New Sensors / Detectors / Transducers Products

Water Quality Sensors keep clean with ultrasonics.

VisoTurb Turbidity Sensor and ViSolid Suspended Solids Sensor feature ultrasonic cleaning system that prevents accumulation of contaminants on optical windows. Both function with company's IQ SensorNet Systems that measure water and wastewater parameters at up to 20 locations. With wide measuring ranges of 0-4000 NTU and 0-300 g/l S102, respectively, sensors can be used to cover applications...

Web Tension Transducer handles narrow webs or filaments.

VNW Very Narrow Web tension transducer measures process tension in narrow web or ribbon (up to 6 in. wide) or filament. It can be installed on process machinery for unwind/payoff, rewind/take-up or intermediate zone applications. Tension is measured by high-output silicon strain gages housed internally on dual cantilevered transducer beam. Six different mounting styles are offered to accommodate...

Pressure Transducer measures up to 3,000 psi.

Model 227 is available with variable capacitance sensor that measures pressure in ranges from 0-25 to 0-3,000 psi gauge, absolute, or compound. Ranges from 0-7 to 0-200 bar are also available. Transducer weighs 6.5 oz and stands 3.6 in. high. It has small swept sensor chamber made of 316L SS that is electropolished to 5Ra finish for contaminant free operation, making it suitable for high purity...

Static Pressure Probe mounts in ducts.

Model 267 Series low differential pressure transducers have integral static pressure probe made of extruded aluminum that mounts in most ducts. Probe features baffle at tip to minimize velocity pressure errors, and gasket to seal against duct, preventing leakage and providing accurate measurements. Probe is 7.8 in. long and 1/4 in. in dia, making it suitable for typical duct sizes. Transducers...

The Benefits of Pre-Engineered Systems

Learn more about our pre-engineered thermal fluid system options.

Sealed AC-LVDTs offer 0.01% (full scale) repeatability.

HSAR 750 Series AC-in/AC-out Hermetically Sealed AC-LVDTs are constructed of stainless steel for environmental robustness. These 3/4 in. position sensors feature radially-mounted electrical connectors, which permit through-bore operation. LVDTs are accessible from both ends to permit mechanical support and core guidance, and are open at both ends for cleaning. They are offered in full scale...

Speed Sensor measures turning speeds from a distance.

SpeedVue Model 430 uses Class III laser in conjunction with signal processing to measures shaft rpms on highly polished shafts from up to 100 ft away. Signal-processing algorithm required is built into Model 2120A portable RBMconsultant data collector/analyzer. Sensor can be used to measure turning speeds of pulleys, as well as linear speeds of felts on paper machines.

Disposable Gas Detector is maintenance-free.

Eikon single-gas detector is suited for bump testing in presence of gas. Optional accessory provides automatic calibration, zeroing and status reporting without additional computers. Eikon's design incorporates cam grip clip mechanism, double chamber sounder resulting in audible alarm (94 dB at 1 ft), and 4 high-intensity LEDs visible from various viewing angles. It is available in versions to...

Point Level Sensors are explosion-proof.

RF (radio frequency) level controls include RF 9200 and RF 11000/12000 Series, offer covers that do not need to be removed for calibration, which is accomplished through magnetic calibration technique. Remote Probes are listed as intrinsically safe. Remote versions of RF Series are available for high temperature applications over 1000Ã-

Plug-in Transducers reduce installation time.

786 Series transducers can convert 0-10 V or 4-20 mA signals into isolated 0-10 V, 0-20 mA, or 4-20 mA signal with isolation rating of 4kV. It can be plugged directly onto terminal block assembly using base receptacle blocks that are 15, 20, or 25 mm wide. Modules are protected against mismating and can be replaced in single operation during maintenance without affecting wiring. Touchproof test...

InGaAs Photodetector Array suits NIR spectroscopy.

Model ISC0007-GS1024 1024 x 1 array includes readout integrated circuit, InGaAs detectors, and bump-bonded hybridization. It provides spatial resolutions and dynamic ranges to meet DWDM optical quality monitoring demands, and allows complete elimination of temperature stabilization without performance degradation. Array is available in standard package (GS), unpackaged (GU), or full custom...

High or Low Volume Custom Crates and Boxes Available from Reid Packaging

Reid provides mil-spec crates and corrugated boxes in custom dimensions from single to triple wall and will even package them on-site. Check out the video to learn more.