New Valves Products

Subminiature Solenoid Valve has in-line barbed fittings.

Available at either 3.5 or 0.9 W, SERIES 58 subminiature 2-way, normally closed valve measures 2 x 1 x 5/8 in. Max operating pressure is 300 psi, burst pressure is 1,500 psi, operating temperature range is -5 to 122Ã-

Valves resist corrosion, contamination, and clogging.

Diaphragm Isolated Solenoid Valves Series SV 51 and SV 73 use flexible diaphragms to isolate operating parts from fluid being handled, eliminating metal-to-fluid contact. Available in 2-way NC and NO as well as 3-way configurations, seal materials include Viton, EPDM and TeflonÃ-®. Standard voltages are 24 Vdc and 115 Vac/60 Hz, while pressures range from vacuum to 100 psi and flow rates up...

Automated Ball Valves feature all-plastic construction.

Rated for full 225 psi, fully repairable EA Series has true union design and incorporates 110 Vac electric actuator with output torque of 140 lb-in. Built-in, automatic resetting thermal overload protector prevents motor burnout, and 25% duty cycle motor drives valve through permanently lubricated gear train. Featuring EPDM seals and PTFE seats, PVC valve is available in sizes for Ã-½-2 in....

Drum-top Dispenser helps control spills.

Designed for dispensing material from 55 gal steel tight-head drums outfitted with pump, Drip Sentinel(TM) Drum-Top Workstation(TM) helps save liquids by catching and redirecting them back into drum. Made of non-corrosive and chemically resistant polyethylene, product features molded-in raised rim to reduce splashes and spills, and raised ribs that provide clean, flat area to place containers to...

Selecting the Right Materials for Your Metal Stamping Project

Learn about metals and their characteristics to help you choose the right option for your unique application.

Optical Sensor/Solenoid Valve aids in conveyor automation.

Designed for sensing objects moving through conveyor accumulation zones, OSV incorporates solid-state electronics and solenoid valve using logic and manual inputs to control pneumatic actuator. It detects variety of materials at distances up to 6 ft and may be cascaded up to 100 units. Along with modular design, product features multi-color LED indicators, self-aligning beam, adjustable valve...

Tee Valve is designed to minimize potential accidents.

Suited for continuous flow applications, Tee Valve assembly includes Type 546 ball valve connected to tee by reducer bushing. Safety plug, shipped on open end of valve, prevents leakage if valve is left open when system is started up. Available in PVC and CPVC body materials with EPDM valve seals, product is offered in 1 x Ã-½ in. through 8 x 2 in. sizes. Fully assembled unit, rated at 232...

Needle Valves target general utility service.

Offered in stainless and carbon steel, Series GU isolates and vents system media in instrument air, nitrogen header, lube oil, and general utility service applications. Two-piece knuckle joint drives hardened stem tip to create leak-tight seal, while non-rotating stem design minimizes seal wear and protects seat from galling. Available in straight and angle patterns, valves offer choice of end...

Circulator-Flange Ball Valve suits hydronic heating systems.

Models 8100 and 8111 feature 2-piece, brass-body, full-port design with free-floating flanges that facilitate alignment with circulator pump flanges. While 8100 has threaded-end and 8111 has soldered ends, both are designed to simplify isolation of circulator pumps for quick testing, repairs, or replacement without need to drain entire system. Sizes of Ã-¾, 1, and 1Ã-¼ in. are rated at...

Bronze Ball Valve meets clean water requirements.

Manufactured to meet ANSI/NSF Standard 61 for potable water, BA-100 NSF (threaded end) and BA-150 NSF (solder end) come in Ã-¼-2 in. sizes and feature glass-reinforced PTFE seats, blow-out proof stem, and adjustable stem gland. Products, rated at 600 WOG/150 SWP though 2 in., conform to standards of WW-V-35B and MSS SP-110. Built with ASTM-grade materials, valves also satisfy lead-leaching...

Hand Lever Ball Valve suits high-purity applications.

Constructed of 316 stainless steel and TeflonÃ-®, sanitary Series BV3HL has 3-piece design that allows central portion to swing out for maintenance while leaving ends clamped into line. PTFE cavity filler reduces threat of product entrapment in valve, which features 240 grit internal polish and polished clamp end connections. Rated for pressures to 1,000 psig and temperatures from -40 to...

More performance and functionality for Sinumerik 828D CNC

Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.