Nailers

Plastic Cap Nailer has 500 in.-lb driving power.

Model N66BC-1 secures 1 in. dia plastic cap over target area until nail fastens it into place, reducing tear-through and providing holding power for materials that require skin-tight application, such as felt paper and foam board insulation. With magazine capacity of 300 nails and 100 caps, it accepts fasteners 1Â-¼-2½ in. in length and .08-.092 in. dia. Features include lightweight...

Read More »
Timing Belts feature .080 pitch.
Belts

Timing Belts feature .080 pitch.

Made of Kevlar-reinforced polyurethane, Series A6B16-D offers positive, non-slip power transmission without vibration, chatter, or backlash. Double-sided tooth action enables belts to wind between pulleys to synchronize shaft rotations. Capable of operating in temperatures from 0-180°F, and intermittently to 248°F, belts are available in widths of 1/8, 3/16, Â-¼, and 3/8 in. with...

Read More »
Belts

Timing Belts provide synchronous control of drives.

Offered in Â-¼, 5/16, and 3/8 in. widths, Series A 6G3, A 6B3, and A 6R3 feature .200 in. pitch and molded teeth on one side for positive power transmission without slip, vibration, or backlash. Small pitch belts can wind around number of small pulleys to permit multifunction operation in synchronizing shaft rotations. With 20-590 grooves and pitch lengths from 4-118 in., belts come in...

Read More »
Spliceable Timing Belt Stock has 60 teeth per foot.
Belts

Spliceable Timing Belt Stock has 60 teeth per foot.

Made of nylon-covered, fiberglass-reinforced neoprene, A 6R3-C timing belt stock can be spliced to suit designs where nonstandard endless belts are not available. It comes in 3 belt widths and operates continuously in temperatures from -30 to +185°F. Produced with 1/5 in. pitch and trapezoidal teeth on one side, product provides positive, non-slip power transmission without vibration, tool...

Read More »
Cylinders

Rodless Cylinders meet or exceed life of 3,000 km.

Supplied with air cushions and centralized piping, double acting MY2 Cylinders have stroke adjusting unit and do not require lubrication. Thrust forces range from 40-1,005 N, cylinder strokes extend from 100-5,000 mm, and max operation speed is 1,500 mm/sec. Offered in bore sizes of 16, 25, 40, and 63 mm, low-profile MY3 Cylinders provide strokes up to 3,000 mm and are available with floating...

Read More »
Cable Puller enables one person to pull one ton.
Pullers

Cable Puller enables one person to pull one ton.

Weighing 67 lb, Ultra Tugger® 2-cable, 2,000 lb Puller features 2-speed integral motor and can be folded up and lifted by one person. To set up puller, user attaches telescopic boom and pivoting elbow to conduit using Quick Latch, and adjusts boom angle and length to particular pull. Quick Latch system matches up to threads of any size conduit and holds securely when clamp is tightened...

Read More »
Tractor-Scraper comes equipped with bowl or auger.
Scrapers

Tractor-Scraper comes equipped with bowl or auger.

Featuring Cat® C18 engine for tractor and Cat® C15 engine for scraper, Model 657G provides max travel speed of 36 mph, max cut depth of 16.7 in., and max spread depth of 26.8 in. Both engines feature Mechanically-actuated Electronically Controlled Unit Injection and have dual horsepower capabilities. ACERT(TM) technology minimizes emissions during combustion process, while cooling...

Read More »
Aligners

Alignment Kit helps check and align large machine tools.

Able to measure machinery rail straightness, parallelism, surface flatness, and other alignments, Microgage Universal Alignment Kit includes laser transmitter and digital receiver connected to handheld display. Readings appear on LCD, and alignment units are presented in 0.001 or 0.0001 in. increments or in millimeters. Other components include rotating base, 90° beam bender, and heavy-duty...

Read More »
Nailers

Gas Powered Nailer offers cordless operation.

Powered by interchangeable, 7.2 V NiCd battery and fuel rod, framing Model NR90GC drives up to 2 nails/sec and 1,000 nails/hr. Battery will fire over 4,000 nails per charge and each fuel rod fires 1,200 nails. Six-nail lockout feature prevents accidental dry-fire, assuring nails are lodging securely. Utilizing clipped-head nails up to 3Â-½ in. x .131, Model NR90GC includes adjustable...

Read More »
Bench Grinders

Waterfeed Angle Grinder suits stone cutting.

Designed for use with diamond hole saws, 5 in. MP-1165W features spiral beveled gears and miniature brass ball valve with nylon seals to prevent leakage. Two-step safety lever prevents accidental start. Stainless steel spindle with wrench flats allows for removal of hole saw while dead handle offers stability and control when cutting. Grinder also features stainless steel feeder tube, 6 ft....

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers