New Embedded Edge Server Technologies Designed for Extended Temperature Ranges
Available with conformal coating to protect against effects of salt water or condensation caused by large temperature fluctuations. Designed for digitization of upstream and midstream oil and gas industry. Offers comprehensive server class RAS features that enable OEMs to reliably manage thousands of devices remotely.
Read More »
New PL-50010 Fanless Embedded Computer is CE, FCC Class A, RoHS and UL/cUL Certified
Features 7th/6th Gen Intel Core i7/i5/i3 processor and two 260-pin SODIMM dual-channel DDR4 1866/2133MHz supporting up to 32GB of memory. Comes with 2x USB 2.0 and 4x USB 3.0 COM ports to provide serial connections for gathering and storing factory-line information. Data display capabilities include 2x HDMI and audio (1x line-out; 1x mic-in and with 2x GbE LAN, 4x USB 3.0, 2x USB 2.0 I/O...
Read More »
New Computer-on-Module Supports Low Power 25W Processors
COM-CFHB6 is combined with support for up to 48 GB DDR4 memory with ECC support. Features wide range of processors from Intel Celeron to Intel Xeon and the 8th and 9th Generation Intel Core processors. Supports four USB 3.1 Gen 2 ports and eight USB 2.0 ports, up to three display ports and up to 24 PCI Express 3.0 lanes.
Read More »
New AGS100T/AGS102T Gateways Feature Dimensions of 160 x 110 x 44mm
Features Intel® Atom™ x7-E3950/x5-E3940/x5-E3930, Pentium® N4200 and Celeron® N3350 series processors. Offer maximum reliability and longevity support, featuring wide-range operating temperature of 40°C to 70°C. Supports DIN-rail mount and wall mount as well as TPM 2.0.
Read More »Adhesive Tapes for Energy & Utility Applications
Read about the various types of tapes used in energy and utility applications.
Read More »
New BOXER-8170A Embedded Computing Solution Features NVIDIA Jetson TX2
Equipped with four PoE LAN ports and four USB 3.0 ports. Provides stability and flexibility for AI edge networks. Available with 8GB LPDDR4 memory and 32GB eMMC storage onboard as well assupports AI frameworks such as TensorFlow and Caffe.
Read More »
New CSB200-818 Fanless System with 12V-24V DC Terminal Block Power Input
Supports Intel® Atom™ processors E3930 & Pentium® N4200 / Celeron® N3350 Series. Offers wired and wireless connectivity with the two onboard RJ45 Gigabit Ethernet ports and dual mini PCIe slots. Suitable for 24/7 deployments such as in industrial automation and intelligent transportation applications.
Read More »
New C875 Rugged Single Board Computer from Aitech Ideal for military and defense applications
Operating temperature ranging from -40°C to +85°C. Integrated cybersecurity features for enhanced data protection. 3U VPX SBC comes with 8th Gen Intel Xeon E 2176M CPU.
Read More »
CPU Board integrates functional safety architecture.
Equipped with NXP QorIQ single-core or dual-core processor, Model CB30C runs at up to 1 GHz. Board includes up to 2 GB of soldered DDR3 with ECC support and up to 128 MB of boot Flash. Onboard event logger helps analyze errors. Conduction-cooled aluminum housing, based on VITA 59 RCE, complies with COM Express Basic form factor and type 6 pin-out. Fail-silent and fail-safe, rugged board is suited...
Read More »
Compact Embedded PC is used for Ethernet communication.
As PC-based controller in compact, Bus Coupler format for TwinCAT 3 automation software,- CX8190 employs 32-bit, 600 MHz ARM Cortex™-A9 processor;- hosts 512 MB RAM; and runs Windows-® Embedded Compact 7 OS. Ethernet port and- 2-port switch allow for real-time Ethernet or EtherCAT Automation Protocol (EAP), and programming is supported with TwinCAT 3 via fieldbus or Ethernet interface....
Read More »Rugged SBC with PC/104 Form Factor targets low-power applications.
Powered by dual core, 1 GHz DMP Vortex86DX3- SoC, HELIX- has expanded PC/104 form factor (4.0 x 4.0 in.) and offers PCIe MiniCard I/O expansion. VGA and LVDS display support is standard along with up to 6 USB 2.0, 2 RS-232/422/485, 2 RS-232,- 10/100Mbps Ethernet,- Gigabit Ethernet, and- SATA ports. Optional integrated DAQ circuitry includes sixteen 16-bit A/D channels with 100 KHz sample...
Read More »
Precision Machining Solutions with Over 25 Years of Experience
Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.
Read More »
