Epoxies

Epoxy Adhesive provides semi-rigid bonds.

Tra-Bond 293-1T general purpose epoxy adhesive provides strong bonds to difficult-to-bond substrates, such as gold, nickel, silver, copper and brass. It can be cured at moderate temperatures from 60 to 75°C. Tra-Bond 293-1T thixotropic adhesive is available in pre-measured bipax kits or premixed and frozen syringes.

Read More »
Lens Bonding Adhesives have unlimited pot life.
Adhesives

Lens Bonding Adhesives have unlimited pot life.

Optically clear, low movement, low shrinkage lens assembly adhesives include UV blocking grades, which exhibit excellent adhesion to PVA, CR-39, and CAP, and provide UV/visible protection to 410 nm. Design eliminates birefringence. Low shrinkage, low outgassing opaque adhesives are available in viscosities from thin wicking grades to thixotropic gels. Adhesives cure when exposed to low/medium...

Read More »
UV Curable Epoxies provide durable bonds quickly.
Adhesives

UV Curable Epoxies provide durable bonds quickly.

Formulated to cure rapidly, epoxies produce slick, smooth, dry surfaces that provide bonding, sealing and protective coatings in seconds, and reach full strength in 1-24 hr. Cured epoxy bonds exhibit low shrinkage and outgassing properties and offer good solvent and temperature resistance. They adhere to glass, metal and wide variety of plastics. Surface treatment provides adhesion to some...

Read More »
Putty cures at room temperature
Putty

Putty cures at room temperature

Durabond(TM) 7032 1-component, metallic putty cures at room temperature to form machinable, stainless steel composite with high bond strength and excellent chemical, corrosion, and shock resistance. It has no harsh odors or outgassing, and does not contain flammable solvents. Durabond 7032 will not run or sag while applying. Putty repairs pumps, valves, fittings and equipment; rebuilds worn...

Read More »
Polyurethane Adhesive contains flourescent trace.
Adhesives

Polyurethane Adhesive contains flourescent trace.

Improved TRA-BOND 724-20 provides bond-line control for critical alignment applications. Pre-mixed and frozen polyurethane adhesive provides strong, resilient bonds to various substrates including aluminum, solder, nylon, mylar and steel. Adhesive strength is maintained even in cryogenic conditions. Polyurethane exhibits good dielectric properties, and offers multiple curing options, including...

Read More »
Adhesives

Water-Based Adhesives suit automotive assembly applications.

Environmentally friendly water-based adhesives work on porous substrates such as foams, cloth, felt, and insulation, and non-porous materials such as wood, plastic and metals. Products are available with fast-tack and foam tearing strength comparable to solvent based adhesives. Adhesives are fast setting for use in general upholstery, foam-to-foam, foam-to-fabric, or foam-to-wood bonding, and may...

Read More »
Epoxies

Epoxy Adhesives/Sealants are silicone-free.

EMCAST FIPG 1850 is curable by UV light in 325-380 nm range. Viscosity is rated at 60,000 cps, and its hardness A rating is 65. EMCAST FIPG 1851 is curable by UV light in 325-380 mn range. Viscosity is rated at 60,000 cps, and its hardness A rating is 80. Emcast FIPG 1852 acrylate based prepolymer is curable by UV light in the 325-380nm range or by heat. Viscosity ranges from 50,000-60,000 cps,...

Read More »
Encapsulant/Potting Material exhibits
Repair Compounds

Encapsulant/Potting Material exhibits

Ceramacast(TM) 510 aluminum oxide based, hydraulic-setting ceramic compound potting material can be used to encapsulate cartridge heaters and embed high temperature components to 3200Â-ºF. Supplied as dry powder, Ceramacast 510 is bonded using calcium aluminate and as-cast. Its dried density is 180 lbs/ft3, and it exhibits exceptional thermal conductivity and dielectric strength of 75-100...

Read More »
Epoxy Adhesive fixes electrical coils.
Epoxies

Epoxy Adhesive fixes electrical coils.

Tra-Bond CA20 thixotropic epoxy adhesive system is formulated for shorted turns, damaged end wire extensions, or other coil repair applications where high-fill, non-sag adhesive is needed. It provides high dielectric isolation and good mechanical strength. Readily mixed, handled, used, and cured at room temperature, Tra-Bond CA20 develops strong bonds to materials such as metals, glass, ceramics,...

Read More »
Case Sealer suits demanding applications.
Sealing Equipment

Case Sealer suits demanding applications.

OK Supertaper 1M seals both tops and bottoms of cases with tape. Standard features include stainless steel exterior finish and heavy-duty side belts with 1/4 hp motors that can handle cases up to 90 lbs. Four in. wide side belts handle heavy and bulging cases. OK Supertaper 1M features OK55 tape heads with open tape feed path.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers