Polyester Film Tape bonds to foam and gasket materials.
Adhesive Tapes

Polyester Film Tape bonds to foam and gasket materials.

Available in 44 and 60 in. roll widths, double-coated 3175M is suited for automotive, electronics, construction, graphic arts, medical, and general industrial applications. Rubber-based adhesive on exposed side bonds polyurethane and polyethylene foams, felt, rubber, sponge, cork, abrasive, and gasket materials. Liner side consists of rubber-based adhesive that bonds to most substrates at room...

Read More »
Structural Adhesive creates flexible bonds.
Adhesives

Structural Adhesive creates flexible bonds.

Suitable for securing honeycombed floor and ceiling panels in commercial airplanes, flame-retardant 10 Minute(TM) Epoxy FR passes federal 60 sec vertical burn test (14 CFR 25.853/25.885). Mixed as dispensed, epoxy features 80,000 cps viscosity, 10 min working time, 20 min fixture time, and functional cure time of 3 hr at 72°F. Epoxy features 25 pli peel strength, 10 ft-lb/in.Â-² impact...

Read More »
Adhesive Pads protect glass during shipping.
Adhesives

Adhesive Pads protect glass during shipping.

Klean-Stick(TM) Separator Pads feature removable pressure-sensitive adhesive that is dry to touch, resistant to 300°F, and can be removed without leaving residue. Adhering to glass, mirrors, and metal during transporting, packing, storage, and installation, pads set between glass pieces adsorb vibration, maintain position, and prevent breakage. Pads are supplied on kiss cut rolls or pads...

Read More »
Assembly Sealant provides instant adhesion.
Adhesives

Assembly Sealant provides instant adhesion.

Utilizing hot melt technology, HM-2510 combines crosslinked silicone sealant with instant green strength of pressure sensitive adhesive, meaning that parts can be moved immediately from one processing step to another. It offers aggressive adhesion to PVC, aluminum, painted and treated wood, paints, and plastics. Optimized for use with automated dispensing equipment, non-hazardous, low-odor...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Induction Sealer applies foil directly to container.
Sealing Equipment

Induction Sealer applies foil directly to container.

Capless induction sealer offers packagers sealing solution for applying foil barrier or protective seal when cap is not required. It may also be used when it is advantageous to seal container before applying cap. Able to seal variety of container shapes and sizes, product can be mounted vertically or horizontally and operates from 120 or 240 V. Waterless solution features solid-state construction...

Read More »
Bonding Adhesive holds up to 450 F.
Adhesives

Bonding Adhesive holds up to 450 F.

Bond-It 007 adheres to smooth, rough or porous surfaces. Curing in minutes at room temperature without odor, adhesive features consistency thick enough to hold parts together while drying without molds, fixtures, or clamps. There is no sagging or dripping following application. Adhesive is packaged in self mixing dispensing cartridges and attaches ceramics to metals, brake pads to metals, and...

Read More »
Switches

Industrial Networking Equipment suits harsh environments.

Designed for extreme temperatures from -40 to 185°F, EnviroNET(TM) NEMA4-compliant Industrial Ethernet-in-the-First-Mile and Outdoor-VoIP Solutions let network operators extend services to harsh indoor and outdoor environments where heating or cooling systems are unavailable or impractical. Enclosures protect sensitive network equipment against damaging elements such as high wind,...

Read More »
Chip Encapsulant endures bending and flexing at -20°C.
Encapsulants

Chip Encapsulant endures bending and flexing at -20°C.

DYMAX 9008 chip encapsulant forms transparent layer that protects components and leads from moisture, dust, and other contaminants. Coating cures in 10-30 seconds under 200-1,200 mW/cmÂ-² intensity lights, enabling thicknesses to 1.5 mm to cure in UV conveyor belts at speeds of 2-4 ft/min. Cure depths to ¼ in. are possible. Coating adheres to variety of surfaces including...

Read More »
Resins

DuPont to Produce New High-Performance Polymers Made with Renewable Resources

WILMINGTON, Del., June 27 / -- DuPont expects to begin production in 2007 of new high-performance thermoplastic resins and elastomer products made from two of its latest bio-based materials innovations. The products will be targeted for automotive, electrical/electronic and other industrial markets. Intermediates for DuPont(TM) Sorona® polymer and DuPont(TM) Hytrel® made with...

Read More »
Flux

Indium Corporation Features Reliability Program at Semicon West

Indium Corporation will highlight its Reliability Program at its exhibit at Semicon West on July 10-14 at the Moscone Center in San Francisco, CA. Indium's team of experts will be available at booth #8423 to answer questions and provide information. With the increasing demands for power and miniaturization driving thermal management issues as well as CSP Reliability, Indium Corporation is...

Read More »

All Topics