Industrial PCs fit in 1 or 2 units of vertical space.
LA/LB Series rack-mount PCs are available with CPU cards or motherboards ranging from 700 MHz Celeron(R) card to 1 GHz Pentium III(R). The 1U models come with two or three 7 cfm fans and 2U models are equipped with two or three 42 cfm fans. One 2U model has two 250 W hot-swap power supplies. All models provide locking front door to control access to power switches, one 5.25 in. drive bay, and one...
Read More »
Single Board Computers fit CompactPCI.
IBC 2800 family of 6U single-slot server blades use dual, low-voltage Intel(R) Pentium(R) III processors with 512 Kbyte cache. IBC 2801 system master and IBC 2802 peripheral master support Ethernet-switched, fabric-backplane architectures, are PICMG 2.16 packet-switched backplane and PICMG 2.9 IPMB compliant, and operate in stand-alone satellite operating modes. Both are suitable for...
Read More »CompactPCI Board offers multimedia power.
ICP-MMEDIA, with integrated MPEG-2 hardware decoding and optional CAN controller piggyback, can control video displays with resolutions up to 2048 x 1536 pixels. It addresses almost unlimited number of displays without loss of signal. GigaSTAR piggyback allows SBC to connect to flat panel displays at distances up to 90 m over twisted pair copper wire. SBC incorporates ATI Radeon VE graphics...
Read More »Carrier Board provides mass storage.
IPM-ATA multi-purpose 3U extension board plugs into single slot and houses IDE 2.5 in. hard dirves, microdrives, or solid-state IDE FLASH or Compact FLASH drives. Up to 2 devices, configured as master and slave, may be plugged in. Standard IDE ribbon cable connects IPM-ATA to rear I/O transition module of master rear I/O CompactPCI backplane connector, where embedded SBC's secondary channel of...
Read More »
Plastic Knobs
Knobs - Customizable Solutions To learn more about the different types of Knob solutions available, and which ones to select for your specific application, download this guide now.
Read More »
Single Board Computers have Intel(R) Pentium(R) processor.
Panther PC/104-Plus SBC is available in 2 versions. Fanless 266 MHz version has no moving parts, 0 to 60 deg C operation, and draws 24% less power than AMD K6 equivalent. Extended temperature version supports full -20 to +85Ã-
Read More »CPU Board offers processor speeds up to 1 GHz.
ICP-PIII 3U CompactPCI, Pentium III, Socket 370-based, single-board CPU features up to 256 MByte on-board BIOS controlled ECC SDRAM. It supports basic hot-swap and provides support on 3 serial networking levels including Fast Ethernet, FireWire and USB. Radeon-VE graphics controller offers multimedia capabilities. Besides standard analog interface, ICP-PIII board may be equipped with...
Read More »CPU Board comes in 6U form factor.
ICP-PIII-6U CompactPCI SBC features Pentium III multiprocessor in speeds from 566 MHz to 1 GHz, combined with Intel's 21554 non-transparent PCI-PCI bridge. Equipped with 128 MByte SDRAM and 2 Mbit FLASH for Phoenix BIOS, it can be expanded using memory piggyback modules providing up to 256 Mbyte SDRAM and up to 512 Mbyte FLASH. SBC is PC compatible and supports DOS, Windows NT/CE/2000, Linux,...
Read More »Boards turn PC into measurement system.
PCI-DAS6025 and PCI-DAS6023 plug into PCI slot. Both offer 16 channels of 12-bit A/D measurements that may be taken at rates to 200,000 samples/second. Eight discrete digital bi-directional I/O lines control relays and solenoids, and monitor switch and contact closures. Each board supports 2 counters. PCI-DAS6025 has two 12-bit analog outputs and additional 24 digital I/O lines. Applications...
Read More »
Embedded Board has biscuit (EBX) form factor.
EBC-7850 3.5 in. disk-size embedded board supports Socket 370-based Pentium(R) III processor or Celeron(TM) 400 processor. Intel(R) 815E chipset provides up to 133/100 MHz front side bus speeds and 133 MHz for system memory. A 144-pin SO-DIMM socket allows up to 256 MB of SDRAM support. EBC-7850 has on-chip VGA controller with up to 1600 x 1200 resolution at 256 colors, 10/100 Mbps Ethernet, and...
Read More »Computer Boards suit embedded applications.
Six PC/104 boards include: 90 W Power Distribution Vx for dc to dc power conversion; ipLINK Web Appliance Core I/O server for remote monitoring, maintaining and controlling Internet-enabled devices; GPS Interface carrier board for Global Positioning System receiver; PCMCIA 2-slot connector and controller board; CDMA Carrier module for wide-spectrum communications applications with fixed, mobile...
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
