Cement

Sto Corp. Expands Stucco System Warranty by Exclusive Joint Program with Structa Wire Corp.

ATLANTA - (August 7, 2009) Sto Corp., the innovative world leader in cladding, coating, and restoration systems, has announced an exclusive joint warranty program with Structa Wire Corp., a British Columbia manufacturer of welded wire products for the lath and plaster industry. Key Structa Wire products can now be covered in a StoPowerwall Stucco System warranty, which further extends Sto's...

Read More »
Adhesives

Padding Adhesive accelerates bookbinding operations.

Used for bindery operation, Blackjack Quick-dry Padding Adhesive suits printers who require accelerated cure times or want to apply just one coat of adhesive. Soft tear solution, characterized with optimal solids content and minimal water is recommended for many types of paper, from cardboard to tissue. White solution dries clear and is suited for tabbing, bookbinding, and interleaving carbon.

Read More »
Fillers

Reinforcing Agent broadens applications for polypropylene.

Designed to meet needs of automotive and appliance industries, Hyperform HPR-803 replaces high loadings of heavy mineral fillers, such as talc, while delivering balance of stiffness and impact strength. Product also offers high heat deflection temperatures and comparable surface finish to talc-filled compounds that cannot be achieved with chopped glass fiber reinforcement.

Read More »
Adhesives

Adhesives and Cements meet EPA VOC regulations.

Silaprene brand Low Volatile Content contact adhesives and cements, compliant with latest EPA VOC regulations, contain less than 250 g/L of VOCs. Product performance is maintained, making adhesives and cements suitable for use in transportation, assembly, foam and furniture, HVAC, recreational vehicles, and marine industries.

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Adhesive Tapes

FLEXcon Transfer Tapes Now Available in Three Widths Faster Service, Lower Cost and Less Waste

FLEXmount® transfer tapes from FLEXcon are now available in 48-, 54- and 60- inch widths to alleviate off-cut charges and provide faster service. Widths are easily paired with those of intended substrates and FLEXcon offers all FLEXmount® adhesives with a choice of a 60-lb. or 84-lb. liner to aid in the conversion process. Some of the featured pressure-sensitive adhesives include...

Read More »
Syringe Filler simultaneously fills 2 syringes in 2 sec.
Filling Machinery

Syringe Filler simultaneously fills 2 syringes in 2 sec.

Featuring individual, automatic shut-off sensors, Tridak Model 1100 allows filling of materials through tip of syringe allowing syringes to be filled with plunger intact. Adjustable-level, dual photo-sensors automatically detect when syringe plungers reach their full position, and automatically shuts off filling cycle. Product utilizes disposable fluid path technology ensuring contaminate-free...

Read More »
Glass-Filled Polyamide meets flame retardance requirements.
Resins

Glass-Filled Polyamide meets flame retardance requirements.

Providing alternative to halogenated flame retardant formulations while meeting requirements for flame retardance, Chemlon® 225 GVNH consists of 25% glass fiber-reinforced polyamide 6 with UL 94 flammability listing of V0 at thicknesses down to 0.8 mm. Comparative tracking index of 600 V provides electrical performance required for device housings, circuit breakers, charge covers, and...

Read More »
Resins

Bio-Based Composites contribute to sustainable products.

LNP(TM) Thermocomp(TM) specialty compounds are bio-based materials that use curau fiber and wood flour natural reinforcements. Comprised of polyamide-6 nylon reinforced with up to 20% curau fiber, LNP Thermocomp PX07444 can potentially be substituted for glass-filled nylon in specific applications. LNP Thermocomp MX07442 is polypropylene (PP) reinforced with 30% wood flour. Aimed at replacing...

Read More »
Polycarbonate Resin targets electrical applications.
Resins

Polycarbonate Resin targets electrical applications.

Designed to meet UL 94 5VA at 3 mm thickness, Makrolon® FR7087 offers appearance of glass combined with impact strength and moldability of Makrolon polycarbonate. Clear thermoplastic product offers close to 90% light transmission at 3 mm while having about 1% haze. Selecting materials that meet UL 94 5VA can potentially eliminate need to electrically isolate components from...

Read More »
Resins

Polycarbonate Blend Resin targets automotive applications.

Offering replacement for styrene maleic-anhydride engineering resins that are discontinued, Bayblend® T88 GF-10 glass fiber-reinforced PC/blend resin offers same shrink rate range, allowing OEMs to continue to use existing tooling for automotive interior applications, such as instrument panel retainers and center consoles. Material provides adhesion to polyurethane foams and offers low VOC...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics