Single Board Computer supports DDR SDRAM interface.
IBC 2802 6U single slot CompactPCIÃ-® peripheral master and PICMG 2.16 compliant server blade delivers Low Power Mobile Tualatin PentiumÃ-® III performance, 266 MHz double data rate (DDR) SDRAM, and Copperhead(TM) top-end server chipset. It also offers Coppertail(TM) Server Chipset, Gigabit and 10/100 Ethernet ports, and stand-alone Satellite operating mode. Chipset supports 64-bit/66MHz...
Read More »
Single Board Computer comes with prototyping area.
LAB PRO-51 has P89C51RB2BA processor, 16K bytes of Flash, 512 bytes of RAM, and prototyping area where user circuitry can be built and tested. On-chip Flash can be programmed by connecting board to PC serial port. Optional solderless breadboard can be mounted over prototyping area. All CPU lines are available at female header connectors, so jumper wires can connect to processor. Board includes 8...
Read More »
Single Board Computer offers 2 independent Ethernet ports.
Dual-E(TM) can function as bridge between separate 10Base-T networks, serve as firewall/router, or provide Ethernet and serial connectivity to existing equipment. TCP/IP functionality is provided by USNET(R) Embedded TCP/IP Protocol Suite. Intel 386Ex processor and DOS operating system provide environment for embedded development. Serial ports, counter/timers, and interrupt controller are fully...
Read More »
PC/104 CPU Card has built-in SVGA/TFT LCD video.
Model 4C61A 5X86-based CPU card is available with 32M or 64M bytes of system memory. Built-in video supports resolutions up to 1024x768 by 24 bits and video memory sizes from 512K to 4096K. Card offers 8M to 128M byte IDE flash drive and external IDE interface. Standard I/O includes 10/100 BaseT Ethernet port, two 16C550 compatible RS-232 serial ports, parallel port, 2 USB ports, and PS/2...
Read More »
Electronic Manufacturing Supply Chain Risk: Are You Vulnerable?
This white paper provides an in-depth overview into electronic manufacturing supply chain risks.
Read More »
PC/104-Plus Board works as Ethernet node.
Bobcat single board computer can be used as Ethernet node, I/O processor card, or combined with plug-in video module for applications requiring video display. Module has Elan SC520 low-power 133 MHz 586-class processor, 10/100 Ethernet, 64 MB of RAM, and DiskOnChip flash socket. I/O includes floppy, IDE, and 4 COM ports for RS-232/422/485. Board is software compatible with Windows, QNX, Linux,...
Read More »
Single Board Computer is built for Pentium(R) 4 processor.
SBC-9782 provides Socket-478 base for Pentium processors up to 2.0GHz, and supports it with Intel 8455 chipset, 2 DIMM sockets for up to 2GB of SDRAM, and on-board Type II connector for Compact Flash or IBM Micro Drive. It includes 32MB 4X graphics processor, built-in 3D engine with up to 3K x 2K resolution, and on-board MPEG 2/1 video decoder for VCD, DVD, and HDTV. Full-size board houses...
Read More »Controller Board suits PC/104-based microcomputer systems.
PCMCIA Dual Interface board adds PC card I/O functionality to PC/104 system. Featuring Intel(R) PD6722 chip, module is fully PC/104 form-factor compliant, and available with either 2 front-, right- or left-loading PCMCIA disk drives. It supports all Type I, II, and III PCMCIA memory; I/O; and ATA hard disk cards, which can support transfer of data and sharing of peripheral devices between...
Read More »
Single Board Computers have 256K Flash/128K SRAM.
OP6800 MiniCom C-programmable operator interface and single-board computer provides Internet/Ethernet connectivity and 24 industrialized, digital I/O. Also available without Ethernet connectivity, OP6810 MiniCom provides integrated control, display, and networking capabilities. Both models offer international-character 122 x 32 pixel LCD, user-relegendable keypad with 7-key/7-LED interface, 4...
Read More »
DC-to-DC Conversion Board suits PC/104-based computers.
Power Vx 90-watt power conversion board is designed with intelligent power management features. It offers greater than 90% efficiency, input voltage range of 9-60 V, 12-bit external input voltage monitoring, local temperature monitoring and reverse polarity protection on input. Manufactured in compliance with PC/104 form factor requirements, Power Vx supports +/-5 Vdc and +/-12 Vdc, and is...
Read More »
Power and Computing Platforms meet OEM requirements.
FUZION integrated power and computing platforms offer scalable open standards-based solutions for telecom, network, broadcast, CTI and medical/industrial sectors. eFUZION range offers 1U, 2U, 4U and 8U platforms comprising both ISA/PCI and CompactPCI architectures. nFUZION line is available in 4U and 8U CompactPCI versions and meets stringent space requirements. pFUZION includes On-Line Rack UPS,...
Read More »
5 and 13 Micron Resolve Columns with Greater Bed Stability
Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.
Read More »
