Wheel Dozer offers ergonomically designed operator station.

Wheel Dozer offers ergonomically designed operator station.

Powered by Cat 3406E diesel engine with Electronic Unit Injection (EUI), 824G Series II Wheel Dozer has 63,325 lb (max) operating weight. Its 6-cylinder, turbocharged, air-to-air aftercooled engine delivers 339 hp. Offerings include advanced Modular Cooling System (AMOCS), extreme-duty planetary powershift transmission (4 speeds forward, 4 reverse), Electronic Clutch Pressure Control, and steel...

Read More »
Grips and Caps hang and display products.

Grips and Caps hang and display products.

Dip-molded Hanger Grips are made of PVC and have slip-resistant finger grooves. They are offered in diameters of .625 to 1.25 in. Standard length is 4.50 in. Hanger caps are made of flexible vinyl in diameters from .625 to 2 in. Standard length is 2 in. Grips and caps fit firmly on products and feature loop hanger end that makes product easy to hang on hooks and display racks in stores, garages,...

Read More »

Hammers are offered in combination and demolition models.

Models 11241EVS SDS-max and 11248EVS Spline are 1 9/16 in. units powered by 11 A motors. They provide 1,700 to 3,300 bpm operating at 0-170 to 340 rpm. Models 11240 SDS-max and 11247 Spline are 1 9/16 in. units powered by 10 A motors that provide 5.2 ft-lbs of impact energy, 400 rpm, and 3000 bpm. Combination Dual Mode Selector converts each unit from rotary hammer to hammer only. Models 11388...

Read More »
Cutters and Inserts handle heat resistant alloys.

Cutters and Inserts handle heat resistant alloys.

Made with ceramic grade Kyon 2100, cutters work at speeds of 3000 sfm to rough mill nickel, cobalt, and iron based heat resistant alloys. Cutters and inserts also machine Waspalloy, Haynes 25, Inconel 718, Stellite and similar materials at cutting speeds of 2000 to 4500 sfm and feed rates of 0.002 to 0.005 ipt. Also available are KC9110 and KC9125 inserts, both with 3 coating layers: TiCN,...

Read More »
Backhoes offer digging depth up to 9 ft 6 in.

Backhoes offer digging depth up to 9 ft 6 in.

BH30 and BH30 w backhoes are designed for use with Cat-® Skid Steer Loaders and Multi Terrain Loaders. Each feature frame that allows unit to be shifted manually to left or right of center. Side shift length for BH30 and BH30 w is 33 in. and 39 in., respectively. Each backhoe model has 180-° boom swing to enhance digging capabilities in tight spaces. Left and right vertical stabilizers level...

Read More »
Hydraulic Excavators feature increased hp and operator comfort.

Hydraulic Excavators feature increased hp and operator comfort.

Models 318C L and 315C LN each produce net power of 125 hp (93 kW) using 6-cylinder, turbocharged Cat-® 3055T diesel engine. LN version features transport width of 8 ft 6 in. when equipped with 20 or 24 in. shoes. L version has transport width of 9 ft 3 in. with 24 in. shoes. Both models use open-center, 2-pump hydraulic system with automatic boom and swing priority. Maximum digging depth is 20...

Read More »
Palm Nailer Kit offers 4 interchangeable nose tips.

Palm Nailer Kit offers 4 interchangeable nose tips.

Model PN650 6 1/2 in. nailer kit includes non-marring finish tip for finish nails up to 3d, magnetic tip for common nails between 3d and 16d, standard tip for common nails up to 70d, and steel hammer tip for moldings and dowels. Multi-bow action provides 2,300 bpm at 100 psi. Once nail reaches desired depth, fluctuating piston disengages to stop driving nail. Kit includes padded glove for added...

Read More »
Nailers drive finish nails up to 2 1/2 in. long.

Nailers drive finish nails up to 2 1/2 in. long.

Model FN250B uses 16 ga finish nails between 3/4 and 2 1/2 in., while Model DA250B fires standard 15 ga angled finish nails between 1 and 2 1/2 in. long. Both include internal piston catching mechanism, tool-free adjustable depth control with over 45 pre-set detents, tool-free 360-

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics