping, bending and forming wire. The Bead Crimper features 3 folding stations for...
Read More »
Delivery Equipment That Really Delivers
Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.
Read More »
