New Valves Products

Aventics Offers EV03 Electropneumatic Pressure Regulating Valve with a Hysteresis as Low as 0.7 psi

The EV03 Electropneumatic Pressure Regulating Valve is offered in models with an LCD display or LED indication. The unit is piloted externally and operated through poppet valve design and offers a pressure ranges from 0 to 145 psi. It is used for controlling pneumatic actuators, cylinders, brakes and clutches and features M12, 5-pin A-coded connector and IP65 electrical protection. The valve is...

New AxisPro Two-Stage Valves from Eaton Accommodates Flow Rates Up to 375 LPM

Eaton’s now offers AxisPro® Valves in D05 (NG10) and D07 (NG16) designs and Pro-FX® configure software. The valves help in filling the gap between the single-stage D05 and two-stage D08 valves. The units come with onboard motion control, sensors, diagnostic and communication. The Pro-FX Configure 2.0 is used for programming and configuring valves by following a streamlined, step-by-step...

Latest HBB Series Safety Valve Systems Prevent Alteration from Unauthorized Personnel

Ross’ Hydraulic Block and Bleed Series Valve Systems are offered in D03, D05, and D07 body sizes in port sizes SAE-8, SAE-12, and 1-1/4 Code 61 Flange. The units are used in external monitoring for redundant operation and features a position sensor. It is a redundant 3/2 nominally closed function valve system with a tamper-resistant design and a relief valve at inlet.

New Hydraulic HBH Series Safety Valve Systems Come with a Relief Valve on Inlet

Hydraulic HBH Series Block and Hold Valve Systems are available in D25 and D32 body sizes in 1-1/2 and 2, Code 62 flange port sizes. The units are designed for blocking valve systems in critical applications where hydraulically controlled cylinders’ safe loading is required. The position sensor of the unit is used for external monitoring. They are offered with enhanced tamper-resistant design...

Industrywide Applications for Deep Drawn Metal Stamping

Deep-drawn metal stamping applies a significant punching force to radically draw metal sheets into a die cavity. Finished components produced by this process tend to have a depth that exceeds their diameter, which is why manufacturers refer to it as "deep-drawn" metal stamping.

Qoisna Offers TPE-Coated-Stem Check Valves for EtO and Gamma Sterilization

The TPE-Coated-Stem Check Valves feature male luer lock outlet with a thermoplastic elastomer (TPE) coated stem. The unit’s stem avoids adherence of mating surfaces and improves sealing for an easy disconnection of luers. They are manufactured to ISO Class 8 Clean Room; BPA- and latex-free; REACH and RoHS standards. The valves minimize the risk of stress cracks at female luer connection.

CFRP Injection Molded Composite Replaces Machined Aluminum in Oil Control Valve

Metal-to-composite conversion reduces cost, weight, improves engine performance; material debuts at SPE ACCE this September Phoenix, Ariz. – An Asian automaker has replaced machined aluminum with a unique carbon fiber-reinforced composite in an injection molded oil control valve within the variable valve timing system that controls engine intake and exhaust. The high-performance thermoplastic...

New D4 Series Mix Proof Valves Come in Downward-Opening Design

D4 Series Mix Proof Valves consist of D4 and DA4 ultra-hygienic models and are designed for separation of dissimilar products. Units come with integrated seat lift detection and a control unit. D4 model offers reliable product separation with seat lift (SL) or non-seat lift (NSL) cleanability. The valves are fully balanced for dependable operation during spikes and flow in any direction and are...

Latest DV-ST UltraPure Valves from Alfa Laval are Suitable for Pharmaceutical Water Systems

DV-ST UltraPure Valves are available in 3 in. and 4 in. versions and reduce the risk of roughing due to high-quality welding. The valves save energy, simplifies installation and improve the efficiency of steam sterilization. Units reduce contamination risk from standard valves due to leak detection hole. UltraPure Valves are manufactured to pharmaceutical water systems standards.

New Closed Male Luer Lock Valves are Suitable for Gamma and EtO Sterilization

Qosina’s Closed Male Luer Lock Valves are designed for flushing and drainage applications to prevent dripping, leakage and restrict the free flow of fluids. Units connect directly to female luer lock or luer-activated valve. The valves eliminate the need for clamping or capping and are disconnected by twisting counterclockwise.

Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat

Bonomi launches Series S250 Check Valves with a cold-formed 316 stainless steel body gives users the highest Cv at the lowest cost. The spring-loaded FKM seat provides high flow capacity, minimal head loss and bubble-tight protection against reverse flow. They are available in six sizes and FNPT threaded from 1/2” to 2”. The valves rate to 250 WOG with an operating temperature range of -4...

Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard

Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.