Coated Tape changes color when exposed to laser power.
Adhesive Tapes

Coated Tape changes color when exposed to laser power.

Offering label replacement for outer case secondary packaging, DataLase® CASEMARK Tape does not have any backing paper and does not require inks or ribbons. It changes from white to black upon exposure to low power CO2 laser. Apply-and-print technique enables information to be printed on tape after it has been applied to case. If tape is removed from carton after imaging has occurred, image...

Read More »
Silicone Elastomer suits optical and display applications.
Adhesives

Silicone Elastomer suits optical and display applications.

Featuring set-up time of 8-12 min at 75°F, room temperature cure MasterSil 415 one component silicone elastomer has dielectric strength of 500 V/mil and service temperature range of -185 to 400°F. Resistant to vibration, impact, and shock, it has Shore A hardness of 30, elongation of 400 at 75°F, and tensile strength of 325 psi. Compound can be applied on vertical surfaces...

Read More »
Silicone Material suits electronic packaging applications.
Encapsulants

Silicone Material suits electronic packaging applications.

Low outgassing, one-part material EPM-2411-2 glop-top is designed for encapsulation of chip packages in devices where outgassing-related contamination poses problem. Product exhibits low stress and wide operating temperature ranges characteristically associated with silicone-based materials. It is stored and shipped frozen in 3 and 30 cc syringes as well as 3 and 6 oz tubes.

Read More »
Lab-metal Repair Compounds Solve Patching Problems For Safe Manufacturer
Repair Compounds

Lab-metal Repair Compounds Solve Patching Problems For Safe Manufacturer

When a U.S. safe manufacturer / fabricator recently converted from liquid coating (spray paint) to powder coating, they faced one obstacle: the two-part epoxy based fillers used to cosmetically patch and fill their rough welds and seams failed in the heat of powder coating ovens. After successfully testing Lab-metal and Hi-Temp Lab-metal, one-part metal repair and patching compounds from Alvin...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Sealant targets pharmaceutical and medical applications.
Sealants

Sealant targets pharmaceutical and medical applications.

Extrusion coated onto various substrates such as film, foil, or paper, Allegro® M helps achieve clean peel. It seals to rigid cup or tray structures including HIPS, PVC, APET, PP, and HDPE. Allegro M helps lidding structures stand up to transport challenges, minimizing chance of compromise. Typical applications include unit-of-use liquid medications, diagnostic cartridges, pre-filled...

Read More »
Sealing Equipment

Capsugel Launches an Improved Laboratory -Scale Liquid Capsule Filling and Sealing (CFS) Machine

LONDON, October 9/ - Capsugel, the leading supplier of capsules for the pharmaceutical and dietary supplement industries, today announced the launch of the CFS1200, an improved version of its laboratory-scale Capsule Filling and Sealing system. This updated machine offers R&D laboratories several significant improvements over its predecessor, the CFS1000, which is currently used extensively by...

Read More »
Non-Tacky Pre-Preg Materials optimize molding throughput.
Resins

Non-Tacky Pre-Preg Materials optimize molding throughput.

Non-adhesive pre-preg thermoset composites (b-stage products) are dry to touch and can be customized to fit range of end-user requirements. Products do not require release film, enhancing storage, handling, and processing rates. Tight resin/substrate ratios ensure consisent reactivity. Available substrates include glass, cotton, paper, carbon fiber, and customer-specific substrates, while choice...

Read More »
Switches

Patton Launches Industrial-Ethernet and Hardened-Network Gear at ISA EXPO 2006

EtherBITS(TM) Serial Device Servers and EnviroNET(TM) NEMA4 Industrial-Network Solutions Will Take the Spotlight at ISA EXPO 2006 in Booth 2571 and During Patton's Thursday Press Conference GAITHERSBURG, Md., Oct. 10 /At ISA EXPO 2006 next week, Patton Electronics -- the leader in network-access, connectivity, and VoIP -- will showcase new solutions for the industrial-automation network: the...

Read More »
Sealing Equipment

SCA Packaging North America Brings Expertise Together

NA companies exhibiting together for the first time at PACK EXPO 2006 DeKalb, IL (September 20, 2006) - SCA Packaging North America will be exhibiting as a single, unified company for the first time at PACK EXPO International 2006 trade show, October 29 - November 2, McCormick Place Convention Center, Booth # S-1466. New developments in consumer, protective and temperature-assured packaging as...

Read More »
Epoxy Adhesive is serviceable at temperatures down to 4°K.
Epoxies

Epoxy Adhesive is serviceable at temperatures down to 4°K.

With 3-minute set-up time, EP51M produces bonds with 2,000+ psi shear strength that exhibits resistance to thermal cycling and chemicals. Bonded parts can be safely handled within 30 min. Product, suited for cryogenic applications, adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Insensitive to cleaning procedures, it can be used in electronic, electrical, computer,...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics