New Blocks Products

Fuse Terminal Blocks come in one- and two-level versions.

Offering fuse protection in 6 mm of space on DIN rail in cabinet, MPFA.4 single-level fuse block and DSFA.4 double-level fuse block use ATM mini plug-in fuses and incorporate plug-in jumper. Non-indicating version is standard, but another version provides LED indication of blown fuse. Offered in 2 versions, double-level fuse terminal block has feed-thru termination on bottom level and fuse...

Terminal Strips incorporate snap-in strain reliefs.

Molded from PA6 to UL94V2, 3-pole CSRTB terminal strips with integral strain relief are available in 3 sizes rated for 6, 10 and 16 A loads and snap-fit to panel for fast deployment. Protecting wires from twisting, fraying, or pull-out due to stresses and strains when mounted, strain relief slides over integral posts to secure cables, and are releasable should rewiring, maintenance, or adjustment...

ASP045 Series of Pluggable Terminal Blocks

The ASP045 series of pluggable terminal blocks feature RIA CONNECT's unique SPRINGCONÃ-® technology. It is the perfect drop in replacement for the industry's 5mm screw type equivalents. The parts ship wire ready and do not require the use of a screwdriver. Immune to vibration, the spring clamp design provides a quick and easy gas tight connection. Accepting wires ranging from 16-28 AWG and...

New Cooper Bussmann-® UL1953 Listed Enclosed Power Distribution Blocks Offer High Short-Circuit Current Ratings

ST. LOUIS, March 1, 2007 - With high short-circuit current ratings (SCCRs) of up to 200kA, the new Cooper BussmannÃ-® enclosed power distribution blocks are the first of their kind to be UL1953 Listed and also recognized as being IP-20 finger-safe under specific conditions. The enclosed power distribution blocks can replace low-rated power distribution blocks to achieve higher assembly SCCR,...

Saving Energy with Efficient Belt Drives

By introducing energy efficient belts on electric motor drives, you can implement a simple, cost-effective solution to achieve energy savings in your facility.

Safety Blocks feature high strength construction.

Constructed of lightweight aluminum with high-strength steel adjusting heads, Press/Die Safety Blocks feature load rating and press number engraved into block body for permanent record. Units are available in variety of ratings and sizes to accommodate any machine application. Optional block holder is available for safe storage.

PCB Connectors suit high voltage applications.

Suited for wire-to-board applications, GMSTB(A) 2.5 HC(V) consists of high-voltage header and plug with screw connection. It features 7.62 mm pitch and voltage ratings of 1,000 V IEC, 600 V UL. Integrated double-steel covering springs provide contact safety even at high power, severe temperature fluctuations, and in high-vibration environments. Available with 1-12 positions, MKDS 5 HV fixed PCB...

Terminal Blocks offer 90-

Featuring bent lead design for installation on PCBs, Barrier Strip Terminal Blocks provide EMI/RFI filtering of ac and dc power and control lines. They are rated at 20 A, and feature capacitance values from 2,500-5,200 pF. UL recognized and CSA approved for dc voltages, units come in 2 through 6 terminal sizes and are appropriate for filtering power supplies in telecommunications equipment,...

Terminal Connectors save PC board space.

Available in side stackable and polarized versions, CUF Series Female Connectors directly connect to comb edged male connector built on appropriate circuit board. With pole pitches of 5 and 10 mm, side-stackable units feature 2-16 poles, accommodating wire sizes from 12-30 AWG. Polarized versions come in 5-16 poles for 5 mm pitch and 2-8 poles for 10 mm pitch. Operating voltage for both types is...

Blocks enable mounting of T-slotted aluminum profiles.

Compatible with 6, 10, and 25 Series T-slotted aluminum profiles, Quarter-Turn Panel Mount Blocks come with either Ã-¼-20 or M6 vertically adjustable square nuts inserted in fiberglass-reinforced nylon body. Spacers are molded of same material in thicknesses of 2, 3, and 5 mm, enabling use of various panel thicknesses and locations. Blocks facilitate mounting of plastic panels in T-slotted...

Terminal Blocks feature low profile and angled wire entry.

With profile height of 8.5 mm and 55Ã-

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.