Adhesive/Sealant contains no solvents or diluents.
Adhesives

Adhesive/Sealant contains no solvents or diluents.

Storage-stable, one component, low viscosity system, EP19HT adhesive/sealant, impregnant, and liner features viscosity of 500-600 cps at 75°F and cures readily at elevated temperatures to tough, chemically resistant thermoset plastic. Recommended cure is 1 h at 250°F, while shorter cures can be achieved at temperatures between 325-350°F. Exhibiting minimal shrinkage upon cure,...

Read More »
Adhesives

Dow Corning to Exhibit Innovative PSA and Release Coating Solutions at APFE 2009

March 23, 2009 MIDLAND, MICHIGAN, USA: Dow Corning Corporation will exhibit its innovative silicone pressure sensitive adhesives and release coating solutions at the 4th International Adhesive Tape, Protective Films, and Label Expo (APFE) in Shanghai, China, this May. Visitors to Dow Corning's Booth T19 will learn about new technologies such as high-performance PSAs for Asia's high-end electronic...

Read More »
Halogen-Free Adhesives suit assembly of handheld electronics.
Epoxies

Halogen-Free Adhesives suit assembly of handheld electronics.

Loctite® line of halogen-free adhesives and sealants are formulated to contain less than 900 ppm bromine and chlorine as well as 1,500 ppm total halogens. Product range includes cyanoacrylates, light cure cyanoacrylates, epoxies, urethanes, UV acrylics, silicones, hot melts, two-part acrylics, and anaerobics used for bonding, sealing, gasketing, and mounting range of components. All meet...

Read More »
Epoxies

Halogen-Free Adhesives meet IPC IEC #61249-2-21 requirements.

Formulated to contain less than 900 ppm bromine and chlorine, and 1,500 ppm total halogens, Loctite® adhesives are designed for assembly of handheld electronics such as cell phones, PDAs, notebook/laptop computers, and hard disk drives. Adhesives help eliminate environmental concerns and create green products.

Read More »
Adhesive can withstand temperature above 600°F.
Adhesives

Adhesive can withstand temperature above 600°F.

Offering tensile shear strength of 2,100 psi, high temperature, heat-curing nitrile-phenolic adhesive, Aremco-Bond(TM) 570 bonds copper nozzles to ceramic insulators in oxy/acetylene welding torches. It has coefficient of thermal expansion at 48 x 10-6 in/in/°F and viscosity of 35,000 cP at room temperature. Thermal shock, chemical corrosion and water immersion resistant black pigmented...

Read More »
Color Masterbatches target wire and cable industry.
Additives

Color Masterbatches target wire and cable industry.

Suited for coloring complex melt processable fluoropolymer resins used as plenum space jacketing materials, MPFP Color Masterbatches come in 10 color-coding formulations matched to Munsell and RAL standards. Products are available in FEP and PVDF resin systems and are expandable to include other MPFP resins as needed. They maintain inherent flame retardancy and low smoke emissions that allow...

Read More »
BASF Elastollan® TPU Adhesive Receives NSF Standard 61 Approval
Adhesives

BASF Elastollan® TPU Adhesive Receives NSF Standard 61 Approval

WYANDOTTE, MI, March 24, 2009 - BASF, the first thermoplastic polyurethanes (TPU) manufacturer to receive the NSF Standard 61 approval for its Elastollan® TPU for CIPP (cured-in-place pipe) applications used for trenchless infrastructure repairs, is also the first to receive the approval for Elastollan® ET 3685-11 TPU adhesive for CIPP. This new innovation will open the doors for...

Read More »
Additives

Dow Corning to Feature Silicone Solutions at the European Coatings Show

Date: March 12, 2009 MIDLAND, MICHIGAN, USA: Dow Corning Corporation, a leading supplier of silicone solutions, will feature innovations and products from its coatings and construction chemicals industry segments at the European Coatings Show, March 31-April 2 in Nuremberg, Germany. At the European Coatings Show, Dow Corning will offer: o Resources to design for versatility: Dow Corning offers...

Read More »
Sonobond Ultrasonics Will Exhibit Its Environmentally-Friendly, Cost-Effective Assembly Machines at Techtextil North America 2009 in Las Vegas
Sealing Equipment

Sonobond Ultrasonics Will Exhibit Its Environmentally-Friendly, Cost-Effective Assembly Machines at Techtextil North America 2009 in Las Vegas

The SeamMaster(TM) High Profile Ultrasonic Bonder and the handheld SureCut(TM) HC35 Cutter/Sealer are ideal for nonwoven and synthetic fabric applications. Both units will be on display at Booth #347 in the Sands Expo and Convention Center, April 21-23. WEST CHESTER, Pennsylvania, March 19, 2009-Sonobond Ultrasonics announced today that it will be demonstrating some of its ultrasonic assembly...

Read More »
Pressure Sensitive Adhesive is moisture and blush resistant.
Adhesives

Pressure Sensitive Adhesive is moisture and blush resistant.

Suited for applications that require moisture- and blush-resistance, Covinax® 462 permanent pressure sensitive adhesive withstands UV, weather, and outside exposure without yellowing or water damage. Clear, styrene-acrylic copolymer supports direct coating and transfer processes as well as temperatures to 150°C. Characteristics include 2.50 lb peel adhesion strength (180° peel...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers