Epoxies

Cryogenic Epoxy Adhesive cures at room temperature.

Featuring 1:1 non-critical mix ratio by weight or volume, 2-component Supreme 11F adheres to metals, ceramics, wood, glass, and most plastics and rubbers. Solidification occurs in 5-7 min after mixing, and full cure is achieved in 4-5 hrs. With service operating temperature of -100 to +250°F, product resists vibration, shock, and chemicals. It can be applied with gun applicator, flexible...

Read More »
Encapsulants

Dam and Fill Encapsulants meet lead-free requirements.

Hysol® FP4451TD(TM) and FP4800(TM) meet stringent JEDEC level testing requirements and enable wirebonded cavity-down SuperBGA® and Viper(TM) BGA packages. Suited for package level applications, Hysol FP4451TD offers aspect ratio of 0.70 height-to-width and enables dam heights greater than 1 mm. Self-leveling, liquid encapsulant, Hysol FP4800 withstands solder temperatures to...

Read More »
Sealants

Sealant suits high-temperature casings and manifolds.

Formulated by combining high-temperature resin with ceramic fibers and powders, Pyro-Putty(TM) 950 is used as gasketing compound for boilers, compressors, heat exchangers, furnaces, ovens, and exhaust manifolds up to 950°F. Product is resistant to chemical and steam attack, high pressure and vacuum atmospheres, and mechanical vibration and joint movement. Offered in 11 oz caulk gun...

Read More »
Shafts

Shaft Reducers/Extenders have Fairloc hub fastening system.

Comprised of 48 models, S52FCY Series is manufactured in inch and metric sizes to extend shafts to same or different diameters. Hub end of coupling features Fairloc® integral hub fastening system, which eliminates marred shafts. Made of 303 stainless steel, extenders offer zero backlash and are readily adjustable on shaft. They are designed to fit shafts from .120-.500 in. (3-12 mm) dia on...

Read More »
Adhesives

Adhesives can replace welding on galvanized metal.

Flex Welder FC methacrylate adhesive aids in assembly of products subject to flexing, shock, vibration, or variations in temperature up to 250°F. This 100% solids gel fills gaps up to 3/8 in. and will not run, drip, or sag. For service temperatures to 180°F, Dev-Thane 5 urethane adhesive also forms flexible bonds. Primerless, 2-part adhesive has 100% solids formulation and produces no VOC...

Read More »
Instant Adhesives suit industrial bonding and assembly.
Adhesives

Instant Adhesives suit industrial bonding and assembly.

Offering alternative to mechanical fastening systems, SikaLock product line comprises fast-acting, moisture-curing cyanoacrylates, anaerobic adhesives, and UV-curing adhesives designed to speed up mass production processes across range of manufacturing industries. From rubber, plastic, and polypropylene materials to delicate electronic assemblies, glass, and jewelery, SikaLock meets all types of...

Read More »
Adhesive Tape resists friction and wear.
Adhesive Tapes

Adhesive Tape resists friction and wear.

Chemically resistant, electrically insulating VICTREX® PEEK tape withstands continuous operating temperatures up to 428°F as well as higher temperatures for short durations. It resists wear over various ranges of pressure, velocity, temperature, and counterfacial roughness. Hydrolytically stable product can withstand over 109 rads of radiation exposure without embrittlement and comes...

Read More »
Adhesives

Adhesive bonds ceramic to metal at temperatures to 3,000°F.

Able to bond to ceramic, metal, and quartz substrates, Ceramabond(TM) 569 single-part, ceramic-filled paste cures by being heating at 200°F for 2 hr or drying at room temperature for 24 hr. It exhibits dielectric strength of 200 V/mil, volume resistivity of 109 ohm-cm, CTE of 4.2 in/in/°F, and torque strength of 6.0 lb-ft. Applied via brush, syringe, or automatic dispensing equipment,...

Read More »
Adhesives

UV-Curable Adhesive/Sealant has flexible formula.

Used for bonding and sealing, UV15X-5 single-component urethane elastomer withstands thermal cycling and mechanical shock. Its formulation exhibits abrasion resistance and forms chemical-resistant bonds between similar and dissimilar substrates. This 100% reactive product, which does not contain any solvents or volatiles, cures in thicknesses greater than 1/8 in. at room temperature upon exposure...

Read More »
Adhesives

High-Temp Transfer Adhesive is used for product assembly.

Formulated for high-temperature gasketing/sealing and general-purpose bonding, Unifilm U725 acrylic transfer adhesive suits thermal management applications. Product adheres to surfaces such as urethane foams, metals, and engineered plastics. Able to withstand environmental extremes and temperatures over 250Â-ºF, adhesive is supplied with clear, polyester film liner that removes in one piece...

Read More »

All Topics