HARTING's New SMC (Surface Mount Compatible) Series of DIN 41 612 Product Range
Connectors

HARTING's New SMC (Surface Mount Compatible) Series of DIN 41 612 Product Range

DIN 41 612 SMC connectors The voltage transfer capability of the new SMC (Surface Mount Compatible) series of HARTING's DIN 41 612 product range has now been tripled. These impressive performance gains were achieved due to the use of special plastics featuring higher CTI values. These new plastics comply with the Group II (400 < CTI-value < 600), while the standard plastics are classified as...

Read More »
Transparent Receiver facilitates bore alignment.
Signal Receivers

Transparent Receiver facilitates bore alignment.

Designed to operate with Laser Microgage 2D, Transparent Receiver allows laser beam to pass clearly through it while making precise position measurement for aligning machinery and equipment. Compact unit fits in small places for bore alignment, lathe and spindle alignment, checking machine tool runout, and roll and web alignment. Operating over distances of 100 ft or more, receiver delivers...

Read More »
Festool USA Announces the Launch of Three New Products
Sanders

Festool USA Announces the Launch of Three New Products

Lebanon, In, October 13, 2009 - Festool USA announces three new products available now, including T 12+3 and T 15+3 Cordless drill/drivers (non-set versions), hand sanding blocks, and Systainer SYS 2 Attic. These products highlight the beauty of the Festool system," says Rick Bush, Festool Product Manager. Bush continues, "For those who already have our drills or are just starting, the T + 3...

Read More »
Nailers

Powernail, the Leader in Hardwood Flooring Tools is Now Available at Nail Gun Depot

Powernail hardwood flooring tools and fasteners provide the speed, durability, and precision for the most demanding installers. Cincinnati, OH, November 25, 2009 -- Nail Gun Depot is always looking for new items to meet the needs of today's ever-changing marketplace. Founded in 1946, Powernail has been a leader in flooring tools for more than fifty years. Their tools are used for the installation...

Read More »
Martel Quik-Test(TM) Pneumatic Kit
Calibrators

Martel Quik-Test(TM) Pneumatic Kit

Derry, NH, November 20, 2009. Martel Electronics Corporation continues to work to make the job of instrument calibration easier, by offering a complete line of tool-less calibration connection fittings. That's right, only finger tight is required for a calibration-good seal from vacuum to 5,000 PSI (350 Bar). The basic Martel Quik-Test(TM) pneumatic kit (QCN-100P) includes connectors for both...

Read More »
Cove Four Goes Green & Expands Product Line
Handles, Pulls and Levers

Cove Four Goes Green & Expands Product Line

Cove Four produces precision-formed wire products, wire forms, wire wreathes, masonry ties, anchors, wall ties, springs and assemblies for a variety of industries. We have thousands of tools available for hooks, wire springs, wire pins, pail handles and bails for over four decades. Our world class manufacturing processes will make a difference in your next design project." Cove Four is proud to...

Read More »
Connectors

Connector Inserts optimize EPBX connector contact density.

Inserts for EPXB and QM connectors are available in high-density 48 size 22 contacts and 69 size 24 contacts arrangements. Available in environmentally sealed or unsealed versions, both offer optimized space for signal contacts and are compatible with existing crimp and PC tail contacts. Configuration promotes integration flexibility for designers while maintaining form factor of existing EPXB...

Read More »
Hybrid Excavator helps minimize greenhouse gas emissions.
Excavators

Hybrid Excavator helps minimize greenhouse gas emissions.

Powered by Komatsu Hybrid System, Hybrid PC200LC-8 uses electric swing motor, power generator motor, capacitor, and diesel engine to help minimize environmental impact. Turbocharged, air-to-air, after-cooled SAA4D107E-1 engine provides 138 hp. Featuring operating weight of 42,642-47,260 lb and bucket capacity of 0.66-1.57 ydÂ-³, excavator includes 7 in. LCD monitor for onboard diagnostics,...

Read More »
Drywall Carts feature all-welded tubular steel frame.
Drywall Equipment

Drywall Carts feature all-welded tubular steel frame.

PRO-LITE carts are available in 16 models, and in varying widths of 20, 24, and 28 in. and 3 bumper styles. All 12 in. deck models have load capacity of 3,200 lb and range in weight from 60-70 lb, while 18 in. decks can carry up to 3,600 lb and weigh 70-80 lb. Non-marking, 8 x 2 in. elastomer swivel casters offer maneuverability over all types of surfaces. Units are offered with 2 types of decks;...

Read More »
Impulse Hammers feature TEDS capability.
Electric Hammers

Impulse Hammers feature TEDS capability.

With head weight of 100 g, 5800BT Series of impulse hammers are available in 5 ranges, between 50-1,000 lbf. Acceleration compensated quartz force sensor ensures that hammer's self-resonances do not produce spurious bumps in output spectrum. Hammers include head assembly containing force sensor and handle with rubber grip, as well as interchangeable head extenders and variety of impact tips,...

Read More »

All Topics