New D4 Series Mix Proof Valves Come in Downward-Opening Design
D4 Series Mix Proof Valves consist of D4 and DA4 ultra-hygienic models and are designed for separation of dissimilar products. Units come with integrated seat lift detection and a control unit. D4 model offers reliable product separation with seat lift (SL) or non-seat lift (NSL) cleanability. The valves are fully balanced for dependable operation during spikes and flow in any direction and are...
Read More »
Latest DV-ST UltraPure Valves from Alfa Laval are Suitable for Pharmaceutical Water Systems
DV-ST UltraPure Valves are available in 3 in. and 4 in. versions and reduce the risk of roughing due to high-quality welding. The valves save energy, simplifies installation and improve the efficiency of steam sterilization. Units reduce contamination risk from standard valves due to leak detection hole. UltraPure Valves are manufactured to pharmaceutical water systems standards.
Read More »
Latest DV-ST UltraPure Valves from Alfa Laval are Suitable for Pharmaceutical Water Systems
DV-ST UltraPure Valves are available in 3 in. and 4 in. versions and reduce the risk of roughing due to high-quality welding. The valves save energy, simplifies installation and improve the efficiency of steam sterilization. Units reduce contamination risk from standard valves due to leak detection hole. UltraPure Valves are manufactured to pharmaceutical water systems standards.
Read More »
New Closed Male Luer Lock Valves are Suitable for Gamma and EtO Sterilization
Qosina’s Closed Male Luer Lock Valves are designed for flushing and drainage applications to prevent dripping, leakage and restrict the free flow of fluids. Units connect directly to female luer lock or luer-activated valve. The valves eliminate the need for clamping or capping and are disconnected by twisting counterclockwise.
Read More »
The Legacy Automation Playbook
How to Proactively Manage Your Legacy Industrial Control System
Read More »
New Closed Male Luer Lock Valves are Suitable for Gamma and EtO Sterilization
Qosina’s Closed Male Luer Lock Valves are designed for flushing and drainage applications to prevent dripping, leakage and restrict the free flow of fluids. Units connect directly to female luer lock or luer-activated valve. The valves eliminate the need for clamping or capping and are disconnected by twisting counterclockwise.
Read More »
Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat
Bonomi launches Series S250 Check Valves with a cold-formed 316 stainless steel body gives users the highest Cv at the lowest cost. The spring-loaded FKM seat provides high flow capacity, minimal head loss and bubble-tight protection against reverse flow. They are available in six sizes and FNPT threaded from 1/2” to 2”. The valves rate to 250 WOG with an operating temperature range of -4...
Read More »
Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat
Bonomi launches Series S250 Check Valves with a cold-formed 316 stainless steel body gives users the highest Cv at the lowest cost. The spring-loaded FKM seat provides high flow capacity, minimal head loss and bubble-tight protection against reverse flow. They are available in six sizes and FNPT threaded from 1/2” to 2”. The valves rate to 250 WOG with an operating temperature range of -4...
Read More »
Latest PVDF Ball Check Valves Come with Square Cut Seat
Hayward’s TC Series PVDF Ball Check Valves come in true union design featuring threaded or IPS Sch40/80 socket fusion end connections. Units are available in sizes ranging from 1/4 to 1 in. and features FPM O-Ring seals. Suitable for vertical installations, valves are rated to 150 psi pressure at 23°C temperature and can be operated up to 115°C temperature. These valves are used in waste...
Read More »
Latest PVDF Ball Check Valves Come with Square Cut Seat
Hayward’s TC Series PVDF Ball Check Valves come in true union design featuring threaded or IPS Sch40/80 socket fusion end connections. Units are available in sizes ranging from 1/4 to 1 in. and features FPM O-Ring seals. Suitable for vertical installations, valves are rated to 150 psi pressure at 23°C temperature and can be operated up to 115°C temperature. These valves are used in waste...
Read More »
New Super Centurion A-403 Fire Hydrant Allows Easy Seat Replacement or Traffic Repair
Mueller’s Super Centurion A-403 Fire Hydrant is available with a 5-1/4 in. main valve and a 3-way opening configuration. Unit features two-piece ductile iron upper barrel with nozzle section and fully encapsulated traffic flange, reversible main valve and automatic oil lubrication. The fire hydrant meets UL/FM/AWWA at 350psi operating pressure. New Resilient Wedge gate valve complies with...
Read More »
Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission
Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.
Read More »
