Single Board Computers offer support for VME 2eSST.
Models V2G4c and V4G4c perform real-time data and signal processing. Measuring 6U, models come with two or four 500 MHz Motorola PowerPC 7410 (G4) processors with AltiVec vector processing units. Boards also provide 133 MHz local bus speed. Their on-board PowerPC processors utilize shared memory architecture, accessing up to 1 GB SDRAM memory. Bridges provide 120 MB/sec throughput between up to...
Read More »
4U Rack Mount Computer offers processor options.
RackMount 19 in. industrial computer is offered with 1.6 GHz or 2.2 GHz Intel Pentium 4 processor, in addition to 850 MHz Intel Pentium III CPU. It has space for 2 hard drive bays and 3 additional device bays. Computer comes standard with 10/100 BaseT Ethernet (RJ45) and 2 hot swappable fans in industrial enclosure. User can choose Microsoft Windows NT, 2000, or XP operating systems. OpenControl...
Read More »
Single Board Computer consumes small amount of power.
With built-in analog and digital I/O, LP3500 Fox is suitable for portable, handheld, battery-powered, and remote monitoring systems. It measures 3.65 x 2.60 x 0.45 in., consumes less than 20 mA, and uses less than 100 Â-µA in power-save mode. Computer has Rabbit 3000 microprocessor, with up to 512K each of Flash and SRAM, 26 digital I/O, A/D converter, PWM outputs, 6 serial ports, one relay,...
Read More »
CPU Board provides flexible I/O in 6U format.
Suitable for applications in process control, telecommunications, and traffic control, TVME-8240 VME CPU board offers MPC8240 PowerPC micro-processor, DRAM controller, and PCI interface. PowerPC Processor based IndustryPackÂ-® Carrier has 4 IndustryPack interfaces and supports 4 real-time operating systems (VxWorks, Linux, pSOS+, and OS9).
Read More »
Design Guide: Heat Sinks for High-Power Applications
Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.
Read More »
Digital I/O Board plugs into PC/104 slot or stack.
Model 104-IIRO-16 32-channel board provides change-of-state detection, 60 V optical isolation on input lines, and standard Form C SPDT relay outputs. Isolated, non-polarized inputs may be driven by dc sources of 3-30 V or ac sources at frequencies of 45 Hz to 10 kHz. The 16 input channels are available via 34-pin header, while relay outputs are available via 50-pin IDC type header. Board is...
Read More »CPU Board provides number crunching.
VMP2 VME 3U processor board is based on Motorola's MPC8245 Kahlua II microprocessor with PowerPC MPC603e core, operating at 330 MHz. Board delivers 450 Mips of performance while drawing only 5.8 W of power. It incorporates direct soldered 64-bit, 133 MHz SDRAM (up to 256 MB) featuring selectable in-line ECC controller. Dual channel programmable DMA controller provides range of mass data...
Read More »
Single Board Computer fits ConnectBus-® standard.
With only one plug, DPX-91 is suitable for embedded PC applications requiring easy serviceability and minimal downtime. In single operation, technician can remove unit and replace it with new or upgraded unit. Based on Intel Socket 370, computer will accept PentiumÂ-® III CPUs up to 1 GHz with 133 MHz front side bus. It has 3D graphics, DVD/MPEG2 playback, up to 64MB video memory, 1 GB RAM,...
Read More »
Single Board Computer extends PCI-X capabilities.
ePCI-100 half-size, IntelÂ-® 810E chipset-based SBC features Intel PentiumÂ-® III processor at 866 MHz, and meets PICMG 1.2 Embedded PCI-X specification. It has PCI bus with 32-bit support. ePCI-100 supports up to 512 MB of SODIMM memory, PCI Ultra DMA/66 IDE and CompactFlash(TM). It comes with integrated 2D/3D 64-bit CRT video controller with DVI output. Board includes 2 Intel 82559 ER...
Read More »Board-Support Packages suit embedded applications.
Windows CE 3.0 and Windows CE .NET board support packages are available for Graphics Master, Bitsy, and Graphics Client Plus StrongARM-based products. They include binary files, customer-specific source code, Windows CE kernel with Quick Fix Engineering components, sample code, device driver specifications, regular updates, and documentation on how to build Windows CE operating system images.
Read More »
Single-Board Computer is PICMG 2.16 compliant.
IBC 2400 CompactPCI 6U single-board computer features Sun Ultra SPARC IIe-based 64-bit processor operating at 500 MHz. It supports up to 2 GB of main memory and 14 MB of user Flash memory. Unit occupies either single master or peripheral I/O slot in standard CompactPCI chassis and supports full I/O hot swap. It auto-senses and operates as CompactPCI system slot or non-system slot SBC. Standard...
Read More »
Simple Connection – MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »
