Aquatrol's Safety Valves meet CE standards.
Aquatrol's Series 560 and 740 Safety Valves provides oxygen cleaning, various connections like tri-clover and polishing to Ra standards. These valves come with dual-lapping process that creates seat tightness for all metal to metal seated valves. Units can be packaged for cryogenic service.
Read More »
Low Cost One-Way Valve for Specific Flow Rate and Pressure
This low cost accessory has been designed and constructed to pass a maximum of 7.5 litres/min and 0.5 bar pressure. Other versions of 1bar and above are also available. Designated “PurgeGate®”, this nifty, hi-tech item has applications in both fluid and gas control. Its small size and low weight makes it valuable for small liquid dispensing machines, as well as large ones with multiple...
Read More »
Low Cost One-Way Valve for Specific Flow Rate and Pressure
This low cost accessory has been designed and constructed to pass a maximum of 7.5 litres/min and 0.5 bar pressure. Other versions of 1bar and above are also available. Designated “PurgeGate®”, this nifty, hi-tech item has applications in both fluid and gas control. Its small size and low weight makes it valuable for small liquid dispensing machines, as well as large ones with multiple...
Read More »
Matco-Norca Expands Industrial Products Line
Company Offers Full Selection of Industrial Grade Stainless Steel & Carbon Steel Valves & Fittings/Nipples Brewster, NY, August 21, 2017 – Matco-Norca has expanded its line of industrial grade products with the addition of stainless steel and carbon steel valve offerings as well as stainless steel fittings and nipples. Industrial products from Matco-Norca also include actuated direct mount ball...
Read More »
A Reference Guide To Frequency Conversion Power Supplies For Industrial Applications
The purpose of this guide is to assist contractors and purchasing agents charged with writing specifications for, and/or procuring, frequency converters.
Read More »
Matco-Norca Expands Industrial Products Line
Company Offers Full Selection of Industrial Grade Stainless Steel & Carbon Steel Valves & Fittings/Nipples Brewster, NY, August 21, 2017 – Matco-Norca has expanded its line of industrial grade products with the addition of stainless steel and carbon steel valve offerings as well as stainless steel fittings and nipples. Industrial products from Matco-Norca also include actuated direct mount ball...
Read More »
PURGENVENT™ Air Venting Valves feature built in Purge Valve.
PURGENVENT™ Air Venting Valves are offered in Manual (7910MAV), Automatic (7900AAV), and Inline (7950ILV) models. Units are designed for removing excess air from sprinkler pipes. The 7910MAV valve is ½ in. ball valve with integral strainer and check valve. The 7900AAV valve comes with integral isolation valve, strainer, purge valve and automatic air vent and. 7950ILV uses inline air/water...
Read More »
PURGENVENT⢠Air Venting Valves feature built in Purge Valve.
PURGENVENT™ Air Venting Valves are offered in Manual (7910MAV), Automatic (7900AAV), and Inline (7950ILV) models. Units are designed for removing excess air from sprinkler pipes. The 7910MAV valve is ½ in. ball valve with integral strainer and check valve. The 7900AAV valve comes with integral isolation valve, strainer, purge valve and automatic air vent and. 7950ILV uses inline air/water...
Read More »
RAVE Valves offer effortless operation to air sampling canisters.
Restek Air Valve Excellence Valves are used for 3.2 L, 6 L, and 15 L Entech air sampling canisters. Designed to provide more than 15,000 cycles, units feature W-type seats that are resistant to damage. Offering full closure with a quick twist of the fingers (only 10 in-lb), units are leak-tested with helium to 1×10-6 mL/sec.
Read More »
RAVE Valves offer effortless operation to air sampling canisters.
Restek Air Valve Excellence Valves are used for 3.2 L, 6 L, and 15 L Entech air sampling canisters. Designed to provide more than 15,000 cycles, units feature W-type seats that are resistant to damage. Offering full closure with a quick twist of the fingers (only 10 in-lb), units are leak-tested with helium to 1×10-6 mL/sec.
Read More »
4-Port & 6-Port Selectors Join the Beswick Family of Selector, Mixing Diverting, and On/Off valves. A Great Endeavor
Approximately “Four score and seven months ago…” (time flies when you are working in high technology product development) Beswick introduced the smallest 10-32 UNF threaded ball valve in the world. Soon after that, our mixing/diverting model (conceived in liberty) took home “The Best New Product” award in 2011. A few years later, we created a larger ¼-28 UNF threaded on/off ball valve...
Read More »
Delivery Equipment That Really Delivers
Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.
Read More »
