Resins

Sartomer's SMA 1000 Modifies Polybutadiene Terephthalate Melt Flow

EXTON, Pa., February 9, 2009 - Sartomer Company's plastics research and development team discovered a new use for its Styrene Maleic Anhydride (SMA®) resin. SMA 1000 can modify the melt-flow of polybutadiene terephthalate (PBT) in mixtures (in situ), enabling greater flexibility in part design. The new use may lead to thinner, more complex mold designs, more intricate flow paths, and fewer...

Read More »
Wrapping Machinery

New Stretch Wrap Line Introduced

Greenville, SC: Louis P. Batson Company recently introduced their newest product line...packaging and shipping supplies. These supplies include STEELFLEX Xtreme stretch films, stretch wrap machinery, cornerboards, custom-made bags and tape. STEELFLEX Xtreme is a 7-layer high performance cast stretch film. Manufactured with state-of-the-art 7-layer extrusion equipment, this film utilizes the...

Read More »
Resins

Polyamide 66 Resins withstand high-temperature applications.

Ultramid A3W2G10 and Ultramid A3W2G6, 50% and 30% glass reinforced, respectively, perform in automotive engine applications and in turbo charging systems for hot side charge air cooler end cap and ducting. High heat-stabilized polyamide 66 grades handle continuous use in temperatures of 180-190°C and short term exposure up to 230°C. They feature optimized long-term heat aging...

Read More »
Sealants

Ready-To-Use Coating/Sealer does not require any mixing.

Featuring deep-penetrating formula for concrete as well as wood, metal, and steel surfaces, epoxy floor sealer and coating No. 7300 is designed for use in industrial applications such as warehouses, production floors, as well as shop and garage floors. Heavy-duty product cures, seals, hardens, and dust-proofs floors and may also be specially formulated as non-slip surface coating. In addition to...

Read More »
Potting Compound withstands temperature extremes.
Adhesives

Potting Compound withstands temperature extremes.

With thermal conductivity of 25 BTU-in./hr-ft2-°F and volume resistivity of 1 x 1014 W cm, Type EP37-3FLFAN dielectric heat transfer adhesive works in temperature extremes, up to 250°F and down to 4K in cryogenic environments. Two-part thermal potting compound is formulated to cure at room temperatures and forms bonds that are resistant to shock, impact, thermal cycling, and chemicals.

Read More »
Ceramic Adhesive suits high temperature potting applications.
Adhesives

Ceramic Adhesive suits high temperature potting applications.

Magnesium oxide filled, water based, 2-part ceramic adhesive and coating system Ceramabond(TM) 672 can be used in assembly of high temperature catalytic converters for applications to 2,800°F. It exhibits volume resistivity of 109 W-cm, dielectric strength of 255 V/mil, tensile shear strength of 500 psi, and torque strength of 21.6 ft-lb. Adhesive contains no VOCs, does not outgas in ultra...

Read More »
Adhesives

Henkel Industrial Adhesives Achieve GreenGuard® Certifications

January 27, 2009 Bridgewater, NJ - In a move to further support its customers in the construction and woodworking markets, Henkel Corporation has obtained GreenGuard® certifications for selected products within each of its woodworking product brands. The certified products include a selection of wood glues and contact cements, as well as low VOC and green diamond canister products. "Air...

Read More »
Thermoset Composites withstand tough environments.
Resins

Thermoset Composites withstand tough environments.

Comprised of 4 grades, NP193 series features blend of aramid fabric substrates impregnated with various resins. While NP193E uses high-temperature epoxy resin for wear resistance, NP193M uses melamine resin for corrosion resistance. Use of high-temperature phenolic resin system with woven aramid fiber/glass fabric imbues NP193P with mechanical strength, while NP193PM combines high-temperature...

Read More »
Adhesives

Silicone Adhesives are designed for use on medical devices.

With ability to cure within 30 sec on exposure to suitable UV/visible light source, Loctite® 5055(TM), 5056(TM), and 5240(TM) eliminate part racking and allow immediate quality control testing. Silicones demonstrate tear strengths in excess of 50 lb/in. Loctite® 5055(TM) offers adhesion to polycarbonate and tensile strengths of nearly 1,500 psi, while Loctite® 5056(TM) offers...

Read More »
Resins

Hybrid Resin optimizes finish on leather products.

Hybrid resin RH-6675 is used when cold crack, flex, and print retention properties are required on leather. It features high mechanical stability, allowing for application via roller coat or flow coat machines, and ensuring resistance to print cut-through during high-temperature printing. Aliphatic polyurethane/acrylic dispersion is TEA and formaldehyde free, has low VOCs, and contains no...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers