New Blocks Products

Analog I/O connects via network.

Additions to CompactBlock(TM) LDX I/O include analog and temperature blocks, plus networking. Analog blocks bring in current and voltage data from valves, pressure sensors, and related field devices. Temperature blocks accept signals from T/Cs and RTDs, and provide scaling for different device types allowing module to convert signal from any standard T/C or RTD into Fahrenheit or Celsius grade...

Spring Clamp Blocks have Class I, Zone 1 approval.

The fasis Series spring clamp terminal blocks meet UL 2279 hazardous location requirements with exception of disconnect and fuse terminals, which compromise no spark requirements of Class I, Zone 1 approval. Series includes feed-through, ground, double-tier, and miniature blocks for variety of control applications. Zone 1 approval covers use of terminals in Zone 2 applications also.

Distribution Blocks come with spring cage terminals.

FLKM-PVB power distribution modules are available in 16, 24, 32, and 48 positions, all with spring cage terminals. Each module is equipped with two potential connections: P1 and P2. Each supply terminal is capable of accepting up to 10-gauge conductor, and each distribution terminal is capable of accepting up to a 12-gauge conductor. There are no external bridging connections to be made on this...

Offset Block allows quick tool change.

Tool Length Offset Block eliminates lengthy tool setups, and chipped or broken tools. It allows user to touch off any type of tool in about 30 sec. All tools will be within .0001 in. of each other, eliminating question of which tool to adjust on first piece from setup.

Choosing the Right Load Ring for Your Needs

A Temper® Load Ring, also known as a Constant Force Adjustable Spacer, is a precision ring designed to perform as a predictable constant force element. It is fabricated from ductile, high strength stainless alloys.

Terminal Block has plug-in contact.

ST-COMBI terminal block, designed for ST spring cage terminal block series, has 2.5 sq mm conductor that plugs into 5.2 mm wide plug with IEC rating of 24 A and 500 V. Contacts in terminal block and plug connector are touch proof. ST-COMBI uses standard ST dual bridge channel so both product families can be combined on rail using same jumper.

Terminal Blocks provide alternative connections.

253 Series printed circuit board terminal blocks have 2 push wire connections: one parallel to PCB and one perpendicular. Alternative connection allows electrical potential to be looped without additional terminal blocks. Solid conductors with cross section from 20 to 16 AWG can be connected. Series is rated at 500V, and carries load current of 10A. Pin spacing is 5 mm.

Spring Terminator fits chassis-mount applications.

DIN rail-mounted 869 Series Cage Clamp Compact, with current rating of 20 A at 300V or 5A at 600V, connects 28-12 AWG. Screw-fixing and snap-in mounting options provide safe support to terminal strips. Terminal blocks are assembled into multi-pole terminal strips with standard numbers of poles or can be custom assembled to any length. Marking and jumping options are also available.

Tiny Terminal Block has spring clamps.

WKMF Series miniature spring clamp blocks make wiring easy in space restricted applications. Blocks mount on TS-15mm DIN rail and have 30.5mm profile off rail, enabling shallow cabinet terminations, such as in remote junction boxes for signal and power distribution or door wiring for push buttons, indictor lights and switches. Blocks are made of polyamide 6.6 and have UL94 V-0 flammability...

Fuseblock facilitates installation in SMD automation.

OGN-SMD fuseblock can be surface mounted with 5x20 mm pre-loaded fuses, eliminating need for mounting block, fuses, and cover in separate steps. Heat-resistant UL 94 V-0 plastic withstands heat of vapor phase and reflow soldering. Fuseblock is rated to 10A/250V. Rated power acceptance at ambient air temperature, with or without reflow cover, is 4W; with transparent cover, 2.5W. Pin spacings of...

IEC Terminal Blocks allow for direct mounting.

IEC Terminal Blocks consist of Feed Through Blocks, Spring Clamp Blocks, Insulation Displacement Blocks, Double and Triple Level Blocks, Tab Connection Blocks, and IDC to Screw Clamp Blocks. In addition to meeting IEC specifications and standards, terminal blocks meet UL and CSA approval. Housings are molded out of 6.6 polyamide, and metal bodies are made of nickel-plated, copper alloy. They are...

Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application

Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.