Windows CE Meets Moxa's Embedded Computers
In order to provide customers with a broader selection of products, Moxa is planning the release of Windows CE versions of their well-known UC-7400 family of ready-to-run embedded computers. The scheduled launch date is the latter part of Q1 of 2006. Moxa has chosen version 5.0 of the 32-bit, open-source, scalable Windows CE as the operating system for these new products. Software engineers can...
Read More »Motorola Sets Technology Direction to Address Evolving Communication Needs of Embedded Applications
LONG BEACH, Calif., Jan. 16 -- Bus & Board 2006 -- To meet the evolving communications needs of the embedded computing market, Motorola (NYSE:MOT) will extend its offerings to include MicroTCA-based communications servers that will complement its current and future VMEbus- based products. This coexistence strategy is designed to help equipment manufacturers and system integrators bring new...
Read More »MicroTCA Platform helps develop wireless/IMS applications.
Designed for wireless base station, MSPP, and IPPBX application evaluation/development, microTCA platform utilizes 12-slot microTCA chassis equipped with microTCA Carrier Hub (MCH) module, power supply, Fat Pipe switch module, application/protocol processing, and platform management software. Design allows for independent control and data plane operation, while MCH provides IPMI management,...
Read More »
SBC features Intel Core Duo Processor T2500.
Computer-On-Module ETXexpress-CD is equipped with Mobile Intel 945GM Express chipset, ICH7M Southbridge, 2 MB L2 cache, and up to 2 GB fast DDR2-SDRAM. Integrated interfaces include 7 PCIe x1 ports, PCI, LPC, 8 USB 2.0, 2 Serial-ATA, and 2 Parallel-ATA. TV-Out is supported in component, S-Video, and composite with HDTV support modes. Network connection is provided by fast Gigabit-Ethernet...
Read More »
Common Misconceptions About Custom Automation Systems
This guide will help you understand the capabilities of automation systems.
Read More »
Computer-On-Module complies with E-²Brain standard.
Model EB8347 RISC-based Computer-On-Module is based on Freescale MPC8347 processor with security engine. Features include integrated DVI graphics port, TTL flat panel interface, 2 USB 2.0 ports, 1,008 MIPS @ 533 MHz, 2 Gigabit Ethernet interfaces, and up to 256 Mb directly soldered DDR-SDRAM. With 0-70Ã-
Read More »
SBC is passively cooled and uses 4 W of power.
EMI-tolerant and RoHS-compliant ETX-LX Computer-on-Module features 500 MHz AMD LX800 processor, 4 x USB 2.0, DDR SODIMM storage module, and graphics integrated in AMD GEODE CS5536 chipset. Baseboard interface offers 10/100 Base-T Ethernet port, 2 serial TTL interfaces, and onboard CompactFlash slot that integrates up to 8 GB of non-rotating storage media. Pinouts on board include keyboard, mouse,...
Read More »
AdvancedTCA Carrier Board supports 4 AdvancedMC modules.
Expanding design options for telecom and network equipment manufacturers, Model AT8400 features PCI-Express and Gigabit Ethernet switching infrastructure and SAS controller. AdvancedMC-Bays can be populated with variety of field-replaceable modules. Suitable for dual-star and full-mesh configurations in 14- and 16-slot systems, board can be managed via SNMP, TELNET, CLI, either in-band or...
Read More »PC/104 Module offers 8 software-configurable serial ports.
Based on 16C654 quad serial port IC, Emerald-MM-8P PC/104 module works in PC/104-expandable embedded computer systems running Linux, Windows, QnX, VxWorks, and DOS. Each serial port can be individually selected for RS-232, RS-422, or RS-485 under software control. I/O addresses and interrupt levels are programmable, with interrupt sharing available for any number of ports. All configuration data...
Read More »Micro/sys 486/586 Computer Packs Powerful Data Acquisition, GPS, and Wireless Communication
Montrose, CA. (PRWEB) December 13, 2005 -- Based on a high-performance 486/586 core, the SBC4495 from Micro/sys provides a powerful, feature-rich controller in a 4.5” x 6.5” EPIC™-standard footprint. Eight channels of 14-bit A/D with simultaneous reads and eight channels of 14-bit D/A provide a highly accurate temperature-compensated data acquisition system. In addition, the on-board GPS...
Read More »
Single Board Computer suits graphics intensive applications.
Embedded ATX Model AR-B1891 supports Intel Pentium M/Celeron M processors, and is equipped with on-board ATI Mobility Radeon 9000 graphic chipset, as well as 64 MB DRAM dedicated for video. With 1.7 GHz Pentium M processor, average power consumption is less than 50 W. Onboard Protect-U provides security to effectively prevent software from being operated in other platforms. SBC is suited video...
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
