New Valves Products

Proportional Valves with integrated bus interfaces.

Models 4WRAF, 4WREF and 4-, 5-WRZF proportional valves are available with Profibus DP and CAN-BUS with DS 408 CANopen protocol bus connections. They also have separate connector for power supply and bus connection. Bus allows command value, control, and status words to transferred, and it supports 4 quadrant ramp generator, overlap compensation, and zero-point correction functions.

Solid Surface Sinks come with electronic faucets.

Solid-surface SloanStone sinks can be combined with any OptimaÃ-® Electronic Faucet to provide practical and aesthetically pleasing lavatories. Sinks withstand heat, stains, and chemical damage; are available in range of colors; and are easy to maintain. Sensor-operated faucets available include models EAF 100 and 150; ETF 610, 600, and 80; and EBF 615, 650, 187, and 85. Applications include...

Pinch Valves handle aggressive, particulate-laden liquids.

Pinch valves offer inertness similar to isolation valves with straighter, no-clog flow path. They are available in normally closed or normally open position or in 3-way configuration for fluid switching. Valves accommodate tubing from .010 to .875 in. ID. They aid in purging waste lines containing aggressive, particulate-laden solvents, corrosives, reagents, or other liquids.

Safety Relief System fits cryogenic storage tanks.

Figure 790 Cryotree Assembly includes safety relief valves, full flow diverting valve, rupture discs, bleed valves and related piping. It is designed for stationary cryogenic storage tanks, and eliminates need to shut down and evacuate tank to service valves and rupture discs. Assembly comes in 3/4, 1, and 1 1/2 in. sizes and is suitable for pressures to 400 psig and temperatures from cryogenic...

How to Reduce Costs for Plastic Caps, Closures and Other Packaging Products

Check out this white paper to read about the six questions to consider before selecting an injection molder for your packaging application.

Flow Control Valve has stepping motor actuator.

Co-axÃ-® flow control valve has solid-state ultrasonic position transducer with closed-loop control and stepping motor for control of fluids and gases at pressures up to 400 bar. Pressure balanced valve allows use of smaller, lighter electric stepping motors, reducing energy consumption, while decreasing response time. Valve is available with body for inline installation, or cartridge for...

Valves and Actuators fit into bus networks.

Line of modulating valve packages and automated on-off valves can be integrated with control valves and other devices on bus network. Valve line includes: Jamesbury and Neles screwed-end ball valves, flanged ball valves, high-performance butterfly valves, rotary control valves and special and severe service valves and accessories. Actuator line includes Jamesbury, Neles, and Valvcon actuators.

Valve provides pressure and temperature control.

AeroTemp steam conditioning valve combines steam PRV with spray water atomization technology. It provdies bubble-tight, zero leakage shut-off with metal-to metal seat. Valve is offered from 2 in. inlet sizes up to 32 in. outlet sizes with pressure ratings from 150 through 4500 ANSI Class.

Foot Control Valve suits flows up to 80 gpm.

FC10-800 high-pressure water jet foot control valve is rated for pressures up to 10,000 psi. Pedal design includes latch to prevent accidental actuation, and allows operator to dump pressure almost instantly by rocking pedal forward. Dump ports on both sides help valve maintain stability when pressure is dumped. Disposable cartridge seal can be removed and replaced in less than 60 seconds.

Ball Valve provides process control.

OBV is a 1000 psi W.O.G full-port, 3-piece process control valve made from 316 stainless steel. Manufactured of ASTM-A351-CF8m body, ball and cap, valve is available with or without locking handles in 1/4 through 1 in. NPT. Thrust washers and packaging are PTFE.

Flow Divider Cartridge diverts excess flow.

FPC 16 three-port pressure compensated priority divider cartridge provides pressure compensated flow to priority port. It bypasses excess flow to tank or other work functions. Bypass or excess flow port can be plugged. In applications where bypass flow is used for additional work, priority flow is unaffected by pressure changes in bypass circuit. Valve operating pressure is 3,000 psi max....

Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission

Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.