Silicone Gel offers refractive index of 1.40.
Encapsulants

Silicone Gel offers refractive index of 1.40.

Providing protection from mechanical shock, optically clear LS-3140 is suited for use as encapsulating, embedding, or potting compound for environmental protection of electronic assemblies. Low outgassing gel handles stress during thermal cycling without cracking or delamination. To meet multitude of processing requirements, LS-3140 cures at room temperature, or cure can be accelerated with heat....

Read More »
Revolutionary Polyethylene Adhesive Requires No Pretreatment
Adhesives

Revolutionary Polyethylene Adhesive Requires No Pretreatment

Master Bond MB514 polyethylene adhesive etches away at the bonding challenges presented by non-polar and low energy polyolefin surfaces. Typically, a pretreatment stage, which may include flame treatment, etching or roughening, is required before being able to bond polyolefin substrates. Specially formulated to eliminate this time consuming stage, the MB514 polyolefin based hot melt is...

Read More »
Label Doming Done Right
Dispensers

Label Doming Done Right

Fluid Research® Corporation (www.fluidresearch.com) offers solutions for dispensing optically clear single and dual component materials accurately. Domed labels are printed or embossed labels encapsulated in a thick resin coating - generally optically clear. Traditionally associated with high-end consumer goods, they are becoming common in medical devices, home appliances and cars, as well...

Read More »
Film Compound is suited for compostable bag production.
Miscellaneous Film

Film Compound is suited for compostable bag production.

Pelletized mineral-containing BioTuf 976 film compound is based on blend of biodegradable resins, including aliphatic/aromatic co-polyester. Designed to be extruded and converted on standard low density PE or grooved-feed HMW-HDPE processing equipment, compound produces films with physical properties similar to linear-low density polyethylene.

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Mounting Tape provides 1.4 W/mK of thermal conductivity.
Adhesive Tapes

Mounting Tape provides 1.4 W/mK of thermal conductivity.

Featuring thermal impedance of just 208°C-mm2/W, double-sided adhesive tape Keratherm® KL 90 consists of ceramic-filled acrylic adhesive film that provides bonding properties, and replaces use of mechanical fasteners. Silicone-free tape is 0.300 mm thick and is supplied on 400 mm wide rolls, while custom die-cut shapes are also available. Fiberglass-reinforced version KL 91 is...

Read More »
Adhesive has thermal conductivity of 2.2 W/m-°K.
Adhesives

Adhesive has thermal conductivity of 2.2 W/m-°K.

Offering volume resistivity of less than 0.0008 W-cm at room temperature, Aremco-Bond(TM) 556-LV features continuous operating temperature range at 340°F, intermittent use temperature of 375°F, tensile shear strength at 1,100 psi, Shore D hardness of 84, and viscosity range between 4,000-6,000 cP. It mixes in 100:4 ratio by weight, and sets at room temperature in 24 hr or can be heat...

Read More »
Underfill combines optimal flow, cure, and THB performance.
Adhesives

Underfill combines optimal flow, cure, and THB performance.

Hysol® UF3800(TM) exhibits lack of need for substrate pre-heat that, combined with room temperature fast flow and low-temperature curing properties, helps manufacturers improve throughput rates. Designed for use with CSP and BGA devices, halogen-free underfill has reworkable nature and offers stable electrical performance under temperature humidity bias (THB). Solution is compatible with...

Read More »
Gasketing Tapes create seal between 2 surfaces.
Adhesive Tapes

Gasketing Tapes create seal between 2 surfaces.

Industrial Gasketing foam tape, available in urethane, neoprene, felt, cork, Gore-tex, self-adhesive, and non-adhesive materials, are used to create seal between 2 surfaces. Product has adhesive on one side and is soft enough to conform to other surface when pressed down. Some products may also be used as anti-skid and anti-scratch pads, and all versions can be cut to shape. Printing and tape...

Read More »
Grease

Lubricants and Sealants are offered with 7 oz plungers.

OC Five Paste and OC Seven Grease are available with plungers that facilitate precise application and provide leak-tight seals for cylinder threads, valves, regulators, o-rings, gaskets, and more. Both products are suitable for use in critical applications, where compatibility with oxygen, resistance to aggressive chemicals, and service failure cannot be tolerated. Their properties remain...

Read More »
Adhesives

Hot Melt Adhesive bonds carpet tack strips.

Suitable for use with HB 220 Hot Melt Glue Gun, Series UX 8012 creates non-toxic bond between carpet tack or metal clips and finished concrete, fiber cement backer, or wood before stretching carpet over floor. One inch glue strip is used for each 4 ft of carpet tack or metal strip. With open time of 40 sec, adhesive must be applied at 390°F to achieve max bond strength. Product dries firm...

Read More »

All Topics