Adhesive bonds high-temperature electrical components.
Adhesives

Adhesive bonds high-temperature electrical components.

Ceramacast(TM) 586 is a zirconium-silicate based, phosphate-bonded, chemically-setting ceramic compound suited for bonding and potting infrared heaters, gas igniters, and filters in applications to 2800°F. Product is supplied as powder and mixed with water to paste-like consistency. Pneumatically-dispensed adhesive provides 1-hr pot life and hardening time of 6-8 hr. Dielectric strength and...

Read More »
Splicing Film withstands 400°F for short periods.
Adhesive Tapes

Splicing Film withstands 400°F for short periods.

Scapa 512 pressure-sensitive splicing tape consists of polyester film, single-coated with silicone adhesive for use on silicone and other surfaces. Product can withstand prolonged exposure to temperatures as high as 350°F; for shorter periods of time, Scapa 512 withstands temperatures up to 400°F.

Read More »
Epoxies

Flexible Adhesive provides sag resistance.

Amber-colored, medium-viscosity LX30068 cures at room temperature, and offers heat cure option for applications where accelerated cure is desired. Rubber-like epoxy bonds difficult-to-bond materials in addition to traditional metals, plastics, and ceramics. It performs at high temperatures during thermal cycling and long-term exposures.

Read More »
Epoxy Adhesive produces clear bond lines.
Epoxies

Epoxy Adhesive produces clear bond lines.

Offering 55 min work life, UV-absorbing Araldite® AAY-8591 resin/HY-8591 hardener system cures after 60 min at 158°F, 20 min at 212°F, or 5 min at 302°F. With elevated temperature cure, it exhibits lap shear strength of ~2,200 psi and Shore hardness of 65D. Low-viscosity, easy-to-spread epoxy bonds glass to glass and metals to ceramics. It is suited for manufacturing...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Sealants are suited for window and door industries.
Sealants

Sealants are suited for window and door industries.

PURFECT GLAZE(TM) warm applied adhesive glazing sealants bond glass to window sashes or frames. Sealant technology utilizes polyurethane reactive hot-melt adhesives and allows users to wrap windows within 5 min. Once glass is bedded, products provide immediate handling strength. Sealants are available in 3 grades: PURFECT GLAZE G for general insulating glass (IG) applications, SA for special IG...

Read More »
One-Component Sealant offers no slump, non-sag properties.
Sealants

One-Component Sealant offers no slump, non-sag properties.

Bostik® 2175 FS environmentally-sound, 100% solids sealant meets demands of transportation industry. Based on silyl polyurethane sealant hybrid polymer technology, sealant is suited for overhead and vertical seam-sealing and gap-filling applications. Non-yellowing, paint-compatible formula adheres to aluminum, wood, and FRP. It is free of xylene, acetone, MEK, and similar solvents. At...

Read More »
Adhesive System provides thermal conductivity.
Adhesives

Adhesive System provides thermal conductivity.

Silicone-based TRA-CAST 813J01 bonds well to difficult substrates, exhibits low stress, and can cure at room temperatures. Soft and flexible material has medium viscosity prior to cure. Once hardened, adhesive can handle temperatures up to 260°C without reverting. It has low Tg and work life of over 1Â-½ hours. Typical applications include encapsulation of heat sinks, transistors, and...

Read More »
Thermally Conductive Adhesive features 1:1 mix ratio.
Adhesives

Thermally Conductive Adhesive features 1:1 mix ratio.

Two-component, electrically-isolating, EP21AO epoxy adhesive will adhere to similar and dissimilar substrates. Self-leveling paste is 100% reactive and does not contain solvents or volatiles. It has thermal conductivity of 10 BTU/in./ftÂ-²/hr/°F and dielectric strength greater than 400 V/mil. Available in pt, qt, gal, and 5-gal kits, product features Shore D hardness greater than 85,...

Read More »
Adhesive bonds thermocouples for high temperature uses.
Adhesives

Adhesive bonds thermocouples for high temperature uses.

Pyro-Putty® 2400 thermally conductive adhesive, sealant, and metal repair compound is suited for applications up to 2,000°F. Ceramic and stainless steel-filled paste bonds, seals, and repairs defects up to 3/8 in. cross-section in cast iron, steel, and stainless steel components. Single-part, thermally shock-resistant product is water-based and contains no VOCs. It sets at room temperature...

Read More »
Joining System joins PVDF acid waste pipe and fittings.
Sealing Equipment

Joining System joins PVDF acid waste pipe and fittings.

Electrofusion joining system joins polyvinylidene fluoride acid waste pipe and fittings from 1½-6 in. using Rionfuse electrofusion processor built into shock-resistant, splash-proof case. System utilizes fusion coil made from heavy-duty stainless steel coil wire which can be rotated 360° in socket to aid in installation. Able to be interfaced with PC, product ensures leak-free joints and...

Read More »

All Topics