Adhesive Tapes

Adhesives are designed for wireless device assembly.

Pressure-sensitive adhesives offer electrically conductive, EMI shielding, electronically clean and optically clear tapes. ARclad 8314 and 8901 are 8 mil, double-sided, high-tack acrylic tapes for foams, rubbers and low surface energy materials. ARclad 7992 is a 5 mil, double-sided acrylic tape for wood, wallboard, ceramic tile, glass, painted surfaces, metals and plastics. Tapes conform to...

Read More »
Stacking Heat Sealer includes ActiveX interface.
Sealing Equipment

Stacking Heat Sealer includes ActiveX interface.

Stacking Heat Sealer is capable of sealing up to 50 96/384 shallow well plates; 35 384 deep well plates; and 17 1 to 2 ml deep well plates during unattended operation. It uses either REMP Peelable Sealing Foil or REMP Pierceable Sealing Foil, both of which are resistant to DMSO and can withstand storage temperatures between -80°C and 120°C. Cycle time is equivalent to 15 seconds per...

Read More »
Liquid Epoxy Encapsulant provides fast capillary flow.
Epoxies

Liquid Epoxy Encapsulant provides fast capillary flow.

Hysol® FP4549FC package level underfill is designed to offer excellent adhesion to flip-chip assemblies containing no-clean flux residues. Qualified to perform in 260°C reflow applications, FP4549FC heat cures in 30 minutes at 165°C, and meets JEDEC Level-3 260°C requirements. This high-purity, low-stress liquid epoxy encapsulant is designed for use in fine pitch...

Read More »
Splicing Tapes link siliconized substrate.
Adhesive Tapes

Splicing Tapes link siliconized substrate.

Silicone, double-faced ARclad 9024 and 9025 perform flying splices, manual splices, core starting and roll finishing splicing. Both are suitable for use with silicone coaters, laminators/coaters and other converting operations. Both resist high-temperatures. Highly visible red color allows operators to clearly identify splices during applications. Tapes provide quick tack and consistent caliper,...

Read More »
Repair Mortar fixes holes in concrete.
Fillers

Repair Mortar fixes holes in concrete.

General purpose Sealtight Meadow-Crete GPS makes patches l/4 in. and deeper for horizontal, vertical and overhead repairs and resurfacing of concrete. Mortar has creamy consistency, can be applied using trowel or wet spray process and is easily finished. It is polymer modified, shrinkage compensated, fiber reinforced, micro silica enhanced, and has corrosion inhibitors.

Read More »
Case Sealer features continuous operation design.
Sealing Equipment

Case Sealer features continuous operation design.

Model 336 hot melt adhesive case sealer is available with elevation ranging from 15 in. to 26 in. It features metering belt transfer that automatically times cases into flap tucker at speeds up to 45 cases per minute. Sealer tucks minor flaps, applies adhesive and plows major flaps closed. Rapid adjust hand cranks allow machine to accommodate case sizes from 8 in. long x 6 in. wide x 4 in. high...

Read More »
Foam Tapes are designed for use in high temperatures.
Adhesive Tapes

Foam Tapes are designed for use in high temperatures.

Duofoam® VJ Series polyethylene foam tapes are double coated with pressure sensitive acrylic adhesive providing excellent long-term aging, resistance to environmental extremes, and performance over a range of operating temperatures. Foam does not absorb water and provides good thermal insulation properties. Tapes are available in black and white, and are conformable to irregular surfaces.

Read More »
Adhesive Tapes

Foam Glazing & Muntin Mounting Tapes are pressure sensitive.

ARclad® pressure-sensitive foam glazing tapes offer cold flex, good sealing characteristics, and cyclic shock resistance. They require no cure time, apply and adhere without oozing, and require no cleanup. ARclad® 2000 glazing tapes offer high shear and internal strength. ARclad® 8231 double-faced glazing tape delivers permanent anchorage to foam. ARclad®...

Read More »
Epoxies

Epoxy features built-in cure indicator.

CHIPSHIELD 1455HD low-viscosity UV curable epoxy is designed to perform as chip coating both in smart cards and as a protective glob on PC surface-mounted chips. It is cured with long wave UV, 325-380 nm wavelength. Epoxy is light powder blue before cure, and faint rose to amber after cure, indicating cure has been completed. With Tg of 80° C and moisture resistance, chip is assured of...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers