Pressure Sensitive Adhesive meets medical device guidelines.
Adhesives

Pressure Sensitive Adhesive meets medical device guidelines.

Intended for medical devices where skin contact is possible, TM9616 consists of 1/16 in. white polyethylene foam, double-coated with acrylic-based, hypoallergenic, medical-grade adhesive. Adhesive is protected by semi-bleached kraft release liner with silicone release system on 2 sides. Product is formulated for sustained contact with human skin. Applications include ostomy mounts,...

Read More »
Rubber-Toughened Adhesives are suited for OEM assembly.
Adhesives

Rubber-Toughened Adhesives are suited for OEM assembly.

ZipGrip® adhesives consist of clear-drying cyanoacrylates that bond plastics, rubber, and metal; provide flexibility and impact resistance; and withstand service temperatures to 280°F. Able to attain fixture strength in seconds, adhesives reach functional strength in 60 min and full cure in 24 hr. ZipGrip HV1200 has 1,200 cps viscosity and 3,700 psi tensile shear strength, while...

Read More »
Printer Tapes are designed for low-light signage.
Adhesive Tapes

Printer Tapes are designed for low-light signage.

Used with GlobalMark(TM), PowerMark(TM), HandiMark®, and Labelizer® Plus products, reflective tapes are visible with flashlight or vehicle headlights and suited for low light conditions. Phosphorescent, Glow-In-The-Dark tapes glow for 10 hours and meet ISO, dIN and ASTM standards. Chemically-resistant tag stock meets OSHA 50 lb pull requirement and is suited for lockout and accident...

Read More »
Double-Sided Tapes suit touch screen assembly applications.
Adhesives

Double-Sided Tapes suit touch screen assembly applications.

ARclean® 90178 and 90176 are 0.0035 and 0.005 in. thick non-corrosive tapes that provide perimeter spacer bonding in resistive touch screen and other similar electronic devices. They utilize electronically-clean, acrylic acid-free adhesive, and have low outgassing of VOCs. Tapes offer resistance to aging with ability to withstand temperature and humidity extremes. Both have polyester film...

Read More »
Concrete Patch repairs potholes in 1 hr.
Cement

Concrete Patch repairs potholes in 1 hr.

Hy-Speed 500(TM) emergency repair cement becomes a concrete-hard mass ready for traffic in 1 hr. It expands as it sets, becoming permanent patch that exhibits 3x strength of concrete. Product requires users to add water, mix, then pour. It needs no priming, leveling, or troweling and comes in 5 gal pails.

Read More »
Epoxy Adhesive provides rapid cure time.
Epoxies

Epoxy Adhesive provides rapid cure time.

Thermally-conductive TRA-BOND 224-8 can cure in 4 hours at room temperature or as short as 3 min at 95°C. It offers 30 min work life and shelf life up to 1 year. Viscosity of 20,000 cp ensures that adhesive will flow into most small voids and creases. Combined with electrical insulator, product is suited for encapsulation, component staking, and sealing. Package options include BI-PAX and...

Read More »
Epoxies

Ceramic-Filled Epoxy protects parts from corrosion/wear.

Ceramic Coat® epoxy system is formulated to repair, rebuild, and protect surfaces subject to corrosion or wear, negating need for replacement parts. After reframing, damaged blades can be rebuilt to original specifications with trowelable CT 3000® and then protected with brushable Ceramic Coat 4000®. Applications include pump casings, impeller blades, suction plates, gate and...

Read More »
Ceramic Adhesive suits applications to 3,000°F.
Adhesives

Ceramic Adhesive suits applications to 3,000°F.

Ceramabond(TM) 552 consists of single-part, alumina-filled adhesive that adheres to ceramics and metals used in applications to 3,000°F. Dispensable adhesive is water-based, environmentally safe material that contains no VOCs. After setting at room temperature and curing at 200°F and 500°F for 2 hr, respectively, it resists acids, solvents, fuels, and molten metals. It exhibits...

Read More »
Adhesives

Die Attach Adhesive remains stable at high temperatures.

Hysol® QMI 550EC silver-filled, conductive adhesive bonds integrated circuits and components to advanced substrates such as PBGAs, CSPs, and array packages. It produces void-free bond line with interfacial adhesion to variety of organic and metal surfaces. Hydrophobic product can be cured in-line using Skip-Cure processing in just 10 seconds after bond line reaches 150°C. Hysol®...

Read More »
Wire Harness Tape reduces squeaks and resists abrasion.
Adhesive Tapes

Wire Harness Tape reduces squeaks and resists abrasion.

Tyco Polyken® 007 consists of non-woven polyester backing on black natural rubber adhesive that is single-coated, self-wound, and provides consistent unwind throughout roll. Conformable and abrasion-resistant product, non-corrosive to copper wire, measures 11 mil thick and Â-¾ in. wide and has 20 lb/in. tensile strength. Applications include spot taping, clip retention, or continuous...

Read More »

All Topics