Additives

Prepolymers suit industrial adhesive formulations.

Formulated without plasticizers, SPUR+ 3100HM and SPUR+ 3200HM high modulus, low viscosity prepolymers contain no free isocyanates, and are suited for use as binding agents in structural adhesive formulations. When cured alone, SPUR+ 3100HM provides tensile strength of 450 psi and Shore A hardness of 40, while SPUR+ 3200HM offers 1,000 psi tensile strength with Shore A hardness of 60. Shelf life...

Read More »
Adhesives

Silicone Adhesive offers controlled volatility.

Suited for use in close proximity to sensitive electronic and electrical devices, type SE 1720 CV silicone adhesive starts adhesion to polybuthylene terephthalate (PBT) substrates in 5 min with full adhesion in 30 min at 80°C. Adhesive also suits automotive applications such as case sealing and attaching electronic components for underhood controllers; chassis and brake applications such as...

Read More »
Resins

Photopolymer Materials simulate polypropylene.

Available in 2 kg cartridges, Durus(TM) FullCure® Materials support Eden250(TM) and Eden260(TM) office machines. DurusWhite FullCure430 gives white transparent look and feel of final products made of polypropylene, while also simulating strength of polypropylene. Material features Izod Notched Impact of 44.22 J/m, elongation at break of 44.2%, and modulus of elasticity of 1,135 MPa. It...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Epoxy Grout is shippable as non-hazardous product.
Grout

Epoxy Grout is shippable as non-hazardous product.

Available in pre-measured and proportioned kit sizes, Ship Safe Standard V-100 contains no regulated compounds according to USA, Canadian, and EU transportation agencies. Being free from hazardous material regulations eliminates fees associated with shipping hazardous classified epoxies. Product comes in 11 lb kit yielding 181.5 cu-in., 22 lb kit yielding 363.0 cu-in., and 55 lb kit yielding...

Read More »
Adhesives

Optical Adhesive features refractive index of 1.46.

Providing optimal bond when using plastic-to-plastic or plastic-to-glass substrates, NOA 84 cures by UV light with max absorption from 320-400 nm and visible light between 400-450 nm. Clear, colorless, liquid photopolymer adheres to CR-39, polarized film, Delrin®, nylon, cellulose acetate butyrate, polycarbonate, acrylics, and glass. Use of one-component, 100% solids adhesive eliminates...

Read More »
Re-Enterable Gel protects electrical enclosure contents.
Sealants

Re-Enterable Gel protects electrical enclosure contents.

Supplied in safe and self-contained bag, GELSEAL is capable of transforming standard electrical enclosures up to and beyond IP68 rating while offering re-enterabilty and protection against water, moisture, dust, and dirt. Non-toxic gel system, designed for facilitated pouring as well as optimal adhesion and dielectric properties, is suited for encapsulating, sealing, potting, insulating, and...

Read More »
Rectifiers and Diodes

Dow Corning Electronics Launches Optimized Manufacturing Process Program for Cost-Competitive LED Overmolding

Equipment Partnership Program Streamlines the Integration of LED Production Processes Using Dow Corning's Silicone Materials MIDLAND, Mich., Sept. 22 -- Dow Corning Electronics' LED materials group today announced it has launched an Optimized Manufacturing Process" program, partnering with capital equipment providers to develop integrated light-emitting diode (LED) overmolding processes designed...

Read More »
Structural Methacrylate Adhesive produces clear bond line.
Adhesives

Structural Methacrylate Adhesive produces clear bond line.

With mixed viscosity of 22,000 cps, Clear Welder(TM) two-part adhesive is formulated to produce clear bond line on various plastics including acrylics, PMMA, FRP, ABS, PVC, and PETG. It requires little or no surface preparation, has typical hardness of 82 Shore D, and withstands service temperatures from -67 to 200°F. Available in 380 mL co-axial cartridges, unit is mixed as dispensed in...

Read More »
Adhesive Tapes

Finishing Compound and Tape protect interior walls from mold.

ProRoc® Moisture and Mold Resistant Setting Compound is formulated for use in all stages of finishing, including filling joints, embedding fiberglass mesh joint tape, and concealing joints, fasteners, and trim accessories. Plaster-based product can be sanded when dry and is mold-resistant. Mold-X10 Mold Resistant Mesh Tape is fiberglass mesh that is self-adhesive. Complimenting...

Read More »

All Topics